Kenmore 10657572791 refrigerator Parts

For Kenmore model 10657572791, the most accurate way to confirm cubic feet (capacity) is to look up the listed capacity in the 10657572791 owner's manual. If you need a quick estimate, we can calculate it by measuring the usable interior space and converting cubic inches to cubic feet.

Capacity is typically listed as “total capacity” and may also be broken out by refrigerator and freezer sections. Use the 10657572791 owner's manual to match the published capacity to your exact configuration.

Measure the usable interior space (not the outside cabinet).

• Empty the section you are measuring (fresh food or freezer)
• Measure width x height x depth in inches
• Subtract space taken by fixed features (ice maker housing, air tower, thick door bins)
• Multiply the three numbers to get cubic inches
• Divide by 1,728 to convert to cubic feet

• Includes: usable refrigerated and freezer air space inside the cabinet
• Does not include: exterior dimensions, door thickness, insulation, or the space behind drawers and panels that you cannot use
• May vary slightly: depending on shelves, bins, and ice maker setup

Knowing cubic feet helps us match the right parts and accessories (like shelves, bins, and ice storage) and set realistic expectations for food storage. For example, if your ice storage is damaged or missing, the correct replacement for this model is the refrigerator ice bin WPW10670845.

Last updated: January 2026

If your Kenmore side-by-side refrigerator model 10657572791 ice maker isn’t making ice, the most common causes are a shutoff water supply, a frozen fill tube, a blocked ice bin, or a failed ice maker assembly. Start with simple water and temperature checks before replacing parts.

• Confirm the freezer is cold enough; target 0°F for reliable ice production.
• Make sure the ice maker is turned ON (bail arm down or switch on, depending on style).
• Verify the household water shutoff valve is fully open and the supply line isn’t kinked.
• Check the fill tube behind the ice maker for an ice plug (a common no-ice cause).
• Empty and reseat the ice container so cubes are not jamming the mechanism.

Use the 10657572791 owner's manual to locate the ice maker controls, fill tube area, and any model-specific reset steps.

If the ice maker itself has stopped cycling or won’t harvest cubes, replacing the ice maker assembly - refrigerator ice maker by whirlpool 4317943 is the most direct fix for this model.

An ice maker that can’t fill or harvest often indicates a water flow restriction or a freezing issue. Fixing the root cause prevents repeat failures, leaks, and ice buildup in the fill tube.

Last updated: January 2026

If your Kenmore refrigerator model 10657572791 is not getting cold enough, the most common causes are restricted airflow (dirty condenser coils or blocked vents), a failed evaporator fan, or a defrost problem that lets frost choke the evaporator. Start with cleaning and airflow checks before testing parts.

• Set the controls to a normal mid setting and give the unit 24 hours to stabilize.
• Make sure food packages are not blocking the return vents in the fresh food section or the air tower in the freezer.
• Confirm both doors close fully and the gaskets seal all the way around.
• Clean the condenser coils and make sure the condenser fan area is not packed with dust.
• Listen for the evaporator fan in the freezer; it should run when the compressor is running.

If the basic checks do not fix it, these model-matched parts are common suspects:

• Refrigerator thermostat WP2198202 if temperatures swing or the compressor cycles incorrectly
• Refrigerator evaporator fan blade WP2169142 if the fan runs but airflow is weak or noisy
• Refrigerator defrost bi-metal WPW10225581 if the evaporator keeps icing over
• Refrigerator heater WP2323198 if the unit is not defrosting and frost blocks airflow

Low cooling is usually an airflow or defrost issue; fixing it early helps prevent food spoilage and reduces compressor run time, which can lower energy use and wear on sealed-system components.

For model-specific access points, diagnostic steps, and control settings, follow the 10657572791 owner's manual.

Last updated: January 2026

On a Kenmore 10657572791 refrigerator, the SY EF (sometimes shown as 5Y EF) code points to a problem in the evaporator fan circuit. Most often, the evaporator fan is not running correctly, so cold air is not being moved through the refrigerator and freezer.

• Power reset: Unplug the refrigerator (or turn off the breaker) for 5 minutes, then restore power.
• Listen for the evaporator fan: With the freezer door switch held closed, you should typically hear the fan running.
• Look for frost buildup: Heavy frost on the freezer back panel often indicates a defrost problem that can stop airflow.
• Check for ice blockage: Ice around the fan area can prevent the blade from turning.
• Inspect wiring/connectors: Loose or corroded connections at the fan motor or control can trigger the code.

If you confirm the fan area is icing up or airflow is restricted, these model-compatible parts are commonly involved:

• Refrigerator evaporator fan blade WP2169142
• Refrigerator defrost bi-metal WPW10225581
• Refrigerator heater WP2323198

The evaporator fan is what distributes cold air from the evaporator coil. When the fan circuit has a fault, temperatures rise, food can spoil faster, and the compressor may run longer than normal.

For Kenmore 10657572791, we recommend following the diagnostic and access steps in the 10657572791 manual. It helps you locate the evaporator fan area, identify connectors, and confirm the correct checks before replacing parts.

Last updated: January 2026