Can you still get parts for a Kenmore dishwasher?
Yes. You can still get replacement parts for Kenmore dishwashers, including the Kenmore 66513259K113 undercounter dishwasher. The key is matching parts to your exact model number so the fit, electrical connections, and water routing are correct; our 66513259K113 installation guide also helps you confirm connection and clearance requirements.
What you need to order the right part
To avoid wrong-part returns, we recommend confirming these details before you buy:
- Full model number: 66513259K113 (from the model tag)
- Symptom (won’t drain, not filling, leaking, poor cleaning, door dropping)
- Where the issue shows up (bottom of tub, under the door, at the sink drain)
- Whether the dishwasher is hardwired or plugged in (installation method)
- Any recent changes (new disposal, new flooring, moved unit)
Common Kenmore dishwasher parts that are still available
These are frequent replacements for this model when performance drops or a leak develops:
| Problem you see | Part that often fixes it | Example part for 66513259K113 |
|---|---|---|
| Water left in tub | Drain pump or drain hose | Dishwasher drain pump WPW10348269 |
| Not filling or fills slowly | Water inlet valve | Dishwasher water inlet valve W11175771 |
| Poor wash coverage | Spray arm or filter | Dishwasher spray arm WPW10491331 |
| Leaks at the bottom of the door | Lower door seal | Seal WPW10497235 |
Why model matching matters (especially on dishwashers)
Dishwashers are sensitive to small differences in mounting, hose routing, and electrical connections. For example, the installation instructions call out requirements like a grounded electrical supply, keeping drain and water lines away from the motor/legs, and maintaining cabinet clearances so the unit sits level and does not shift during operation. Using the correct model-matched parts helps everything line up the way it was designed.
Quick checks before you replace anything
These steps prevent repeat failures after you install a new part:
- Confirm the dishwasher is level front-to-back and side-to-side.
- Make sure the drain hose is routed correctly and not kinked.
- Verify the unit is secured to the countertop or side cabinets so it cannot shift.
- If the home can freeze, protect the dishwasher and water lines from freezing.
Last updated: February 2026
Is it worth repairing a Kenmore dishwasher?
Yes, repairing a Kenmore undercounter dishwasher model 66513259K113 is usually worth it when the unit is in decent condition and the repair is a common wear item (drain, fill, racks, seals). If the repair cost approaches half the price of a replacement, replacement makes more sense.
Quick way to decide (cost, age, and what failed)
We use these practical checkpoints:
- Age: Under ~10 years old typically favors repair; over ~10 to 12 years old depends on condition and repair type.
- Repair cost: If parts and labor are under 50% of a comparable new dishwasher, repair is usually the better value.
- Failure type: Leaks, no-drain, and poor cleaning are often fixable with targeted parts.
- Overall condition: Rusted racks, cracked tub, or repeated electrical issues push toward replacement.
- DIY ability: If you can safely do basic checks, you can often reduce total cost.
Common repairs that are often worth it on 66513259K113
These are frequent, straightforward fixes that typically restore performance:
| Symptom | Likely area | Example part for this model |
|---|---|---|
| Won’t drain / water left in tub | Drain path, pump, hose | Dishwasher drain pump WPW10348269 or dishwasher drain hose 8269144A |
| Not filling / fills slowly | Water supply, inlet valve | Dishwasher water inlet valve W11175771 |
| Dishes not getting clean | Spray, filtration, diverter | Dishwasher spray arm WPW10491331 or dishwasher filter W10872845 |
| Door drops open or won’t stay up | Door balance system | Dishwasher door balance link 8194001 |
Checks to do before you buy parts
These steps can prevent an unnecessary repair:
- Confirm the door is fully closed and latched before starting a cycle.
- Verify the house breaker/fuse is good.
- Make sure the water supply valve is turned on.
- Start the shortest cycle; after about 2 minutes, open the door and confirm there is water in the bottom of the tub.
- If the unit was installed recently, confirm it is secured and centered so the door operates smoothly.
For the model-specific startup and “does not operate” checks, follow the 66513259K113 installation guide.
Why it matters
A dishwasher repair is usually a good investment when it restores core functions (fill, wash, drain, heat) without chasing multiple failures. On the other hand, replacing a major assembly plus additional issues often costs more than the reliability you gain.
Last updated: February 2026
How do I find the model number on my 66513259K113?
Your Kenmore dishwasher’s model number is printed on the appliance’s rating label; on most undercounter dishwashers like model 66513259K113, that label is found around the door opening (often on the tub frame edge) and is easiest to read with the door fully open. For label locations and diagrams, use the 66513259K113 installation guide.
Where to look on the dishwasher
Check these common label spots first (door open):
- Along the left or right tub frame (the vertical edge the door seals against)
- On the top edge of the tub opening, just under the countertop
- On the inner edge of the door itself (near the latch area)
- Behind the lower access panel area (less common, but possible)
What the model number looks like
On Kenmore dishwashers, the model number is typically a long number with letters. For your unit, it will match the format shown on this page.
| Label item | What to record | Example for your dishwasher |
|---|---|---|
| Model | Full model identifier | 66513259K113 |
| Serial | Unique unit ID | (varies by unit) |
Tips to read the label clearly
- Wipe the label gently with a damp cloth to remove film or detergent residue
- Use a flashlight and read from an angle to reduce glare
- Take a phone photo and zoom in to confirm every character
- Write it down exactly, including any letters at the end
Why it matters
We use the exact model number to match the correct diagrams and parts for your dishwasher, including items like the dishwasher water inlet valve, drain hose, and electronic control. One missing character can pull parts for a different production run.
Last updated: March 2026





