Kenmore 11028812790 washer Parts

Yes. Your Kenmore top load washer model 11028812790 uses a self-cleaning lint filter, so there is no removable filter to pull out and rinse. Lint is trapped during washing and rinsing, then flushed out automatically through the drain (details are in the 11028812790 owner's manual).

This design filters lint out of the wash water without a user-accessible screen or cartridge.

• Lint is captured while the washer agitates and deep rinses
• The washer flushes the trapped lint out through the drain
• No routine filter cleaning is required
• If you are looking for a “pump filter,” this style typically does not have one

A self-cleaning lint filter does not prevent every drain issue. If the washer is slow to drain, won’t drain, or leaves debris behind, focus on the drain path and agitation performance.

• Check the drain hose for kinks, clogs, or a crushed section
• Confirm the standpipe or laundry tub is not backing up
• Listen for the drain pump running during drain
• If agitation is weak, lint and soil can redeposit on clothes
• If the washer will not spin or drain, the lid switch circuit is a common cause

Knowing this washer has a self-cleaning lint filter helps you avoid taking the machine apart looking for a “hidden filter.” When performance issues show up, you get faster results by checking the drain pump, lid switch, and hose routing instead.

Last updated: February 2026

For Kenmore model 11028812790, a “hard reset” is simply a power reset: disconnect power briefly, then restart the washer. This clears many temporary control glitches; it will not fix a failed lid switch, drain pump, or drive system problem.

• Turn the washer OFF.
• Unplug the power cord from the outlet.
• Wait 2 to 5 minutes.
• Plug the washer back in.
• Set a cycle and pull the Cycle Selector (Timer) knob out to start.

If you need the exact start/stop method for your control style, follow the operating steps in the 11028812790 owner's manual.

A reset helps when the control is “stuck”; if the washer still will not agitate, spin, or drain, a part issue is more likely.

• Won’t spin or agitate: lid safety circuit problem; check the washer lid switch WP3949238.
• Won’t drain or leaves water in tub: pump or blockage; inspect the washer drain pump WP3363394 and hoses.
• Motor runs but washer won’t move: drive coupling worn; check the coupling 285753A.
• Agitator moves poorly or “ratchets”: worn agitator dogs; check the agitator dog 80040.

A power reset is fast and safe, and it helps rule out a simple control hiccup before you spend time on deeper troubleshooting or replacing parts.

Last updated: February 2026

To identify your Kenmore washer model, we look for the model and serial number plate on the washer cabinet and record the full model number exactly as shown (for example, 11028812790). This number is what we use to match the correct parts, diagrams, and instructions.

Most Kenmore top-load washers like model 11028812790 have a model and serial number plate on the washer cabinet (not on the lid itself). Use the location guidance in the 11028812790 owner's manual.

Common places to check:

• Under the lid, around the tub opening
• Along the top rim of the cabinet near the lid hinge
• On the back of the washer cabinet
• Inside the lid area on the cabinet frame

Write down the model number exactly, including all digits. A single missing digit can point to a different Kenmore design and the wrong replacement parts.

What to record:

• Model number (example: 11028812790)
• Serial number (helps confirm production run)
• Date of purchase (useful for service history)

Once you confirm the model number, match parts by description and symptom. For example, if the washer will not spin or start, a common item to check on many Kenmore designs is the lid switch; see the washer lid switch WP3949238 if it applies to your diagnosis.

Kenmore model numbers determine the correct fit, wiring style, and mechanical design (agitator, drive system, and controls). Using the exact model number prevents returns and speeds up repairs.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use and basic maintenance. For Kenmore model 11028812790, keeping loads balanced, using the right detergent amount, and addressing small leaks or noises early helps you reach the high end of that range; see the 11028812790 owner's manual for care guidance.

Most washer life is driven by usage and wear on the drive system, drain system, and suspension.

• Light use (few loads/week): often closer to 15 years
• Heavy use (daily loads): often closer to 10 years
• Overloading and chronic unbalance: shortens life by stressing the basket, clutch, and gear case
• Poor drainage or frequent clogs: strains the drain pump and can lead to leaks
• Hard water and excess detergent: increases residue buildup and odor issues

On a top-load Kenmore washer like model 11028812790, these parts often decide whether a repair is simple or more involved:

These habits reduce strain on the motor, coupling, clutch, and tub components.

• Keep loads evenly distributed; wash bulky items with a few towels to balance
• Use HE detergent only if your detergent label calls for it; otherwise measure carefully and avoid oversudsing
• Check fill hoses and drain hose routing for kinks; fix small leaks quickly
• Leave the lid open between loads to help the tub dry and reduce odor
• If the washer starts banging, pause and rebalance the load before continuing

A washer near the 10 to 15 year mark can still run well, but small issues (slow drain, slipping agitation, intermittent no-spin) often signal normal wear. Catching those early usually prevents secondary damage to the basket drive, clutch, and gear case.

Last updated: February 2026

The Kenmore washer model 11028812790 is a top-load, agitator-style washer; most Kenmore 110 direct-drive washers of this design are about 3.2 to 3.5 cu. ft. capacity. For the exact capacity rating tied to your specific configuration, use the specs and identification details in the 11028812790 owner's manual.

We recommend using the model and serial information plate and the manual specs so you match the correct capacity for your exact build.

• Locate the model and serial number plate on the washer cabinet (often under the lid area).
• Match the model number exactly: 11028812790.
• Check the specifications section in the 11028812790 owner's manual.
• If you are comparing to a newer washer, note that older, classic top-load designs often list capacity differently than modern high-efficiency models.
• Use the capacity estimate only for planning load size; use the manual for any installation or space planning.

This washer family includes multiple tub and agitator configurations. The manual describes different agitator styles used across “extra-large capacity” models, which is why capacity can vary by configuration even within similar-looking machines.

Knowing the cubic feet helps you avoid overloading (poor cleaning, out-of-balance spin) and choose the right cycle and water level. It also helps when comparing replacement parts and performance expectations for a classic Kenmore direct-drive washer.

Last updated: February 2026