Kenmore 10658582890 side-by-side refrigerator Parts

For Kenmore model 10658582890, the most reliable way to get the exact cubic-foot capacity is to look it up in the model’s specifications section of the 10658582890 owner's manual. If you only have the model number and no spec sheet, you can still estimate capacity by measuring the interior and converting cubic inches to cubic feet.

• Check the manual specs: Capacity is typically listed as “total capacity” and sometimes split into “refrigerator” and “freezer” sections.
• Look at the model/serial label: The manual shows the label is on an inside side wall area; use that full model number when searching specs.
• Measure and calculate: Useful when labels are worn or you are comparing similar units.
• Compare by product type: Most side-by-side refrigerators commonly fall in the 20 to 26 cu. ft. range.

1. Empty the compartments enough to measure accurately.
2. Measure interior width x interior depth x interior height (in inches) for:
   • Fresh food section
   • Freezer section
3. Multiply each section’s measurements to get cubic inches.
4. Add the two sections together.
5. Divide by 1,728 to convert to cubic feet.

Cubic feet helps us match the right replacement parts and accessories (like shelves, bins, and ice storage) and it also helps when comparing energy use and storage needs across refrigerator models.

Last updated: January 2026

Kenmore side-by-side refrigerator model 10658582890 is approximately 32 in. wide, 65-3/4 in. high, and 26-5/8 in. deep (cabinet). For the most accurate fit, confirm clearance and door-swing space in the 10658582890 owner's manual.

Use these measurements as your starting point, then add clearance for airflow, door swing, and water line connections.

• Width: 32 in.
• Height: 65-3/4 in.
• Depth: 26-5/8 in.
• Ventilation clearance: allow about 1/2 in. on each side and at the top
• Door swing clearance: if next to a fixed wall, allow about 2 in. minimum on the hinge side (varies by setup)

Correct dimensions and clearances help your 10658582890 cool efficiently, reduce compressor run time, and prevent installation headaches like doors that will not open fully or a pinched ice maker water line.

Last updated: January 2026

Most Kenmore side-by-side refrigerators are about 32 to 36 inches wide; the exact cabinet width varies by model and trim. For your Kenmore 10658582890, use the dimensions listed in the 10658582890 owner's manual to confirm the precise width for your kitchen opening.

Most side-by-side refrigerators fall into these common width buckets:

• 32 to 33 inches: space-saving models
• 35 to 36 inches: most common full-size width
• 36+ inches: larger-capacity or premium configurations

When you measure, plan for clearance and door swing, not just the cabinet width.

• Measure the opening width at the front and back (walls are not always square)
• Allow at least 1/2 inch of space on each side and at the top for ventilation (common requirement for this style)
• If installed next to a fixed wall, plan about 2 inches minimum on the hinge side so doors can open fully (varies by setup)
• Include room behind the unit for the water line if you have an ice maker
• Confirm the depth with doors and handles if you are trying to align with counters

Use a tape measure and record these numbers:

• Opening width (left-to-right)
• Opening height (floor-to-cabinet)
• Opening depth (wall-to-front edge)
• Door swing clearance (hinge side)
• Pathway width (doorways/hallways) for moving the refrigerator

Choosing the right width prevents installation headaches like doors that hit walls, poor airflow that hurts cooling performance, and not having enough room for the ice maker water line.

Last updated: January 2026