Kenmore Elite 66513163K701 dishwasher Parts

You can find the model number for your Kenmore Elite dishwasher on the rating label located just inside the door opening on model 66513163K701. On most units, the label is on the left-hand side and also lists the serial number.

Where to look (fast checklist)

• Open the dishwasher door fully.
• Look along the inner frame of the tub opening (not the outer door panel).
• Check the left side first; that is the most common location.
• Look for a printed sticker or metal tag labeled Model and Serial.
• Write the model number exactly as shown (letters and numbers).

What the label typically includes

Label item	What it’s used for	Example of why it matters
Model number	Ensures correct parts fit	Matching a drain hose or control to your exact unit
Serial number	Identifies production details	Helps confirm version and compatible revisions
Electrical ratings	Confirms power requirements	Useful during installation or troubleshooting

Why it matters

We use the exact model number to match the correct Kenmore Elite dishwasher parts and diagrams for your unit. Even small model-number differences can change fitment for items like a drain pump, water inlet valve, or upper rack components.

Helpful tip for parts and service

• Take a clear photo of the rating label before ordering parts.
• If the label is hard to read, wipe it gently with a damp cloth and dry it.
• Use the model number exactly as printed when referencing the 66513163K701 owner's manual.

Last updated: February 2026

Yes. The Kenmore Elite dishwasher model 66513163K701 uses an Ultra Wash triple filtration system with an upper filter assembly and a lower filter; cleaning these filters when they look dirty or wash performance drops helps keep water flowing and dishes coming out clean. See the 66513163K701 owner's manual for the exact filter location and removal steps.

What filter system this dishwasher uses

Your dishwasher has a 2-piece filter set:

• Upper filter assembly: catches oversized items and fine particles before they reach the pump
• Lower filter: helps keep food from being recirculated back onto dishes
• Maintenance is normal: filters are designed to be cleaned periodically to maintain peak cleaning performance

When to clean the filter

Clean the filter when you notice any of these symptoms:

• Visible debris or soils on the upper filter assembly
• Gritty residue on glasses or plates
• Reduced cleaning performance (food still on dishes)
• Slow draining or standing water after a cycle
• Unusual noises during wash (debris contacting the filter area)

Basic cleaning steps (typical for this filter style)

We recommend following the manual for your exact twist-lock and tab locations, but the process is typically:

• Remove the lower rack for access
• Turn the upper filter assembly to unlock (often about a quarter turn) and lift it out
• Lift out the lower filter
• Rinse both under warm running water; use a soft brush if needed
• Reinstall the lower filter, then lock the upper filter assembly back in place

Quick reference: what each filter does

Filter part	What it does	What you might notice when it is dirty
Upper filter assembly	Keeps debris out of the pump	Poor wash, debris visible on filter
Lower filter	Reduces recirculation of food	Gritty dishes, soils redepositing

Why it matters

A clogged filter restricts circulation and can let soils redeposit on dishware. Keeping the filter clean helps the wash motor and spray system do their job efficiently, which improves cleaning and can reduce noise.

Last updated: February 2026

For Kenmore Elite dishwasher model 66513163K701, the cabinet opening is typically about 24 inches wide, 24 inches deep, and about 34 inches high (floor to underside of countertop). For the exact cutout and leveling details for your installation, use the installation guide.

Typical opening size and what it means

Most built-in Kenmore 665-series dishwashers are designed for a standard 24-inch opening. Your final fit depends on leveling legs, flooring thickness, and countertop clearance.

• Width: plan for a standard 24-inch opening (often just under 24 inches)
• Depth: plan for about 24 inches to align with standard cabinets
• Height: plan for about 34 inches, then fine-tune with leveling legs
• Side clearance: keep hoses and wiring routed so they do not rub the motor or legs
• Flooring: do not install over carpet; keep the motor from touching the floor

Quick checklist before you measure

Use a tape measure and confirm the opening in three places (front, middle, back) because cabinets can be out of square.

• Measure width at the top and bottom of the opening
• Measure depth from the cabinet face frame to the back wall
• Measure height from finished floor to the underside of the countertop
• Confirm the unit can slide in without pinching the drain hose or water line
• Verify the floor is solid and level so the door seals correctly

Common dishwasher opening targets (reference)

Measurement	Typical target	Why it varies
Width	~24 in	Cabinet tolerances, side panels
Depth	~24 in	Plumbing clearance, cabinet style
Height	~34 in	Leveling legs, flooring thickness

Why it matters

Correct opening dimensions prevent installation problems like a door that will not close squarely, leaks at the tub seal, or vibration from the motor contacting the floor. Following the cutout and routing guidance in the 66513163K701 owner's manual also helps avoid pinched hoses and poor draining.

Last updated: February 2026

Yes. We still carry replacement parts for many Kenmore dishwashers, including the Kenmore Elite 66513163K701. The key is matching parts to your exact model number so you get the correct fit and function for items like drain components, racks, spray arms, and seals; confirm details in the 66513163K701 owner's manual.

How to make sure you order the right part

Use your full model number (66513163K701) and then match the part by name and ID.

• Check the model tag inside the door (usually on the tub frame)
• Match the part by function (drain, fill, wash, rack hardware)
• Compare the part ID on the listing to your original part when possible
• If symptoms point to a system (drain or fill), troubleshoot before ordering
• Use the diagrams for your model to avoid look-alike parts

Common Kenmore Elite 66513163K701 parts we see customers replace

These are frequent wear or failure items on dishwashers.

Symptom	Likely system	Example model-matched part
Won’t drain, standing water	Drain system	Dishwasher drain pump WPW10348269
Slow drain or leaks at drain connection	Drain hose	Dishwasher drain hose 8269144A
Poor cleaning, weak spray	Wash/spray	Dishwasher spray arm WPW10491331
Not filling or fills slowly	Water inlet	Dishwasher water inlet valve WPW10158389
Dishes gritty, debris recirculating	Filtration	Filter W10872845

Why it matters

Kenmore dishwashers were built across multiple platforms, so “Kenmore dishwasher parts” is not specific enough. Using the exact model number (66513163K701) prevents ordering a similar-looking part that mounts differently, uses a different connector, or changes wash performance.

Last updated: February 2026

Yes, repairing a Kenmore Elite dishwasher like model 66513163K701 is usually worth it when the problem is a common wear item (drain, fill, spray, rack parts) and the repair cost stays well below the price of a replacement. It is less worth it when multiple major components fail at once or when the repair requires high-cost electronics or motor work.

Quick way we decide: cost, age, and what failed

Use these practical checkpoints (they work well for most Kenmore 665-series dishwashers):

• Under 5 years old: repair almost always makes sense.
• 5 to 10 years old: repair if it is a single, clear failure (pump, valve, hose, spray arm).
• Over 10 years old: repair only if the fix is straightforward and low-cost.
• One major part vs. multiple symptoms: one part is a good bet; multiple issues often point to bigger wear.
• Water on the floor: fix quickly; leaks can damage cabinets and flooring.

For model-specific maintenance and troubleshooting steps, follow the 66513163K701 owner’s manual.

Typical repair scenarios for this model

These are common “worth repairing” fixes because they are targeted and parts are available:

• Not draining: replace the drain pump (dishwasher drain pump WPW10348269)
• Slow or incomplete draining: inspect/replace a drain hose (routing, kinks, clogs)
• Not filling: replace the water inlet valve (dishwasher water inlet valve WPW10158389)
• Poor cleaning: clean/replace the filter cup (filter W10872845) and check the spray arm
• Weak spray or no rotation: replace the spray arm (dishwasher spray arm WPW10491331)

When replacement is the better value

Replacement typically makes more sense when any of these are true:

• The dishwasher needs a motor plus another major part (stacked costs)
• You have repeated electrical issues (blown fuse, intermittent power, control problems)
• The tub or inner door panel is leaking from corrosion damage (repair becomes invasive)

Cost-to-replace comparison (simple rule)

If your repair total is…	Our recommendation
Under ~25% of a new dishwasher	Repair
~25% to 50%	Repair if the unit is under ~10 years old
Over ~50%	Replace

Why it matters

A dishwasher repair is usually a good investment because a single failed part (pump, valve, hose, filter, spray arm) can stop performance completely, even when the rest of the machine is still in good shape. Targeted repairs restore cleaning and draining without the cost and hassle of replacement.

Last updated: February 2026

Kenmore Elite dishwasher model 66513163K701 was manufactured for Kenmore by Whirlpool. Kenmore is the brand name on the dishwasher, and the 665 model prefix identifies Whirlpool as the original manufacturer for this unit.

How we identify the manufacturer

On Kenmore appliances, the first three digits of the model number are the key.

• 665 prefix: Whirlpool-built Kenmore dishwasher
• Other Kenmore prefixes can indicate other manufacturers (varies by product line)
• The full model number (like 66513163K701) is still important when ordering parts
• The user and installation documentation for this model family also aligns with Whirlpool-built Kenmore 665-series dishwashers

Why this matters for parts and repairs

Knowing Whirlpool built your Kenmore Elite 66513163K701 helps you match the correct replacement parts and troubleshooting steps, especially for common items like the drain pump, water inlet valve, and spray arm.

Common Whirlpool-built Kenmore 665 parts you may see

What it affects	Example part for this model	What it does
Draining	Dishwasher drain pump WPW10348269	Pumps water out at the end of wash and during drain steps
Filling	Dishwasher water inlet valve WPW10158389	Opens to let water into the dishwasher at the start of cycles
Washing	Dishwasher spray arm WPW10491331	Spins and sprays water to clean dishes

Where to confirm your exact model details

For model-specific identification, features, and service notes, use the documentation for 66513163K701.

• Check the model tag inside the door for the full model number
• Use the 66513163K701 owner's manual for operating details and feature descriptions
• Use the 66513163K701 installation guide for installation requirements and connection specs

Why it matters

The manufacturer affects part compatibility. Even small model-number differences can change which control board, sump, or hose fits, so matching 66513163K701 exactly prevents wrong-part returns.

Last updated: February 2026

A Kenmore Elite dishwasher typically lasts 10 years with normal home use. For model 66513163K701, good loading habits, regular filter cleaning, and fixing small leaks or drain issues early can help you reach (and sometimes exceed) that typical service life; see the 66513163K701 owner’s manual for care guidance.

Typical lifespan and what affects it

Most dishwashers wear out from a few common stress points: heat, hard water, food soil, and drainage problems.

• Water quality: Hard water speeds up mineral buildup on spray arms and in the sump.
• Maintenance: A clogged filter reduces wash performance and strains the pump.
• Loading habits: Overloading blocks spray and increases cycle time.
• Detergent use: Too much detergent can cause residue; too little can leave soil behind.
• Drain health: Slow draining can lead to odors and standing water.

Maintenance schedule we recommend

Use this simple routine to protect the motor, sump, and racks.

Task	How often	What it helps prevent
Clean the filter area	Weekly to monthly	Poor cleaning, odors, pump strain
Inspect/clear spray arm holes	Monthly	Weak spray, gritty residue
Run a dishwasher cleaner cycle	Monthly	Grease and mineral buildup
Check drain path and hose routing	Every 3 to 6 months	Slow drain, standing water

If you find standing water or repeated drain problems, the dishwasher drain pump WPW10348269 and dishwasher drain hose 8269144A are common wear items to inspect on this model.

Quick signs your dishwasher is nearing end of life

These symptoms usually point to a major component wearing out (pump, motor, control, or tub sealing surfaces).

• Cycles stop mid-cycle or the unit will not complete a wash
• Persistent leaking at the door or from underneath
• Loud grinding or buzzing during wash or drain
• Dishes stay dirty even after cleaning the filter and spray arms
• Repeated no-drain or fill problems

Why it matters

Knowing the typical 10-year lifespan helps you decide whether to repair or replace. If your 66513163K701 is close to that age, investing in maintenance and addressing drainage or wash issues early often prevents bigger failures later.

Last updated: February 2026

Yes. Kenmore Elite is Kenmore’s high-end line, and the Kenmore Elite dishwasher model 66513163K701 is built around premium fit-and-finish, quieter operation features, and longer warranty coverage compared with basic Kenmore models (including extended coverage for racks and stainless tub leak-through on applicable models). See the 66513163K701 owner's manual for the warranty and feature details specific to your unit.

What “high end” means for this dishwasher

High-end positioning usually shows up in a few practical areas:

• Warranty coverage: the manual lists a 3-year limited warranty, plus longer coverage on racks and (on stainless tub models) tub/inner door panel leak-through.
• Build and installation details: the installation guide calls out clearance requirements around the motor and flooring, and includes model-specific hardware notes.
• Serviceable design: common wear or failure items (drain pump, inlet valve, filter) are replaceable when performance drops.

Quick comparison: Kenmore vs Kenmore Elite (typical)

Category	Kenmore (standard)	Kenmore Elite (like 66513163K701)
Features	Core wash and dry cycles	More premium features and configurations
Warranty	Typically shorter	Typically longer and more detailed coverage
Noise and feel	Varies by model	Typically quieter, more refined
Repair approach	Replace common parts as needed	Same, but often with higher-end components

Why it matters when you’re shopping parts or troubleshooting

“Elite” matters most when you are matching parts and expectations to the exact model. For example, if your dishwasher is not draining or is leaving water behind, the fix often comes down to the drain path and drain components, not the “Elite” label.

Common parts customers replace on this model include:

• Dishwasher drain pump WPW10348269 (draining problems)
• Dishwasher water inlet valve WPW10158389 (filling problems)
• Filter W10872845 (poor cleaning, debris recirculation)

Tips to confirm you have an Elite-level configuration

Use these checks to align expectations with your exact build:

• Confirm the full model number on the rating label: 66513163K701.
• Review the warranty section in the 66513163K701 owner's manual.
• If you are installing or reinstalling, follow the installation guide for clearance, leveling, and hardware requirements.

Why it matters

Knowing whether you have a Kenmore Elite model helps you set the right expectations for features and warranty coverage, and it helps ensure you order the correct Kenmore dishwasher parts (especially racks, pumps, and seals) for 66513163K701.

Last updated: February 2026