Maytag MRT118FZEH00 refrigerator Parts

On a Maytag top-mount refrigerator like model MRT118FZEH00, the upper section is typically called the freezer compartment. It is designed to keep foods frozen and, on many models, it is also where the ice maker (if equipped) is located; see the MRT118FZEH00 owner's manual for your exact compartment features.

• Freezer shelves or a wire rack for frozen foods
• A freezer temperature control or an air control (depending on design)
• An ice tray or optional ice maker area (model dependent)
• An evaporator cover panel (cold air source behind it)
• A door bin for smaller frozen items

Knowing the correct compartment name helps when you are ordering parts, following troubleshooting steps, or describing a cooling problem. For example, if the freezer is cold but the refrigerator section is warm, we often focus on airflow components like the refrigerator evaporator fan motor WP2315539 and related air passages.

If temperatures are off, these checks solve many “warm fridge” or “warm freezer” issues:

• Confirm the controls are set correctly and not in a “warm” position
• Make sure vents are not blocked by food packages
• Check that doors close fully and gaskets seal
• Listen for the evaporator fan running when the compressor is on
• Clean dust from the condenser area to improve heat removal

Last updated: January 2026

Maytag refrigerator dimensions vary by model and style; for the Maytag MRT118FZEH00 top-mount refrigerator, the exact height, width, and depth are listed in the MRT118FZEH00 owner's manual. As a practical rule, most full-size Maytag refrigerators fall in the 62 to 72 inch height range, about 29 to 36 inches deep, and roughly 30 to 36 inches wide.

These ranges help with rough planning for delivery, cabinet openings, and door swing clearance:

• Height: 62 to 72 inches
• Width: 30, 33, or 36 inches are common
• Depth: 29 to 36 inches (deeper if you include handles)
• Clearance: plan extra space behind and above for airflow

We recommend measuring in three ways so you do not get surprised during installation:

• Measure width at the widest point (often the hinge side or doors)
• Measure height from floor to top (include hinge cover if it sits higher)
• Measure depth front-to-back (note two numbers: cabinet only, and with handles)
• Measure the doorway and path for delivery (tight turns matter)

Correct dimensions prevent installation problems like doors that cannot open fully, poor airflow that hurts cooling performance, and delivery issues getting the refrigerator through doorways.

Last updated: January 2026

A top-mount refrigerator like the Maytag MRT118FZEH00 puts the freezer on top and the fresh-food section below; this layout is popular because it’s simple to use, typically offers strong fresh-food storage, and is easy to maintain with straightforward airflow and door sealing. For model-specific features and care details, use the MRT118FZEH00 owner's manual.

• More usable fresh-food space: The refrigerator compartment is usually the larger section, which helps with everyday groceries.
• Easy access to frozen foods: The freezer is higher up, so many frozen items are closer to eye level.
• Straightforward organization: Shelves and bins tend to be simple and flexible for common food sizes.
• Often easier upkeep: Basic door gaskets, fans, and controls are typically accessible for service.
• Good value over time: Fewer complex features can mean fewer failure points for many households.

If cooling or temperature consistency starts to slip, these common components often relate to airflow and temperature sensing:

• Refrigerator evaporator fan motor WP2315539 (moves cold air through the compartments)
• Refrigerator thermistor WPW10383615 (helps the control sense temperature)
• Refrigerator door gasket (white) W10861499 (helps prevent warm air leaks)

Choosing a top-mount refrigerator is often about everyday convenience: you get a roomy fresh-food section for daily use, quick freezer access, and a design that’s typically straightforward to keep running efficiently.

Last updated: January 2026

The most common Maytag refrigerator problem is a cooling complaint: the fresh food section is not cold enough, temperatures swing, or the unit runs too long. On the Maytag MRT118FZEH00, the most frequent root causes are airflow restrictions (dirty condenser coils, blocked vents), door seal leaks, or a failing evaporator fan system; use the MRT118FZEH00 owner's manual to confirm normal settings and operating checks.

• Dirty condenser coils: reduced heat release can cause warm temps and long run times.
• Airflow blocked inside: packages against vents can starve the refrigerator section of cold air.
• Door not sealing: warm air leaks in, causing frost and poor cooling.
• Evaporator fan not moving air: you may hear unusual noise or notice weak airflow.
• Temperature sensing issues: a bad sensor can cause inconsistent cooling.

1. Set controls to a normal mid-range setting and allow 24 hours for temperatures to stabilize.
2. Clean condenser coils and confirm the unit has proper clearance for airflow.
3. Check door closing and gasket contact all the way around.
4. Listen for the evaporator fan running when the compressor is on.
5. If temperatures are erratic, test the temperature sensor circuit.

Cooling problems usually start small (longer run times, slightly warm food) but can lead to spoiled food, heavy frost, and higher energy use. Catching airflow and sealing issues early often prevents more expensive repairs like sealed-system work.

• How to fix your evaporator cooling fan
• How to fix a fridge door seal

Last updated: January 2026