Craftsman 917288420 tractor Parts

For the Craftsman 917288420 front-engine lawn tractor, the most common problems we see involve drive and deck belts slipping or breaking, PTO and clutch engagement issues, starting or no-crank complaints, and uneven cutting from worn deck components. Use the owner's manual for model-specific adjustments and maintenance intervals.

• Tractor will not move or loses drive: worn or stretched ground drive belt, idler pulley wear, linkage out of adjustment
• Blades will not engage: faulty PTO switch, electric clutch issue, damaged blade drive belt
• No crank or intermittent starting: weak battery connections, failed starter solenoid, safety switch or wiring issue
• Uneven cut or vibration: worn mandrel bearings, bent blade, loose hardware, deck out of level
• Steering feels loose: worn steering linkage components (drag link, steering plate)

These are frequent wear items for riding mowers and are available for Craftsman 917288420:

• Lawn tractor ground drive or blade drive belt, 1/2 x 92-2/5-in 592855201 (drive-related complaints)
• Lawn tractor blade drive belt, 5/8 x 139-3/8-in 593773401 (blade engagement and cutting)
• Switch.pto 582107601 (PTO engagement problems)
• Lawn tractor starter solenoid 582042802 (no-crank issues)
• Lawn tractor mandrel assembly 587820301 (noise, vibration, uneven cut)

1. Park on level ground, set parking brake, remove key, and disconnect the spark plug wire.
2. Inspect belts for glazing, cracking, fraying, or oil contamination.
3. Spin idler pulleys by hand; replace if noisy, wobbly, or rough.
4. Confirm PTO switch operation and check wiring connectors for looseness or corrosion.
5. Level the deck and verify blade hardware is tight.

Catching belt wear, loose hardware, and deck alignment early prevents bigger failures like damaged pulleys, overheated clutches, and premature mandrel bearing wear.

Last updated: March 2026

A Craftsman front-engine lawn tractor like model 917288420 typically lasts 10 to 15 years with normal residential use and routine maintenance. Lifespan depends most on mowing hours, storage conditions, and how consistently you service belts, blades, and the drive system.

• Annual operating hours: 25 to 50 hours per year lasts much longer than heavy weekly use.
• Maintenance schedule: oil changes, air filter service, blade sharpening, and deck cleaning.
• Belt and pulley wear: worn belts slip and overheat; bad idlers accelerate belt damage.
• Deck and spindle condition: impacts, vibration, and lack of lubrication shorten life.
• Storage: covered, dry storage prevents corrosion and electrical issues.

Use the service intervals and specs in the owner's manual and focus on these common wear items:

• Inspect and replace the blade drive belt when cracked, glazed, or stretched (example: lawn tractor blade drive belt, 5/8 x 139-3/8-in 593773401).
• Check the ground drive belt for slipping or loss of drive (example: lawn tractor ground drive or blade drive belt, 1/2 x 92-2/5-in 592855201).
• Keep the deck running smooth; replace noisy or loose spindle components (example: lawn tractor mandrel assembly 587820301 or lawn tractor mandrel housing 587819701).
• Verify the PTO engages cleanly; a weak clutch can cause poor cutting and belt wear (example: lawn tractor electric clutch 532414737).
• Address no-crank issues early; heat-damaged wiring and weak solenoids strain the starting circuit (example: lawn tractor starter solenoid 582042802).

Knowing the expected lifespan helps you decide whether to repair or refresh key systems (mower deck, drive, steering) so your 917288420 stays reliable and cuts evenly without repeated belt failures.

Last updated: March 2026

For Craftsman lawn tractor model 917288420, the operator’s manual specifies a 24.0 HP gas engine (horsepower rated by the engine manufacturer) and notes it is a low-emission engine design. The manual does not identify the engine brand or model number.

From the 917288420 operator's manual, we can confirm these model-specific details:

• Engine power rating: 24.0 HP (as rated by the engine manufacturer)
• Fuel type: unleaded regular gasoline (minimum 87 octane)
• Engine oil type guidance: SAE 30 above 32°F; SAE 5W-30 below 32°F
• Spark plug listed: Champion QC12YC (gap .040 in.)
• This tractor uses a low-emission engine that may operate differently than older designs

Even though the 917288420 manual doesn’t call out the engine manufacturer, you can usually confirm it quickly on the machine:

• Check the engine shroud/cover decal (often shows Briggs & Stratton, Kohler, etc.)
• Look for the engine model/type/code label near the valve cover, blower housing, or starter
• Record the full engine ID before ordering engine-specific parts (filters, carburetor parts, ignition parts)

The tractor model number (917288420) helps match chassis and deck parts, but the engine model number is what ensures you get the correct tune-up parts (spark plug, air filter, fuel filter) and engine repair components.

Last updated: January 2026