Craftsman + Power grinder parts > Craftsman power grinder parts + Angle grinder parts

Craftsman angle grinder repair and replacement parts

Sears PartsDirect is a leading parts supplier for Craftsman angle grinders. We have the Craftsman repair parts you need to fix any problem that you may encounter with your angle grinder. We also carry accessories and tools to help you get the most out of your Craftsman angle grinder.

Models (50)

Showing 1-20 of 50

Craftsman 900277420 grinder

59 parts

Craftsman FS2601B grinder angle

3 parts

Craftsman 315FS2601B grinder angle

3 parts

Craftsman 315FS3000B angle grinder

4 parts

Craftsman 900277230 angle grinder

48 parts

Craftsman 90011650TY1 grinder

7 parts

Craftsman 135115100 craftsman disc grinder sander

54 parts

Craftsman 900277240 5 angle grinder

48 parts

Craftsman 480266470 grinder

55 parts

Craftsman 172417760 grinder angle

56 parts

Craftsman 900276990 angle grinder

37 parts

Craftsman 172417750 grinder angle

58 parts

Craftsman 900115000 angle grinder

47 parts

Craftsman 135277030 craftsman disc grinder sander

55 parts

Craftsman 135277002 industrial 4 1 2 disc grinder sander

51 parts

Craftsman 875199890 grinder

38 parts

Craftsman 875185600 angle grinder

49 parts

Craftsman 900277040 7 angle grinder

52 parts

Craftsman 900277010 5 inch angle grinder

43 parts

Craftsman 900277422 grinder

50 parts

Showing 1-20 of 50

Brands

Craftsman

Parts and accessories that you'll need for your Craftsman angle grinder

Sanding disc. The sanding disc smooths rough surfaces and edges.
Grinding disc. Use the grinding disc to remove unwanted portions on a workpiece.
Cutting disc. The cutting disc chops off portions of a workpiece that are unneeded.
Auxiliary handle. The auxiliary handle can be installed on either side or the top of the angle grinder housing to help you control the grinder during grinding.
Backing disc. The backing disc fits under the sanding disc and supports the sanding disc.

How to install a sanding disc on your Craftsman angle grinder

Be sure that the angle grinder is unplugged and that it's cool to the touch.
Push the hub of the disc nut through the center of the sanding disc.
Position the backing disc behind the sanding disc and push the disc nut through the backing disc.
Push the assembled discs on the spindle and thread the disc nut onto the disc nut hub.
Tighten the disc nut completely down on the spindle.
Engage the locking pin to lock the spindle in place.