Craftsman 917272760 lawn tractor Parts

For Craftsman lawn tractor model 917272760, we identify the build year by reading the serial number on the product ID tag and decoding the date portion. On many Craftsman riders, the first six digits are MMDDYY (month, day, year), so a serial starting with 071294 indicates July 12, 1994. See the 917272760 owner's manual for tag location and identification details.

Where to find the serial/model tag on a riding mower

On most Craftsman front-engine lawn tractors, the ID tag is easy to spot once you know where to look.

• Check under the seat pan or on the seat support area
• Look on the rear fender area near the seat
• Check the frame rail near the engine compartment
• Wipe off grass and oil film so the digits are readable
• Write down both the model number and serial number before ordering parts

How to decode the date from the serial number

Many Craftsman riding mowers use a 6-digit date code at the start of the serial number.

Serial starts with	Meaning	Example result
MMDDYY	Month, day, year	071294 = July 12, 1994
Other format	Date may be embedded later in the serial	Use the manual’s ID section

Quick checks to avoid mix-ups

• Use the first six digits only if they look like a real date (01-12 for month, 01-31 for day)
• If the first six digits do not form a valid date, use the identification section in the manual
• Confirm you are reading the serial number, not a part number stamped on a bracket

Why it matters

The manufacturing year helps us match the correct parts and specifications for your mower deck, engine controls, and chassis. Even within the 917.272xxx family, small production changes can affect blades, mandrels, and hardware.

Last updated: February 2026

For the Craftsman lawn tractor model 917272760, a typical engine replacement (parts plus labor) runs about $260 to $1,800, with around 6 labor hours commonly billed for a riding mower engine swap. Exact cost depends on engine type, shop rates, and any extra repairs found during removal.

What drives the total price?

• Engine cost (new or remanufactured) is usually the biggest line item
• Labor rate varies by region and service center
• Extra parts often get replaced at the same time (belts, pulleys, wiring)
• Fuel system cleanup may be needed if old fuel caused starting issues
• Pickup and delivery fees can apply for riding mowers

Quick cost breakdown (typical ranges)

Cost item	Typical range	Notes
Replacement engine	$200 to $1,500	Varies by horsepower, shaft size, and brand compatibility
Labor (riding mower)	5 to 8 hours	Many shops land near 6 hours
Shop supplies and small hardware	$10 to $60	Clamps, fuel line, fasteners
Optional add-ons	$0 to $300+	Battery, belts, tune-up parts

Before you replace the engine, check these common “no start” causes

We see many tractors that need a battery, fuel, or safety switch fix instead of a full engine. Use the troubleshooting steps in the 917272760 owner's manual.

• Battery weak or cables corroded
• Safety interlock issue (seat switch, brake switch, PTO switch)
• Old fuel or water in fuel; clogged fuel filter
• Spark plug or ignition wire loose
• Dirty cooling fins or clogged muffler

Why it matters

An engine replacement is one of the highest-cost repairs on a riding mower. Confirming the real failure first helps you avoid paying for an engine when the issue is a belt, wiring, fuel delivery, or a safety circuit problem.

Last updated: February 2026

To look up the Craftsman model number for your riding mower, find the model/serial tag on the tractor frame under the seat or on the underside of the seat itself. For model 917272760, the 917272760 owner's manual also lists the model number on the cover page.

Where to find the model number tag

On most Craftsman front-engine lawn tractors, the ID tag is in one of these spots:

• On the frame directly under the seat (lift the seat to view)
• On the underside of the seat pan
• Near the rear fender area close to the seat mounting points
• Occasionally on the frame rail near the rear wheels

How to use the model number once you find it

Use the full model number exactly as printed (numbers and punctuation) to match parts and diagrams.

• Enter the model number to pull up the correct parts list and exploded views
• Use the parts diagrams to confirm fit before ordering (deck, steering, wheels, engine)
• Match common wear items by description and part ID when available

Example parts you can match by model

What you are replacing	Example part for model 917272760	What it affects
Ignition key	Molded ignition key 532140403	Starting and key fit
Front tire	Tire 532122073	Traction and ride quality
Front axle cap	Lawn tractor axle cap 532104757	Wheel retention and dust protection

Why it matters

Craftsman tractors often look similar across years, but small changes in deck size, wheel hardware, and engine configuration can change the correct part. Using the exact model number helps us match the right blade, tire, rim, or mandrel assembly the first time.

Last updated: February 2026

A “42-inch” riding lawn mower refers to the cutting deck width, not the overall machine width. For the Craftsman lawn tractor model 917272760, the mower deck is a 42-inch deck; the tractor’s total width is typically a few inches wider than the deck because of the tires and chute.

What “42-inch” actually means

A 42-inch deck means the blades cut a swath about 42 inches wide in one pass. On model 917272760, the manual identifies the mower deck assembly as a 42-inch deck.

Typical overall width you can expect

Overall width varies by tire size, wheel spacing, and whether the discharge chute is installed.

• Deck width (cutting width): 42 in
• Tractor width without chute (typical): about 44 to 48 in
• Tractor width with side discharge chute (typical): about 48 to 54 in
• Best way to confirm: measure outside-to-outside at the widest point (usually chute or rear tires)

How to measure your mower’s width (quick and accurate)

1. Park on a flat surface, set the parking brake, and shut the engine off.
2. Set the deck to a mid cutting height so the chute sits in its normal position.
3. Measure the widest point:
   • Outside edge of left tire to outside edge of right tire
   • Then measure again including the discharge chute (if installed)

Deck width vs. overall width (at-a-glance)

Measurement	What it tells you	Why you care
42 in deck	Cutting path per pass	Mowing time and blade/deck parts fit
Overall width	Space the tractor needs	Gate clearance, trailer/ramp fit, shed storage

Why it matters

Knowing the difference prevents fit issues when you are planning storage, hauling, or mowing through gates. It also helps you buy the correct deck parts for a 42-inch setup, such as the husqvarna lawn tractor mulching blade, 21-in 532134149 used on this model’s 42-inch deck configuration.

For deck identification and diagrams tied to model 917272760, use the 917272760 owner's manual.

Last updated: February 2026

The Craftsman riding mower model 917.272760 uses a low-emission gasoline engine (per the manual) and is paired with an electric start system and a 42-inch mower deck. For the exact engine make, model, and service specs, use the 917272760 owner's manual.

How to identify the exact engine on your 917272760

Use these quick checks to match the correct engine parts and tune-up items:

• Look for the engine ID label on the blower housing, valve cover, or near the starter
• Record the engine model, type, and code (often three separate fields)
• Match the engine ID to the correct air filter, spark plug, and oil recommendations
• Confirm whether your tractor has any emissions label or CARB/EPA tag (helps with exact identification)
• Use the tractor model number 917272760 when ordering chassis or deck parts

What the manual confirms about the powertrain

The manual for model 917272760 describes the tractor as an electric-start unit with a low-emission engine that may operate differently than older designs. It also emphasizes operating at full throttle for best mowing performance and battery charging.

Quick reference (what we can confirm)

Item	What applies to 917272760	Where to verify details
Engine type	Gas, low-emission	Engine ID label, manual specs section
Starting system	Electric start	Manual operation section
Deck size	42-inch mower deck	Manual cover/specs

Why it matters

The exact engine make and model determines the correct maintenance parts (spark plug, air filter, fuel filter) and the right procedures for tune-ups and troubleshooting. Using the engine ID prevents ordering the wrong parts.

Last updated: February 2026