Owner’s manual
Error Codes
How big is a Kenmore refrigerator model 10641173710?
Kenmore side-by-side refrigerator model 10641173710 is designed to fit a standard side-by-side opening; the exact exterior height, width, depth (with and without handles), and total capacity are listed in the 10641173710 owner's manual. The manual also gives the installation clearances you must maintain.
Your 10641173710 uses the Kenmore 106.4113*/106.4117* side-by-side platform shown in the manual cover; that is why the same Use & Care Guide applies.
Installation clearance guidance from the manual:
- Allow 1/2 inch (1.27 cm) on each side and at the top for ventilation
- Allow 2 inches (5.08 cm) behind the refrigerator for airflow
- If you have an ice maker or water dispenser, leave extra space behind for the water line
- If installing next to a fixed wall, leave about 2 inches (5.08 cm) on the hinge side (varies by setup) so doors can swing open
Measure both the refrigerator and the space, then compare to the spec section in the manual.
- Width: cabinet width at the narrowest point
- Height: floor to the top of the cabinet (include hinge cover area if present)
- Depth: cabinet depth, then depth with handles
- Door swing: clearance needed to fully open doors and remove bins
- Delivery path: doorways, hall turns, and flooring transitions
| Measurement | What to record | Why it matters |
|---|---|---|
| Width | opening and refrigerator width | prevents binding and rubbing |
| Height | opening height and unit height | avoids hinge and cabinet interference |
| Depth | without handles and with handles | ensures doors clear walkways |
| Clearances | side, top, rear, hinge-side | protects airflow and door swing |
Correct sizing is not only about fitting the opening; proper clearance keeps airflow moving across the condenser and evaporator system, helps temperatures stay stable, and prevents doors from hitting walls or failing to open far enough for bin access.
Last updated: January 2026
Where is the model number on a Kenmore side by side refrigerator?
On Kenmore side-by-side refrigerator model 10641173710, the model number is printed on the model and serial number label attached to the refrigerator cabinet. Use the label to record the full model number and serial number before ordering parts or scheduling service; see the 10641173710 owner's manual.
Check these common label locations on side-by-side refrigerators:
- Inside the fresh food (refrigerator) compartment on a side wall
- Along the ceiling of the fresh food compartment near the light
- On the frame just behind the refrigerator door gasket area
- Inside the freezer compartment on a side wall (less common)
- Behind the base grille or near the lower front frame (occasionally)
- Open the refrigerator door and scan the cabinet walls and ceiling for a white or silver sticker/plate.
- Look for headings like Model, Model No., MOD, Serial, or S/N.
- Write down the model number exactly as shown (for this unit, it will match 10641173710 or the 106.4113*/106.4117* family shown in the manual).
Having the full label info prevents ordering the wrong door gasket, shelf, or fan parts.
| Label item | What it’s used for | Example of when it matters |
|---|---|---|
| Model number | Confirms the exact parts list | Door bin and shelf fitment |
| Serial number | Helps identify production variation | Wiring and control revisions |
| Purchase date (if known) | Service and maintenance records | Filter replacement planning |
Kenmore model numbers can look similar across different refrigerator builds. Using the exact model and serial label information helps us match the correct parts diagrams and avoid returns due to fit issues.
Last updated: January 2026
What is the average lifespan of 10641173710?
The average lifespan of the Kenmore 10641173710 side-by-side refrigerator is 13 years. Regular condenser cleaning, good door sealing, and keeping the evaporator fan and defrost system working correctly are the biggest factors in reaching that service life.
- Condenser airflow: Dust-clogged coils make the compressor run hotter and longer.
- Door seal condition: Leaky gaskets cause longer run times and moisture problems.
- Defrost performance: A weak heater or heavy frost can reduce cooling and strain the system.
- Fan operation: Poor airflow from the evaporator fan leads to warm temps and icing.
- Temperature settings: Keeping the freezer near 0°F and fresh food near 37°F reduces stress.
- Vacuum the condenser area and keep vents clear.
- Confirm doors close fully and don’t pop open.
- Clean and dry gasket folds; remove sticky residue.
- Listen for steady evaporator fan operation when the door switch is pressed.
- Replace the water filter on schedule (the manual notes every 6 months).
| Category | Examples on this model | Why it matters |
|---|---|---|
| Wear and sealing | Door gaskets | Prevents warm air leaks and frost |
| Air movement | Evaporator fan motor/blade | Maintains even cooling |
| Defrost | Defrost heater | Prevents ice buildup on the evaporator |
| Major system | Compressor | Drives the sealed cooling system |
If you’re troubleshooting cooling or door-seal issues, these model-matched parts are often involved:
- Door gasket (black) 2159083
- Refrigerator defrost heater WP2323198
- Refrigerator evaporator fan motor WP2315549
- Refrigerator compressor W10309988
A refrigerator that runs longer to hold temperature uses more energy and wears out key components faster. Simple airflow and sealing maintenance helps the Kenmore 10641173710 reach its full expected lifespan.
For model-specific care steps and filter replacement intervals, use the owner's manual.
Last updated: March 2026
