Kenmore Elite 11047791700 washer Parts

Yes. Kenmore Elite is Kenmore’s premium line, and the Kenmore Elite washer model 11047791700 is built with higher-end features and durability upgrades compared with standard Kenmore models (for example, a stainless steel drum and a long limited tub warranty). See the 11047791700 owner's manual for the feature set and care guidance specific to your washer.

On this model, “Elite” typically shows up as better materials, more cycle options, and design choices aimed at performance and longevity.

• Stainless steel wash drum (premium material and long-life design)
• Multiple specialty cycles (for example, Heavy Duty, Bulky/Bedding, KidsWear)
• Built-in water heating support for certain cycles (helps maintain target wash temperatures)
• Higher spin performance on select cycles (helps reduce drying time)
• More advanced care and maintenance guidance in the manual (helps keep performance consistent)

The warranty language in the manual is one of the clearest indicators that this washer is positioned above entry-level models.

Higher-end front-load designs often rely on tight sealing, stable suspension, and precise controls. When any of those wear, performance drops quickly.

Common “premium washer” parts that affect performance include:

• Door seal and leak prevention: washer door boot WP8182119
• Door closing and alignment: washer door hinge WP8183202
• Door locking and cycle start: washer door lock WP8183270
• Vibration control: washer shock absorber W10822553

If you’re comparing repair vs. replace, we recommend checking the parts list for your model first, then using Sears PartsDirect to search by model number if you need additional options.

Last updated: February 2026

Yes; repairing a Kenmore Elite washer like model 11047791700 is worth it when the fix restores safe, reliable operation for less than replacing the washer. Common repairs (door seal leaks, door lock issues, excessive vibration) are straightforward and can extend the washer’s usable life.

Use these practical checkpoints before you spend money:

• Age and condition: If the tub, drum, and cabinet are solid (no severe rust, cracks, or chronic leaks), repair is usually the better value.
• Symptom type: Leaks, door problems, and vibration are typically repairable with standard parts.
• Cost vs. replacement: If parts plus labor stay well below the cost of a comparable new front-load washer, repair wins.
• Safety and usability: If the door will not lock, the washer will not drain, or it “walks,” fix it before continued use.
• Maintenance history: A washer that has been cleaned and not overloaded tends to respond well to repairs.

For model-specific operating and care guidance, use the 11047791700 owner's manual.

These are frequent, high-impact fixes that stop leaks and restore normal operation:

• Door seal leak or moldy seal: replace the washer door boot WP8182119
• Door will not latch or unlocks mid-cycle: replace the washer door lock WP8183270
• Door sagging or misalignment: replace the washer door hinge WP8183202
• Excessive shaking or banging: inspect/replace the washer shock absorber W10822553

A small failure (like a worn door boot) can turn into bigger damage if water reaches wiring, bearings, or the motor control area. Fixing the root cause early protects major components and keeps cycles efficient.

We list model-matched replacement parts for 11047791700 on this page; you can also search by model number on Sears PartsDirect if you are comparing options or building a full repair list.

Last updated: February 2026

To force your Kenmore Elite washer model 11047791700 to drain, we use the built-in Drain & Spin cycle: cancel the current cycle, power the washer back on, select DRAIN & SPIN, then press and hold START for about 1 second. See the steps in the 11047791700 owner's manual.

• Press STOP twice to cancel the current cycle.
• Press POWER.
• Select DRAIN & SPIN.
• Press and hold START (about 1 second) to begin draining.
• When the spin finishes, the door unlocks and you can remove items.

These checks fix the most common drain problems on front-load washers.

• Make sure the drain hose is not kinked or crushed behind the washer.
• Confirm the standpipe or laundry tub drain is not clogged.
• Do not force extra drain hose down into the standpipe; the hose should be secure but loose enough to leave an air gap.
• If you suspect a restriction between the tub and pump, inspect the washer tub-to-pump hose WPW10467168 for blockage or damage.
• If the washer drains slowly or intermittently, the drain pump itself can be the issue; the parts list for this model includes the pump 280187.

A proper drain clears water so the door can unlock and the washer can safely spin. Correct drain hose setup also prevents siphoning (drain water flowing back into the washer), which can cause repeat drain problems.

You can order replacement parts for Kenmore Elite 11047791700 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For your Kenmore Elite washer 11047791700, regular preventive care (cleaning, correct loading, and keeping the washer level) is what most consistently extends service life; see the maintenance schedule in the 11047791700 owner's manual.

Most washer life comes down to how hard it works and how well it is maintained.

• Loads per week: more cycles equals faster wear on bearings, shocks, and the drain system
• Overloading: increases vibration and stress on the suspension and tub
• Detergent use: too much detergent can contribute to residue and odor issues
• Water quality: sediment can affect fill performance and valves
• Installation: an unlevel washer is more likely to walk, bang, and wear parts early

These symptoms often show up as a washer approaches the end of its typical lifespan:

• Loud rumbling or grinding during spin
• Repeated out-of-balance shaking or walking
• Water leaks at the door area
• Intermittent draining problems
• Door not locking reliably

Knowing the typical 10 to 15 year lifespan helps you decide when a repair is worth doing. Many issues that feel “major” (leaks, vibration, door lock problems) are often caused by a single wearable part, and replacing that part can restore normal performance.

Use these habits to keep your Kenmore Elite 11047791700 running longer:

• Keep the washer level and stable on the floor
• Avoid packing the drum tight; leave room for tumbling
• Run periodic cleaning cycles and wipe the door area dry after use
• Check water inlet hoses periodically for wear (per the manual’s care section)
• Address small leaks quickly to prevent corrosion and bearing damage

If you need parts, you can order replacements from the parts list for model 11047791700 on this page, or search by model number on Sears PartsDirect.

Last updated: February 2026

Your Kenmore Elite washer model 11047791700 is a front-load design; these machines are typically 3.5 to 4.5 cu. ft. capacity. For the exact capacity for your specific unit, use the model’s documentation and the rating label on the washer; start with the 11047791700 manual.

Use these reliable places to confirm the number for model 11047791700:

• Check the model and serial tag (commonly inside the door opening or on the cabinet edge)
• Look in the Specifications section of the 11047791700 manual
• If your washer has a tech sheet stored inside the cabinet (often behind the lower front panel), check the spec line for capacity

Once you confirm the exact cu. ft., use this to size loads correctly.

• 3.5 to 3.9 cu. ft.: standard front-load capacity
• 4.0 to 4.5 cu. ft.: large front-load capacity
• 4.6 cu. ft. and up: extra-large front-load capacity

Capacity affects cleaning and rinsing because clothes need room to tumble. Overloading increases vibration, longer spin times, and wear on suspension components.

These steps help immediately and point to common wear items:

• Level the washer and make sure all feet are firmly on the floor
• Load for balance (mix sizes, avoid single heavy items)
• If the tub movement is excessive, inspect suspension parts and replace worn components such as the washer shock absorber W10822553

You can order replacement parts for model 11047791700 from the parts list for this washer, or search by model number on Sears PartsDirect.

Last updated: February 2026