Owner’s manual
Do Craftsman mowers use Briggs and Stratton engines?
Some Craftsman mowers use Briggs and Stratton engines, but not all. For the Craftsman lawn tractor model 917271110, the engine family varies by production configuration, so the most reliable way to confirm what your tractor has is to match the engine identification on the unit to the specs in the 917271110 owner's manual.
Use the tractor itself to verify the engine brand and model; that is what parts and tune-up specs are based on.
- Lift the hood and look for an engine label on the blower housing or valve cover.
- Write down the engine model, type, and code (common on Briggs engines).
- Compare those numbers to the engine section in the 917271110 owner's manual.
- If the label is missing, check for a stamped ID near the starter or muffler area.
- Use the engine ID (not just the tractor model) when ordering ignition, carburetor, and gasket parts.
The 917271110 manual lists tractor-level operating and maintenance specs that apply regardless of engine brand, such as fuel type, oil viscosity by temperature, and tire pressure.
| Item | Spec for 917271110 |
|---|---|
| Fuel | Unleaded regular; 1.25 gallon capacity |
| Oil type | SAE 30 above 32°F; SAE 10W-30 below 32°F |
| Tire pressure | Front 14 PSI; rear 10 PSI |
| Blade bolt torque | 27 to 35 ft-lbs |
Engine brand and model determine the correct tune-up parts (spark plug, air filter, fuel filter) and service procedures. Using the tractor model alone can lead to the wrong engine parts, even when the deck and drive parts are correct.
Last updated: January 2026
How much does it cost to replace a riding lawn mower engine?
For the Craftsman 917271110 riding lawn tractor, engine replacement typically runs about $800 to $2,500 total (engine plus labor), depending on the exact engine, shop rates, and any extra parts needed. Plan on around 4 to 8 labor hours for a typical riding mower engine swap; confirm specs and procedures in the 917271110 owner's manual.
Engine replacement cost is mostly the engine price, then labor, plus small parts and fluids that are smart to replace while everything is apart.
- Engine type and availability (new OEM-style vs. aftermarket vs. used)
- Labor rate (common shop rates vary widely by region)
- Extra parts discovered during removal (belts, pulleys, wiring, mounts)
- Tune-up items (spark plug, air filter, fuel filter, oil)
- Deck and drive condition (a worn belt or seized pulley can add time)
| Cost item | Typical range | Notes |
|---|---|---|
| Replacement engine | $500 to $1,900 | Biggest variable; depends on exact spec and source |
| Labor | $300 to $900 | Often 4 to 8 hours total |
| Fluids and tune-up parts | $30 to $150 | Oil, filter(s), plug, clamps, fuel line |
| “While you’re in there” parts | $0 to $300 | Belts, pulleys, hardware if worn |
If the tractor had vibration, belt slip, or poor cutting before the engine failed, we often see these items addressed during the job:
- Blade drive belt (deck belt) such as lawn tractor drive belt 532144200
- Ground drive belt such as v-belt 532138255
- Idler pulley such as lawn tractor blade idler pulley 532139245
- Muffler if rusted or leaking such as exhaust muffler 532159420
- Blade/mandrel components if the deck had noise or wobble
A riding mower engine swap is a major repair, so it only makes sense if the rest of the Craftsman 917271110 is in good shape (deck, transmission, steering, and frame). The manual also emphasizes safe service practices, including never making adjustments with the engine running and using extra caution around sharp mower blades.
Last updated: January 2026
What engine does Craftsman riding mower use?
The Craftsman riding mower model 917.271110 is a 16.5 HP electric-start front-engine lawn tractor. For the exact engine manufacturer, model family, and tune-up specs used on your unit, match the engine ID label on the engine to the details in the 917271110 owner's manual.
Use these quick checks to confirm the engine make and model on your tractor:
- Look for the engine ID label on the blower housing, valve cover, or near the starter
- Record the engine model, type, and code (or spec number)
- Compare those numbers to the engine information and maintenance section in the 917271110 owner's manual
- If the label is missing, use the tractor’s model number 917271110 plus the engine’s physical features (air filter style, muffler shape, carb layout)
- Use the engine ID to buy the correct spark plug, air filter, oil filter, and fuel filter
The owner’s manual for model 917271110 identifies this tractor as:
| Item | What to expect on 917271110 |
|---|---|
| Engine output | 16.5 HP |
| Starting system | Electric start |
| Deck size | 42-inch mower deck |
| Drive type | 6-speed transaxle |
Craftsman tractors in this series were built with different engine suppliers over time. Using the engine ID label prevents ordering the wrong ignition parts or filters and helps you follow the correct oil capacity and maintenance schedule.
When you service the mower deck, use the blade bolt torque spec from the manual (27 to 35 ft-lbs) and replace worn cutting parts as needed. If you are refreshing the deck for mulching, the husqvarna lawn tractor mulching blade, 21-in 532134149 is one of the blades listed for this model’s parts catalog.
Last updated: January 2026
