Free standard ground shipping within the 48 contiguous states with any water filter subscription. Find my filter

Open Hamburger Menu
Sears Parts Direct
Tips to find your model number

Husqvarna ST227P-96193009703 gas snowthrower Parts

Here are the diagrams and repair parts for Husqvarna ST227P-96193009703 gas snowthrower, as well as links to manuals and error code tables, if available.

Husqvarna ST227P-96193009703 gas snowthrower
By Schematic
By Part
SELECT DIAGRAM
?

This is the number corresponding to the part on the diagram / schematic

Browse Parts forST227P-96193009703 Snowblowers

  • Husqvarna Snowblower Friction Drive Ring for Husqvarna ST227P-96193009703 - Part 597362801

    Friction disc/gears diagram

    Ring

    Part #581091101

    Replaced by #597362801

    Info Icon
    Manufacturer substitution
    This part replaces 581091101. Substitute parts can look different from the original.
    In Stock
    $40.23
    Minus Item
    Qty
    Plus Item
  • Husqvarna Snowblower Engine Wire Harness for Husqvarna ST227P-96193009703 - Part 532429284

    Engine, lct 585335703 diagram

    Husqvarna Snowblower Engine Wire Harness

    Part #532429262

    Replaced by #532429284

    Info Icon
    Manufacturer substitution
    This part replaces 532429262. Substitute parts can look different from the original.
    In Stock
    $61.67
    Minus Item
    Qty
    Plus Item
  • Husqvarna Snowblower Drive Idler Arm for Husqvarna ST227P-96193009703 - Part 593192502

    Pulleys/belt diagram

    Idler Arm

    Part #581338203

    Replaced by #593192502

    Info Icon
    Manufacturer substitution
    This part replaces 581338203. Substitute parts can look different from the original.
    In Stock
    $35.70
    Minus Item
    Qty
    Plus Item
  • Lawn & Garden Equipment Lock Washer for Husqvarna ST227P-96193009703 - Part 596238801

    Pulleys/belt diagram

    Lawn & Garden Equipment Lock Washer

    Part #810040500

    Replaced by #596238801

    Info Icon
    Manufacturer substitution
    This part replaces 810040500. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $25.73
    19% OFF Phone Price : $31.73Info Icon
    Minus Item
    Qty
    Plus Item
  • Bearing Hous for Husqvarna ST227P-96193009703 - Part 597412801

    Friction disc/gears diagram

    Bearing

    Part #532175344

    Replaced by #597412801

    Info Icon
    Manufacturer substitution
    This part replaces 532175344. Substitute parts can look different from the original.
    In Stock
    $40.48
    13% OFF Phone Price : $46.48Info Icon
    Minus Item
    Qty
    Plus Item
  • Husqvarna Lawn Tractor Flange Nut, 1/2-13-in for Husqvarna ST227P-96193009703 - Part 521991102

    Friction disc/gears diagram

    Lawn Tractor Flange Nut, 1/2-13-in

    Part #521991101

    Replaced by #521991102

    Info Icon
    Manufacturer substitution
    This part replaces 521991101. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $7.40
    Minus Item
    Qty
    Plus Item
  • Lawn Tractor Bolt for Husqvarna ST227P-96193009703 - Part 596039401

    Auger housing diagram

    Lawn Tractor Bolt

    Part #872110505

    Replaced by #596039401

    Info Icon
    Manufacturer substitution
    This part replaces 872110505. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $31.04
    16% OFF Phone Price : $37.04Info Icon
    Minus Item
    Qty
    Plus Item
  • Snowblower Hex Screw for Husqvarna ST227P-96193009703 - Part 596322101

    Ball bearing diagram

    Screw.hex.hd

    Part #874780426

    Replaced by #596322101

    Info Icon
    Manufacturer substitution
    This part replaces 874780426. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $6.09
    14% OFF Phone Price : $7.09Info Icon
    Minus Item
    Qty
    Plus Item
  • Snowblower Interlock Cable for Husqvarna ST227P-96193009703 - Part 593853401

    Interlock cable diagram

    Cable Interlock

    Part #587332502

    Replaced by #593853401

    Info Icon
    Manufacturer substitution
    This part replaces 587332502. Substitute parts can look different from the original.
    This item is not returnable
    In Stock
    $61.67
    Minus Item
    Qty
    Plus Item
  • Husqvarna Snowblower Heated Handle Grip for Husqvarna ST227P-96193009703 - Part 590493601

    Handle grip diagram

    Handle Grip

    Part #588775901

    Replaced by #590493601

    Info Icon
    Manufacturer substitution
    This part replaces 588775901. Substitute parts can look different from the original.
    In Stock
    $51.57
    Minus Item
    Qty
    Plus Item

Husqvarna Gas Snowthrower ST227P-96193009703 FAQs

Yes. The Husqvarna ST227P-96193009703 is designed to be easy to start because it includes both a 120V electric starter (push-button) for cold starts and a recoil (pull) starter as a backup; the starting steps are clearly laid out in the st 227 p operator’s manual.

What makes starting easier on this model

The manual calls out features and steps that reduce “no-start” frustration, especially in cold weather.

  • Electric start uses standard 120V AC household current (3-wire grounded)
  • Recoil start is available if you cannot use an outlet
  • Clear cold-start sequence: key, throttle, switch, choke, primer, then start
  • Primer guidance helps prevent flooding (over-priming can stop the engine from starting)
  • Warm-up note helps set expectations (full power comes after warming up)

Quick start checklist (cold start)

Use this as a fast reference; follow the detailed procedure in the manual for your exact conditions.

  • Fuel shut-off valve set to OPEN
  • Insert the safety ignition key until it clicks
  • Throttle set to FAST
  • ON/OFF switch set to ON
  • Choke set to FULL, then prime 3 times
  • If using electric start: use an outdoor-rated extension cord (50 ft max) and press the starter button

Electric start vs recoil start

Starting method Best for What you need Common mistake to avoid
120V electric start Cold starts, quick starts Grounded 120V outlet, outdoor extension cord Cranking longer than 5 seconds per attempt
Recoil start No outlet available Pull cord and proper choke/prime settings Over-priming and flooding the engine

Why it matters

An “easy start” snowblower saves time and reduces wear on the starter system. Following the correct choke and primer steps also helps prevent fuel flooding, which is one of the most common reasons a gas snowthrower will not start.

Last updated: January 2026

The Husqvarna ST227P-96193009703 gas snowthrower uses fresh, clean regular unleaded gasoline (minimum 87 octane), and it allows up to 10% ethanol (E10). Do not use fuel with more than 10% ethanol; it can damage the fuel system and is not recommended for this model. See the ST227P-96193009703 owner's manual for the exact fuel guidance and safety steps.

Fuel type and what to avoid

Use these guidelines to prevent hard starting, poor performance, and fuel system damage:

  • Use unleaded regular gasoline, 87 octane or higher.
  • Use gasoline with up to 10% ethanol (E10).
  • Avoid E15, E20, E85, or any fuel labeled flex fuel.
  • Do not mix oil with gasoline (this is a 4-cycle engine setup).
  • Buy fuel you can use within 30 days to keep it fresh.

How much gas it holds

The operator manual lists the fuel capacity for this model.

Spec Value
Gasoline capacity 0.35 gallons (1.33 liters)
Recommended fuel Unleaded regular
Minimum octane 87

Storage and stale-fuel prevention

If the snowblower will sit for 30 days or longer, fuel care matters as much as the fuel type.

  • Run the engine until the fuel lines and carburetor are empty before long storage.
  • A fuel stabilizer is an acceptable alternative to help reduce gum deposits.
  • If you add stabilizer, run the engine about 10 minutes so treated fuel reaches the carburetor.
  • Never put engine or carburetor cleaner into the fuel tank.

Why it matters

Using the right gasoline (fresh 87-octane unleaded, E10 or less) helps your ST227P-96193009703 start easier, run smoother under load, and reduces carburetor and fuel-hose problems caused by moisture and fuel breakdown.

Last updated: January 2026

A gas snowblower like the Husqvarna ST227P-96193009703 typically lasts 15 to 20 years with normal residential use and consistent maintenance. Lifespan is driven less by age and more by how well the engine, belts, and moving pivot points are maintained and stored each off-season (see the ST227P-96193009703 owner's manual).

What most affects snowblower lifespan

We see the longest-lasting machines when owners stay on top of routine service and storage.

  • Oil checks and oil changes: check oil before use; change oil about every 25 operating hours or at least yearly
  • Belt condition: inspect for wear regularly; replace if slipping or worn
  • Lubrication: grease pivot points and interlock areas on schedule
  • Fasteners and controls: tighten loose hardware; confirm controls operate correctly before each use
  • Cleaning and storage: keep the housing clean and store dry; avoid spraying water into engine/electrical areas

Typical lifespan by type (quick comparison)

Snowblower type Typical lifespan What usually ends it first
Gas, mid to heavy-duty (like ST227P-96193009703) 15 to 20 years Belts, friction/drive wear, carburetor fuel issues
Gas, light-duty 10 to 15 years Drive system wear, corrosion, neglected maintenance
Electric (corded/battery) 8 to 12 years Motor/electronics, battery aging (battery models)

Maintenance habits that add years

These are the highest-impact habits we recommend for a Husqvarna gas snowthrower.

  • Replace the spark plug at the beginning of each season (or about every 100 hours)
  • Check belts for deterioration about every 50 hours; replace if worn (example: snowblower drive belt, 38.2-in 584216102)
  • Keep tires inflated to the typical range listed in the manual (often around 14 to 17 PSI)
  • Lubricate key points at the start of the season or about every 25 hours
  • Prepare for off-season storage if it will sit 30 days or more (clean, inspect belts, lubricate)

Why it matters

A snowblower that is maintained on schedule starts easier, throws snow more consistently, and avoids expensive failures like premature belt wear or engine damage from low oil. Good storage practices also prevent fuel and corrosion problems that shorten service life.

Last updated: January 2026

Most common symptoms to help you fix your snowblowers

Choose a symptom to see related snowblower repairs.

Main causes: clogged chute, damaged auger blades, broken shear pins, worn auger belt, damaged gear case, engine problems...

Things to do: replace the spark plug, change the oil, rebuild the carburetor, adjust valve lash, adjust or replace the b...

Main causes: dirty carburetor, stale fuel...

Main causes: clogged chute, snow build-up in auger housing, broken auger shear pins, auger drive belt needs adjustment, ...

Main causes: broken shear pins, worn or loose auger drive belt, auger drive cable failure, damaged auger, bad gear case...

Main causes: snow build-up in chute, chute drive mechanism failure, bad chute control assembly...

Main causes: loose drive clutch cable, damaged drive clutch cable, worn friction disc, scraper blade scraping the ground...

Main causes: dirty carburetor, clogged fuel filter, dirty spark plug, incorrect valve lash, leaky engine gaskets...

Repair guides for gas snowblowers

These step-by-step repair guides will help you safely fix what’s broken on your snowblower.

How to adjust snowblower skid shoes

How to adjust snowblower skid shoes

To prevent snowblower auger and shave plate damage, adjust the skid shoes regularly to keep the shave plate ¼-inch high....

Repair time and Difficulty

 15 minutes or less
How to rebuild a snowblower carburetor

How to rebuild a snowblower carburetor

Rebuild the carburetor on your snowblower if the engine isn't getting fuel....

Repair time and Difficulty

 45 minutes or less
How to replace a snowblower 4-way chute control assembly

How to replace a snowblower 4-way chute control assembly

Replace the 4-way chute control assembly on your snowblower if it’s damaged....

Repair time and Difficulty

 30 minutes or less

Effective articles & videos to help repair your snowblowers

Use the advice and tips in these articles and videos to get the most out of your snowblower.

Snowblower won’t start: 4 easy DIY fixes

Snowblower won’t start: 4 easy DIY fixes

Find easy DIY tips to fix your snowblower when it won't start...

Introducing new technical repair content that we’re developing for the Sears Technical Institute

Introducing new technical repair content that we’re developing for the Sears Technical Institute

Learn about Sears Technical Institute and the advanced technical content being developed for aspiring appliance techs....

Top questions about Sears and Sears PartsDirect

Top questions about Sears and Sears PartsDirect

Get answers to frequently asked questions about Sears and Sears PartsDirect....

Parts & More

Boating
Bottom-Mount Refrigerator
Chest Freezer
Cooktop
Dishwasher
Elliptical Machine
Painting Power Tool
Parts
Pressure Washer
Riding Mowers & Tractors
Treadmill
Washer