Kenmore 79570333411 refrigerator Parts

Yes. Multiple major brands make 33-inch wide refrigerators, including bottom-freezer and French door styles; they are a common “in-between” size when 30 inches is too small and 36 inches will not fit. For fit planning around your Kenmore model 79570333411, use the clearance guidance in the 79570333411 owner's manual.

What “33-inch wide” usually means

Manufacturers typically list width as the cabinet width (not including door handles). For a tight kitchen opening, we plan for a little extra space so doors can swing and air can circulate.

• Measure the opening at the top, middle, and bottom
• Check for baseboards, trim, and nearby walls that can block door swing
• Confirm depth needs (standard-depth vs counter-depth)
• Plan for ventilation space behind the unit
• Plan for front clearance so doors and drawers open fully

Fit and clearance tips (based on this Kenmore manual)

Your Kenmore 79570333411 manual calls out clearances that help prevent poor cooling and higher energy use.

Clearance area	Practical target	Why it helps
In front (door swing)	24 in.	Doors and freezer drawer open without binding
Behind (to wall)	2 in.	Airflow and heat rejection
Water pressure (if filtered)	40 to 120 psi	Supports dispenser and ice maker performance

Why it matters

A refrigerator that is “33 inches wide” can still fail to fit if the handles, hinges, or door swing hit cabinets, or if there is not enough airflow space. Planning clearances up front helps avoid warm temperatures, frost issues, and noisy compressor run time.

Last updated: January 2026

A bottom-mount refrigerator (like Kenmore model 79570333411) keeps the fresh-food section on top at eye level and puts the freezer drawer/compartment on the bottom. This layout makes everyday refrigerated items easier to reach while frozen foods stay below.

How a bottom-mount layout is set up

In a bottom-mount design, the refrigerator section is the primary upper compartment and the freezer is below.

• Fresh foods are stored higher, so you bend less for daily items
• Frozen foods are stored in a lower drawer or lower compartment
• Cold air circulation still relies on airflow between compartments
• Door alignment and leveling matter for good sealing and easy closing

What you will notice in daily use

Bottom-mount models are often chosen for convenience and organization.

Feature	Bottom-mount refrigerator	Top-freezer refrigerator
Fresh-food access	Higher, easier reach	Lower, more bending
Freezer access	Lower drawer/compartment	Upper door
Best for	Frequent fresh-food use	Frequent freezer use

Why it matters

Because the fresh-food doors are used most often, a bottom-mount design reduces bending and can help you keep refrigerated groceries more visible and organized. Proper leveling also helps the doors close and seal correctly, which supports stable temperatures and efficiency.

Helpful model-specific tips

For Kenmore 79570333411, we recommend these basics to keep the bottom-mount design working as intended:

• Level the refrigerator so the front is slightly higher than the back (helps doors close)
• If the gap between the two fresh-food doors is uneven, follow the door alignment steps
• Reinstall shelves to match your storage needs after setup
• Avoid abrasive cleaners or sharp tools on exterior surfaces

For the exact setup and adjustment steps, use the 79570333411 owner's manual.

Last updated: January 2026

Water under your Kenmore refrigerator model 79570333411 is usually caused by a clogged or frozen defrost drain, a water line connection issue, or an overflowing drain pan. Start by checking for ice or debris at the drain opening inside the fresh food section, then inspect the water supply line and valve area.

Quick checks that fix most leaks

• Look for a sheet of ice on the freezer floor or water pooling under crisper drawers (often points to a defrost drain issue).
• Flush the defrost drain with warm water (a turkey baster works well) until it flows freely.
• Check the drain pan underneath for cracks, shifting, or overflow.
• Inspect the water line connection at the back for slow drips.
• Confirm the refrigerator is level and doors close fully (warm air can increase frost and drain clogs).

If the leak is near the water supply

The manual notes that water hammer and improper water line installation can lead to leakage or flooding; the refrigerator water line should connect to a cold water supply. Use the steps in the 79570333411 owner's manual to review the water line connection guidance.

Parts that commonly cause water-related leaks

Symptom	Most likely area	What to check first
Leak only when dispensing water/ice	Water inlet and tubing	Loose fitting, cracked line, valve seepage
Slow puddle behind unit	Water line connection	Compression nut tightness, kinked tubing
Water inside fridge then under unit	Defrost drain	Ice clog, debris in drain hole

If you suspect the valve is seeping, the lg refrigerator water inlet valve AJU72992601 is a common replacement part for this model.

Why it matters

Even a small leak can damage flooring and can also create icing problems that reduce cooling performance. Fixing the root cause (drain, pan, or water supply) prevents repeat leaks and helps the compressor and evaporator system run normally.

Last updated: January 2026

For Kenmore model 79570333411, the safest way to choose the correct water filter is to match the filter to your exact model number. This model uses a specific cartridge style; confirming by model prevents fit issues, leaks, and poor water flow. See the 79570333411 owner's manual for model-specific guidance.

The quickest ways to confirm the right filter

• Match by model number: 79570333411 (use the full number, not a partial).
• Check the existing filter: remove it and match the shape, locking tabs, and label.
• Confirm the filter housing style: inside the fresh food compartment (common) or another location.
• If you recently replaced the filter head or tubing, re-check compatibility with the new setup.
• If you do not want filtration (temporary), use a bypass plug made for the housing.

Filter options commonly used on this model

Based on the parts available for 79570333411, these are the most relevant filter-related items:

What you need	What it does	When to choose it
Genuine Kenmore refrigerator water filter 9690 AGF80300801	Filters drinking water and ice	Routine replacement for normal use
Refrigerator water filter bypass ABN73019101	Allows water flow without a filter	Troubleshooting low flow or when a filter is unavailable
Refrigerator water filter head ADQ36011715	Holds the filter and connects water lines	If the housing leaks, cracks, or will not seal

Why it matters

Using the correct Kenmore refrigerator water filter for 79570333411 helps maintain proper water pressure to the dispenser and ice maker, reduces leak risk at the filter head, and keeps taste and odor performance consistent.

Helpful tip for replacement

For step-by-step filter replacement and flushing guidance, use how to replace the water filter in a Kenmore refrigerator.

Last updated: January 2026