Bosch SHX68R55UC/69 dishwasher Parts

Yes. We sell replacement parts for the Bosch SHX68R55UC dishwasher, including common repair items like a water inlet valve, drain pump, door seal, drain hose, and filters, so you can fix leaks, filling problems, draining issues, and poor cleaning without replacing the whole dishwasher.

How to find the right part for your dishwasher

• Match the part to your exact model: Bosch SHX68R55UC.
• Use the exploded-view diagrams and part lists in the SHX68R55UC manual to confirm placement and part style.
• Identify the symptom first (leak, no fill, not draining, not cleaning) and then choose the part category.
• Compare your old part’s markings and connector style before ordering.
• Replace related wear items together when it makes sense (for example, a leaking door area often involves seals and alignment).

Popular replacement parts for SHX68R55UC

Problem you see	Part that often fixes it	What it does
Dishwasher will not fill or fills slowly	Dishwasher water inlet valve 00622058	Opens to let water into the tub
Dishwasher will not drain	Drain pump 00642239	Pumps water out to the drain line
Water leaking at the door	Door seal 00432490	Seals the lower door edge to prevent leaks
Drain leaks or poor draining due to hose issues	Dishwasher drain hose 00668108	Routes wastewater to the sink drain or disposer
Debris buildup, poor wash performance	Dishwasher drain filter 17008311	Traps food particles to protect the pump

Why it matters

Using model-correct Bosch parts helps restore proper water flow, sealing, and drainage. That prevents repeat leaks, reduces cycle interruptions, and improves cleaning and drying performance.

Last updated: February 2026

Yes, repairing a Bosch dishwasher is usually worth it, especially when the unit is under about 10 years old and the problem is limited to one failed part (not multiple major failures). For the Bosch SHX68R55UC, we typically recommend repair when the estimate is under about 50% of the cost of a comparable new dishwasher.

Quick decision checklist

• Age: Under 6 to 10 years old usually favors repair.
• Repair cost: Under ~50% of replacement cost usually favors repair.
• Failure type: Single-part failures (leaks, fill, drain) are often good repair candidates.
• Performance history: If it has cleaned and drained well until recently, repair is usually smart.
• Multiple symptoms: If it leaks, won’t drain, and won’t start, costs can stack up quickly.

Common repairs that are often worth it (and why)

Many Bosch dishwasher issues come down to a few serviceable parts. If your symptoms match one of these, repair is typically cost-effective:

Symptom	Likely area	Example part for SHX68R55UC	Typical outcome
Won’t fill or fills slowly	Water supply, inlet valve	Dishwasher water inlet valve 00622058	Restores proper fill and wash pressure
Won’t drain	Drain path, drain pump, hose	Drain pump 00642239	Restores draining, prevents standing water
Leaks at the bottom of the door	Door sealing surface	Door seal 00432490	Stops seepage and protects flooring

When replacement makes more sense

Replacement is usually the better value when:

• The control system is failing along with other issues (intermittent power, multiple error conditions).
• The dishwasher has repeated leaks that have damaged multiple components.
• The unit is 10+ years old and needs a high-cost repair plus additional maintenance.

Why it matters

A targeted repair can extend the life of a quality Bosch dishwasher and avoid the cost and hassle of replacement, but a high estimate on an older unit can turn into repeated repairs.

For model-specific operating guidance and error information, use the SHX68R55UC manual and our Bosch dishwasher error codes reference.

Last updated: February 2026

The most common Bosch dishwasher issue we see on the SHX68R55UC is poor cleaning or water not moving correctly through the wash system, usually tied to restricted water flow (clogged filter, blocked spray arms) or a fill or drain problem. Use the SHX68R55UC manual to match symptoms to the right checks.

Most common symptoms and what they usually mean

• Dishes come out dirty: spray arms blocked, filter/sump area clogged, low water fill
• Not draining or standing water: drain path restriction, drain pump issue, kinked hose
• Not filling or fills slowly: water supply valve closed, inlet screen clogged, inlet valve problem
• Poor drying: rinse aid empty, wrong cycle options, plastic items holding water
• Leaks at the door: door seal worn or not seated

Quick checks we recommend first (fast, no parts)

1. Cancel and drain; confirm you hear a strong drain at the end.
2. Clean the filter area and remove debris from the sump.
3. Spin spray arms by hand; clear food, labels, or mineral buildup from holes.
4. Verify hot water supply and that the shutoff valve is fully open.
5. Check the drain hose routing for kinks and a proper high loop.

Common parts that solve these problems

Symptom	Most likely area	Example part for SHX68R55UC
Not filling	Fill system	Dishwasher water inlet valve 00622058
Not draining	Drain system	Drain pump 00642239
Leaking at bottom of door	Door sealing	Door seal 00432490

Error codes can speed up the diagnosis

If your Bosch displays an error code, use Bosch dishwasher error codes to narrow the problem to the fill, heat, drain, or sensor system before ordering parts.

Why it matters

Most “common problems” are flow-related. When water cannot enter, circulate, or drain correctly, cleaning performance drops fast and cycles can stop mid-wash. A simple filter clean or hose correction often fixes it; when it does not, the inlet valve, drain pump, or door seal are frequent next steps.

Last updated: February 2026

A Bosch dishwasher typically lasts 10 to 15 years with normal household use and basic maintenance. For your Bosch SHX68R55UC, keeping the filters clean, preventing leaks, and fixing small drain or fill problems early helps you reach the high end of that range (or longer). See the SHX68R55UC manual for model-specific care and cleaning guidance.

What affects dishwasher lifespan most

• Filter and sump cleanliness (food debris left in the system strains the wash and drain pumps)
• Water quality (hard water can cause mineral buildup on internal parts)
• How often you run it (multiple loads daily increases wear)
• Leak prevention (a worn seal can lead to water damage and corrosion)
• Prompt repairs when symptoms start (slow draining, not filling, unusual noises)

Maintenance checklist (simple, high impact)

• Clean the filter area regularly; rinse screens and remove debris.
• Run a dishwasher cleaner periodically to reduce grease and mineral buildup.
• Check the door sealing surfaces and wipe them clean.
• Use the right detergent amount; too much can cause excess suds and residue.
• Address draining issues quickly; a struggling pump shortens component life.

Common wear items and what they do

Symptom	Likely system involved	Example part for SHX68R55UC
Won’t fill or fills slowly	Water inlet system	Dishwasher water inlet valve 00622058
Won’t drain, water left in tub	Drain system	Drain pump 00642239
Leaks at the bottom of the door	Door sealing	Door seal 00432490

Why it matters

A dishwasher that is maintained and repaired early usually costs less to own over time. Keeping water moving correctly (fill, wash, drain) reduces stress on the motor, pump seals, and electronics, which are some of the most expensive components.

Last updated: February 2026