Owner’s manual
Error Codes
Can you still get parts for a Kenmore dishwasher?
Yes. We still see strong parts availability for many Kenmore dishwashers, including model 66513829K601, because common wear items (heating, draining, sealing, and controls) are widely supported. The key is matching parts to your exact model number and confirming fit using the 66513829K601 owner's manual.
- Use the full model number 66513829K601 from the model and serial label.
- Identify the symptom (no heat, not draining, leaking, dead control panel).
- Compare the part description to the dishwasher section it serves (wash, drain, door, electrical).
- If the dishwasher is leaking, inspect the door seal and tub lip for debris before replacing parts.
- If it will not start, verify power at the breaker and door latch closure before ordering electronics.
These are frequent replacements for this model family and are often in stock:
| Problem you notice | Part that often fixes it | Example for this model |
|---|---|---|
| Dishes not drying, water not heating | Heating circuit issue | Dishwasher heating element W10518394 |
| Water left in bottom, won’t drain | Drain system issue | Dishwasher drain pump WPW10348269 |
| Water leaking at the door | Door sealing issue | Dishwasher door seal W10542314 |
| No fill or slow fill | Fill valve issue | Dishwasher water inlet valve WPW10158389 |
Kenmore dishwashers are built around long-running platforms, and many components remain serviceable for years. Your manual also shows core serviceable items such as the heating element, water inlet opening, spray arms, and overfill protection float, which are designed to be replaced when they wear out (see the parts and features section in the 66513829K601 owner's manual).
If your dishwasher is displaying a code or blinking pattern, use a model-family code chart to narrow the failure to a system (drain, heat, fill, control) before buying parts: Kenmore 665 model dishwasher error codes.
Last updated: February 2026
Is it worth repairing a Kenmore dishwasher?
Yes, repairing a Kenmore dishwasher like model 66513829K601 is usually worth it when the unit is under about 10 years old and the fix is a common wear item (seal, drain hose, heating). If the repair involves major electronics or a full pump/motor assembly, replacement can make more sense.
- If the dishwasher is cleaning well and only has one symptom (leak, no drain, no heat), repair is typically the best value.
- If you need multiple expensive parts at once, replacement is usually the better value.
- If the tub is damaged or heavily leaking from the tub area, replacement is typically the better choice.
- If you have an error code, identify it first so you do not replace the wrong part.
- If the dishwasher has been reliable and the racks and door still feel solid, repair is typically worthwhile.
| Repair type | Common symptom | Example part for 66513829K601 | “Worth it” signal |
|---|---|---|---|
| Heating fix | Water not heating, poor drying | Dishwasher heating element W10518394 | Usually worth repairing |
| Drain fix | Standing water, won’t drain | Dishwasher drain pump WPW10348269 or dishwasher drain hose 8269144A | Usually worth repairing |
| Leak at door | Water at front corners | Dishwasher door seal W10542314 | Usually worth repairing |
| Control issue | Dead panel, erratic cycles | Dishwasher electronic control WPW10084141 | Often replace if older |
| Major circulation | Poor wash, loud motor | Pump/motor assembly (varies) | Often replace if older |
A dishwasher repair is most cost-effective when it restores core functions (fill, wash, drain, heat) with one targeted part. Once you get into high-cost electronics or multiple failures, you can spend close to the price of a new unit without gaining newer efficiency and features.
- Check the troubleshooting section and cycle indicators in the 66513829K601 owner's manual.
- If drainage is the issue, also check the sink drain air gap (if your setup has one); the manual notes it is an external plumbing device and should be cleaned periodically.
- Pull any stored error code and match it to the right failure path using Kenmore 665 model dishwasher error codes.
Last updated: February 2026
How do I find the model number on my 66513829K601?
Your Kenmore dishwasher’s model number is printed on the model and serial number label attached to the dishwasher. On model 66513829K601, use that label to record the full model number and serial number exactly as shown; see the 66513829K601 owner's manual for label details.
Check these common label locations used on Kenmore dishwashers like 66513829K601:
- Along the inner edge of the door (top or side) when you open the door
- On the door frame around the tub opening
- On the right or left side of the tub opening, near the front
- Occasionally on the side of the dishwasher cabinet (visible when the door is open)
The manual’s product record section calls out the exact information to save for faster service and correct parts matching.
- Complete model number (example format: 665.1382# in the manual; your label shows the exact full number)
- Serial number
- Purchase date (from your receipt or records)
- Copy every character, including dots, letters, and numbers
- If your label includes a color code, record it too
- Use the model number from the label, not the number on the control panel or user interface
| Item | What it tells us | Used for |
|---|---|---|
| Model number | The exact dishwasher design and parts fit | Ordering correct replacement parts and diagrams |
| Serial number | The unit’s production identity | Service history, manufacturing details |
Kenmore 665-series dishwashers can look similar but use different pumps, controls, seals, and racks. Using the exact model number from the label helps us match the right parts the first time.
Last updated: March 2026
