Roper RT14BKXKQ02 top-mount refrigerator Parts

Most top-freezer (top-mount) refrigerators weigh about 150 to 200 lb, and the Roper RT14BKXKQ02 typically falls in that range. The exact weight depends on cabinet size, shelves, and whether an ice maker kit is installed.

• Compact top-freezer units: ~90 to 140 lb
• Standard 14 to 18 cu. ft. top-freezer units: ~150 to 200 lb
• Larger top-freezer units: ~190 to 240 lb
• Add-ons can increase weight: ice maker kit, extra glass shelves, door bins

Knowing the approximate weight helps us plan safe moving, protect flooring, and avoid damaging the sealed system (compressor and refrigerant lines) when tilting or transporting the refrigerator.

• Empty food and remove loose items (bins, shelves) to reduce load.
• Use an appliance dolly and keep the unit as upright as possible.
• Protect floors with a hard runner or plywood if rolling over soft flooring.
• If you must tilt it, keep the tilt minimal and avoid laying it flat.
• After transport, let it sit upright before plugging in (longer if it was heavily tilted).

If the refrigerator is hard to roll or won’t sit level after you move it, worn rollers can be a factor. For this model, we list the cabinet roller WPW10475495.

Last updated: January 2026

In a Roper RT14BKXKQ02 top-mount refrigerator, the upper compartment is typically called the freezer compartment (or simply the freezer). On most top-mount designs, the refrigerator (fresh food) section is the larger lower compartment.

• Freezer compartment: the upper section that freezes food
• Freezer section: another common term for the same area
• Fresh food compartment: the lower refrigerator section for everyday refrigerated items
• Evaporator area: the cooling system area often located behind the rear panel in the freezer

Many cooling complaints start in the upper section because the freezer is where cold air is produced and then circulated to the refrigerator section.

If the freezer is cold but the refrigerator is warm, the issue is often airflow related.

If you are diagnosing poor airflow or warming temperatures in the RT14BKXKQ02, these model-matched parts are commonly involved:

• Evaporator motor WPW10189703 (moves cold air through the freezer and into the fresh food section)
• Refrigerator heater WP2263749 (defrost heater that helps prevent heavy frost on the evaporator)

• How to fix your evaporator cooling fan

Knowing the upper section is the freezer helps you describe symptoms accurately and focus checks on the evaporator fan, defrost system, and airflow paths that control temperatures in both compartments.

Last updated: January 2026

A top-mount refrigerator (like the Roper RT14BKXKQ02) has the freezer compartment on top and the fresh-food (refrigerator) compartment below. This layout is popular because it is simple, reliable, and typically offers good usable refrigerator space for the overall size.

• Freezer on top: shelves or a bin for frozen food
• Refrigerator below: main shelves, crisper drawers, and door bins
• Single cooling system: cold air is produced at the evaporator and circulated to both sections
• Basic controls: temperature settings usually adjust airflow and compressor run time

Knowing it is a top-mount helps narrow down likely causes when cooling is off, frost builds up, or airflow is weak. For example, many “warm fridge, cold freezer” complaints point to airflow or fan issues, and we often check the evaporator fan motor first.

• If you hear no fan noise when the compressor is running, the evaporator motor WPW10189703 is a common part to inspect.
• If the compressor struggles to start (clicking, humming, then stopping), the refrigerator overload and start relay WP4387938 is often part of the starting circuit to check.
• If frost builds up and airflow drops, the defrost system (including the refrigerator heater WP2263749) is a common area to diagnose.

• How to fix your evaporator cooling fan

Last updated: January 2026