Kenmore 79094463700 electric range Parts

To tell how old your Kenmore electric range model 79094463700 is, we use the serial number from the model label and decode it using the date format tied to the model prefix. On this model family (790.), the serial plate is typically on the right side of the oven front frame inside the storage or warmer drawer area.

Where to find the model and serial number label

We look for the identification plate (serial plate) in these common spots:

• Right side of the oven front frame in the storage or warmer drawer compartment
• Lower right front frame of the appliance
• Under the cooktop (alternate location)

For pictures and exact wording for your unit, check the owner's manual.

How to estimate the age from the serial number

Once you have the serial number, we decode it based on the model prefix.

• Confirm the model prefix: 790 (your model number starts with 790)
• Write down the full serial number exactly as shown
• Decode the serial number to identify the manufacturing date code (year and month)

If the label is worn or hard to read, take a clear photo with the drawer pulled out and the oven door open; glare is the most common reason numbers look “missing.”

Quick reference: what you need to decode

Item	What to record	Where it’s used
Model number	79094463700	Confirms the correct serial format family
Serial number	Full serial string	Contains the date code
Purchase date (if known)	Month/year	Helps confirm the decoded result

Why it matters

Knowing the age helps us match the right Kenmore parts and troubleshooting steps for your exact production run. It is especially useful when ordering electrical parts like an oven sensor or control board, where revisions can change fit and wiring.

Last updated: February 2026

On Kenmore electric range model 79094463700, the model number is printed on the serial plate located on the right side of the oven front frame, inside the storage drawer or warmer drawer compartment. Pull the drawer open and look along the right-side frame for the identification plate (model and serial). See the owner's manual for the exact serial plate location illustration.

Quick steps to locate the model number

• Turn the oven light on and use a flashlight for easier viewing.
• Pull the storage drawer or warmer drawer fully open.
• Look on the right side of the oven front frame (not the drawer itself).
• Wipe the plate gently with a damp cloth if it is greasy or dusty.
• Record both the model and serial numbers for parts lookup and service history.

Common places people check first (and miss)

For this model, the serial plate is not typically on the back panel or the cooktop surface. Here is a quick comparison:

Location checked	Is it typical for 79094463700?	What you will find
Inside drawer compartment, right front frame	Yes	Model and serial plate
Oven door jamb area	Sometimes on other ranges	May be blank on this model
Back of range near the cord/vent	Sometimes on other appliances	Usually not the ID plate for this model

Why it matters

We use the full model number to match the correct Kenmore parts diagrams and ensure compatibility for items like a bake element, broil element, or oven temperature sensor.

Last updated: February 2026

To reset your Kenmore 79094463700 electric range, we restore power to clear the control board: turn the range off at the breaker (or unplug it), wait about 1 minute, then turn power back on and reset the clock and any cooking settings per the owner's manual.

Quick reset steps (power cycle)

• Turn OFF the range circuit breaker (or unplug the power cord if accessible).
• Wait 60 seconds.
• Turn the breaker ON (or plug the range back in).
• Set the clock again (the display may show a clock prompt after power returns).
• Test Bake and Broil to confirm the range responds.

If the reset was after a power outage

Our manual notes that you should not operate the range during a power failure; once power resumes, the range can begin operating again if it was left on. After power returns:

• Confirm all knobs are in OFF.
• Reset the clock and oven function settings.
• Run a short test bake to verify normal heating.

What a reset fixes (and what it does not)

A power-cycle reset is most useful for a frozen display, unresponsive keypad, or a minor control glitch.

Symptom	Reset likely helps?	Common next step if it returns
Display or keypad not responding	Yes	Check for stuck keys; consider the range oven control board and clock 316462804 if failures persist
Oven not heating but controls work	Sometimes	Check bake/broil components and temperature sensing
Error code keeps coming back	Sometimes	Look up the code and follow the diagnostic steps

Why it matters

Resetting by removing power is the safest way to clear the electronic control without changing wiring or parts. It also forces the range to restart its normal startup checks, then prompts you to set the clock again.

Last updated: February 2026

Kenmore model numbers tell you who built the appliance and which design series it is. For Kenmore range model 79094463700, the 790 prefix identifies the manufacturing source used for many Kenmore ranges; the remaining digits narrow down the exact configuration so you can match the correct parts and instructions in the owner's manual.

Where to find the model number on this range

On Kenmore 79094463700, we look for the identification plate in a very specific spot:

• Open the storage or warmer drawer compartment
• Check the right side of the oven front frame
• Record both the model and serial number
• Keep the numbers with your purchase records for future reference

How to decode a Kenmore model number (simple breakdown)

Most Kenmore model numbers follow a predictable pattern.

• Prefix (first 3 digits): points to the manufacturing source used for that Kenmore product line
• Middle digits: identify the base platform or series
• Last digits: indicate feature variations, revisions, or production changes

Quick example

Example	What it tells you	Why you care
79094463700	Kenmore range with a 790-prefix platform	Helps match the right parts list and service info

Why it matters for parts and troubleshooting

Using the full model number prevents ordering the wrong bake element, control board, or sensor. It also ensures you follow the correct procedures for features like warmer drawer settings, self-clean, and oven temperature adjustment.

If you are diagnosing a display fault or beeping, use the model family to choose the right error-code set; for many 790-prefix ranges, the Kenmore 790 range 4-digit error codes guide is the best starting point.

Last updated: February 2026