Installation guide
Owner’s manual
Error Codes
Where can I find my Frigidaire oven part number?
On your Frigidaire FFGF3015LBE gas range, the model and serial tag (the information you use to look up the correct parts) is typically on the right-hand front frame area near the storage or warmer drawer, or visible when you open the drawer. Confirm the exact location in the FFGF3015LBE installation guide.
What to look for on the tag
Use the information on the identification plate to match parts correctly.
- Model number (FFGF3015LBE)
- Serial number
- Lot number or letter (often needed when ordering parts)
- Fuel type and gas pressure the range was set for at the factory
- Burner ratings (BTU information)
Common locations on this model
For sealed burner ranges like the FFGF3015LBE, the tag is usually in one of these spots:
| Location | How to access it | What you will see |
|---|---|---|
| Right-hand oven front frame near the drawer opening | Pull out the storage or warmer drawer | Identification plate with model and serial |
| Inside the drawer opening area | Open the drawer fully and look along the frame | Model and serial information |
Why it matters for ordering the right part
We use your model and serial information to ensure the replacement part fits your exact Frigidaire range configuration (especially when parts vary by production run). That helps avoid ordering the wrong igniter, control board, or burner component.
Quick tip for parts lookup
If you are replacing a common failure item, match it to your model first, then choose the exact part listing. For example, an oven that will not heat often points to the range oven igniter 5304509706 on this model.
Last updated: February 2026
Who makes Frigidaire gas ranges?
Frigidaire gas ranges, including model FFGF3015LBE, are made under the Frigidaire brand, which is part of Electrolux (Electrolux Home Products). For ownership and product details tied to your range, we recommend checking the brand and model information in the FFGF3015LBE owner’s manual.
Quick facts about the brand
- Brand on the appliance: Frigidaire
- Parent company: Electrolux
- Appliance type: Gas range (like FFGF3015LBE)
- Where to confirm your exact model: Rating/serial plate (often found by opening the broiler or storage drawer)
How to confirm you have the right model for parts
Using the correct model number matters because igniters, control boards, and burner parts can vary by revision.
- Open the broiler drawer or storage drawer.
- Find the serial plate.
- Match the model number exactly to FFGF3015LBE.
What you will typically see on the serial plate
| Item | What it’s used for |
|---|---|
| Model number | Ensures correct part fit and diagrams |
| Serial number | Helps identify production run details |
| Purchase date (your record) | Useful for service history |
Why it matters
When you are troubleshooting heating or ignition issues, the manufacturer family helps you narrow down the right repair approach and parts. For example, common Frigidaire gas-range repairs involve components like the range oven igniter 5304509706 or the oven control system, and the correct match depends on the exact model.
Last updated: February 2026
How do I tell what model my Frigidaire stove is?
For your Frigidaire gas range model FFGF3015LBE, the model number is printed on the identification plate (model and serial tag). On this style of range, you’ll typically find it on the right-hand front frame area near the storage or warmer drawer, or in the lower front panel area.
Where to look on a Frigidaire range
Check these common spots first (use a flashlight and wipe grease off the tag so the characters are readable):
- Open the storage drawer or warmer drawer and look at the right-hand front frame
- Look around the lower front panel area near the drawer opening
- If your range has a broiler drawer, open it and check for the serial plate inside that area
- Record both the model number and serial number exactly as shown
- Also note any lot number or letter shown on the plate (helpful for parts matching)
What the identification plate tells you (and why it matters)
Besides the model and serial, the plate can list key gas information that affects parts and service.
| Item on plate | Why it matters |
|---|---|
| Model number | Ensures you get the correct Frigidaire parts for your exact range |
| Serial number | Helps identify production details for service and support |
| Fuel type and pressure setting | Confirms how the range was adjusted when it left the factory |
| Burner ratings (BTU) | Helps verify correct burner components and performance |
Tips to avoid common mistakes
- Write the model number exactly; letters and numbers can look similar (for example, 0 vs O)
- Take a clear photo of the tag before ordering parts
- Use the model number when selecting parts like an igniter, control board, or temperature sensor
For the most accurate location details and how Frigidaire labels the plate on this range style, use the FFGF3015LBE installation guide and the FFGF3015LBE owner’s manual.
Last updated: February 2026
What does F30 mean on a Frigidaire stove?
On the Frigidaire FFGF3015LBE gas range, the F30 error code points to a problem in the oven temperature sensing circuit, most commonly a failed oven temperature sensor probe, a loose connection, or damaged sensor wiring.
What to check first (quick, practical steps)
- Turn off power to the range at the breaker for 1 minute, then restore power and see if the code returns.
- If the code returns, inspect the sensor harness connection at the back of the control area (look for a loose plug or pinched wires).
- Check for heat damage or broken insulation on the sensor wires where they route behind the oven.
- If the oven was recently moved or serviced, re-seat connectors that may have been pulled partially loose.
- Use the troubleshooting section in the FFGF3015LBE owner's manual to match the symptom (no heat, overheating, or error code) to the next check.
Likely fix: replace the oven temperature sensor
If wiring and connections look good, the most common repair is replacing the sensor probe. For this model, the sensor is a separate part from the igniter and control board.
Related part (when temperature readings are wrong): Range oven temperature sensor 316233903
How the symptoms usually line up
| What you notice | Most likely cause | What to do next |
|---|---|---|
| F30 appears and oven will not heat | Sensor circuit open (probe or wiring) | Check connector, then replace sensor |
| F30 appears after preheat starts | Intermittent connection or heat-damaged wiring | Inspect harness routing and terminals |
| Temperature is erratic before F30 shows | Sensor drifting out of spec | Replace sensor |
Why it matters
The control board relies on the temperature sensor signal to regulate bake and broil safely and accurately. When that signal is missing or out of range, the range may stop heating or heat unpredictably, so addressing F30 quickly helps restore normal oven performance.
Last updated: February 2026
Can I look up Frigidaire parts by model number?
Yes. For your Frigidaire gas range model FFGF3015LBE, looking up parts by the exact model number is the most reliable way to get compatible replacement parts because it matches the correct diagrams, revisions, and part substitutions for your specific range.
Where to find the model number on this range
On many sealed-burner Frigidaire ranges, the identification plate is located on the right-hand surface of the oven front frame near the storage drawer or lower panel area. The Use & Care information also commonly points to the broiler drawer or storage drawer area.
Use the location details in the FFGF3015LBE owner's manual to confirm the exact spot on your unit.
What to record from the ID plate
- Model number: FFGF3015LBE
- Serial number
- Lot number or letter (often listed on the same plate)
- Fuel type and pressure rating (helpful for gas-related parts)
How model-number lookup helps you get the right part
Searching by model number narrows results to parts that fit your exact configuration, including control parts, igniters, and gas components.
| What you search | What you get | Best for |
|---|---|---|
| Model number (FFGF3015LBE) | Model-specific parts list and diagrams | Most repairs and all fit checks |
| Part ID or part number | One exact part listing | Reordering a known part |
| Description only (example: “igniter”) | Many similar results | Quick browsing, not final selection |
Example: common parts people replace on FFGF3015LBE
If your oven will not heat or takes too long to ignite, one common suspect is the oven igniter. A model-number lookup helps confirm the correct igniter for your range, such as the range oven igniter 5304509706.
Other frequently searched items include:
- Oven light bulb
- Oven temperature sensor
- Spark module or igniter switch harness
- Pressure regulator
Why it matters
Gas ranges often have multiple versions that look identical but use different igniters, orifices, or control components. Using FFGF3015LBE (plus the serial and lot information) prevents ordering a part that does not match your range’s build.
Last updated: February 2026
