Error Codes
Can I look up Frigidaire parts by model number?
Yes. For your Frigidaire electric range model FED355CCSC, looking up parts by the full model number is the most reliable way to get compatible replacements because it filters results to the exact configuration of your range (surface elements, oven elements, switches, trim, and more).
We recommend using the complete model number exactly as shown on the appliance ID tag.
- Check the oven door frame or door jamb area
- Look around the storage drawer opening (if your range has a lower drawer)
- Check behind the control panel area (on some ranges)
- Write it down exactly, including all letters and numbers
- If there is also a serial number, keep it for reference (it helps with production variations)
Once you search FED355CCSC, you can match parts by function and size, then confirm the part ID before ordering.
| What you need to fix | Common matching part type | Example for FED355CCSC |
|---|---|---|
| Large burner not heating | 8-inch surface element | 8 element 316442301 |
| Oven not baking | Bake element | Oven bake element 318255006 |
| Oven not broiling | Broil element | Oven broiler element 318255605 |
| Burner cuts in and out | Element receptacle/support | Support 5303935058 |
Frigidaire ranges often use similar-looking parts across many models, but small differences (element size, terminal style, mounting points, wiring connections) can cause a part to not fit or not work correctly. Searching by FED355CCSC keeps you aligned with the correct Frigidaire range parts for your exact unit.
- Confirm the symptom (surface burner vs. oven bake vs. broil)
- Match the size (6-inch vs. 8-inch surface element)
- Compare the part ID and description to your old part
- Replace any heat-damaged connectors at the same time when applicable
- Restore power and test one function at a time after installation
Last updated: February 2026
How do I reset my Frigidaire electric range?
To reset your Frigidaire FED355CCSC electric range, we recommend turning off power at the breaker (or unplugging the cord) for 30 to 60 seconds, then restoring power. This clears many control glitches; if the oven and all surface burners still do not heat, focus on the home power supply.
- Turn all surface controls to OFF.
- Switch the range breaker OFF (or unplug the range).
- Wait 30 to 60 seconds.
- Restore power, then set the clock and test Bake and one surface element.
- If the display is blank or erratic, repeat once with a full 2-minute power-off.
When all burners and the oven fail to heat on an electric range, the most common cause is a power issue (one leg of 240V missing) rather than a bad bake element.
- Check that the range breaker is a 2-pole breaker and both sides are fully on.
- If the range was recently installed, confirm the cord/terminal block wiring is correct.
- If the cooktop works but the oven does not, inspect the bake circuit and consider the oven bake element 318255006.
- If broil does not work either, the oven broiler element 318255605 is another common failure point.
| What you see | Most likely cause | What to do next |
|---|---|---|
| Clock/lights work, but no heat anywhere | Missing 240V (half power) | Check breaker, outlet, wiring |
| Surface burners heat, oven will not | Failed oven heating part or control issue | Test bake/broil elements, wiring |
| Oven heats poorly or unevenly | Weak bake element | Replace bake element |
A reset fixes minor electronic lockups, but it will not restore heat if the range is only getting 120V or if a heating component (like a bake element) is open. Checking power first prevents unnecessary parts replacement.
Related help: Frigidaire self-cleaning range error codes
Last updated: February 2026
What does F91 mean on a Frigidaire oven?
On the Frigidaire FED355CCSC electric range, the F91 error code means the control detected too many failed attempts to unlock the oven door (maximum door unlock attempts exceeded). This usually points to a problem in the door lock system, not a cooking temperature issue.
- Press Cancel/Clear Off to stop the cycle and let the range cool.
- If the oven is hot, wait 60 to 90 minutes; the lock often will not release until temperatures drop.
- Turn off power at the breaker for 1 minute, then restore power to reset the control.
- Check that the door is fully closed and not binding on the frame.
- If the door is still locked, avoid forcing it; that can bend hinges or damage the latch.
| Likely cause | What you may notice | Common fix |
|---|---|---|
| Door lock motor or latch mechanism sticking | Repeated clicking, door stays locked | Replace the latch motor or latch assembly (as applicable) |
| Door lock switch not changing state | Code returns quickly after reset | Test/replace the lock switch |
| Wiring connection issue to lock circuit | Intermittent lock behavior | Inspect and repair harness/terminals |
| Control not sensing lock position | Lock works sometimes, code persists | Diagnose control and lock circuit together |
If the lock system is acting up during or after self-clean, these model-specific parts are often checked during diagnosis:
- Latch motor 318095956 (drives the lock mechanism)
- Oven light switch 318394803 (a door/lock-related switch used in some circuits)
The oven door lock is a safety system. When the control cannot confirm the door is unlocking correctly, it stops and posts F91 to prevent unsafe operation and to protect the latch, hinges, and door seal.
Last updated: February 2026
