Kenmore Elite 79075603702 gas range Parts

Yes. You can still get parts for Kenmore appliances, including the Kenmore Elite range model 79075603702, by matching your exact model and serial information to the correct replacement part. Using the model and serial plate details helps ensure the part fits and functions correctly.

For model 79075603702, the serial plate is located on the drawer side frame. We recommend using the model number, serial number, and any lot number or letter from that plate when ordering parts.

• Locate the serial plate on the drawer side frame
• Write down the model number 79075603702 and the serial number
• Include any lot number or letter shown on the serial plate
• Use the parts diagram and part description to confirm the match
• If you are unsure, compare the old part markings to the listing (when accessible)

Reference: 79075603702 owner's manual

These are examples of parts customers often replace on ranges like this; always match by model and part ID.

Kenmore appliances were produced across multiple manufacturing platforms over the years, so the same-looking range can use different components. Matching the exact model and serial plate information prevents ordering the wrong oven control board, burner parts, or electrical components.

If you move the range for service, make sure it is secured with properly installed anti-tip brackets and screws to reduce tip-over risk. Use the 79075603702 installation guide for the correct setup steps.

Last updated: February 2026

For the Kenmore Elite range model 79075603702, the most reliable “reset” is a power reset: turn the range’s power off at the breaker for 1 minute, then restore power and reset the clock. This clears many control glitches without changing cooking settings.

• Power reset (recommended): switch the range circuit breaker OFF for 60 seconds, then ON.
• Cancel a stuck mode: press STOP to cancel an active bake, broil, convection, or timer entry.
• Unlock the control/door (if “LOC” shows): press and hold STOP for 3 seconds to toggle the oven lockout off.
• Restore normal beeps: if the control is in silent mode, change the setting in the control options listed in the 79075603702 owner’s manual.

The oven lockout prevents the oven from being turned on and can lock the door. Use this sequence:

1. Press and hold STOP for 3 seconds.
2. Wait for the “DOOR LOCKED” indicator to stop flashing and the door to fully unlock.

If the control is locked, the oven can look “dead” even though power is present. Clearing lockout is faster than replacing parts like the oven control board.

If the oven still will not heat or the control is blank after a reset, these are common next checks:

• Confirm the range has proper power at the outlet/breaker (dual fuel ranges still need electricity).
• Inspect wiring connections at the terminal block (power cord connection area).
• If the oven temperature is inaccurate, test the sensor circuit; the oven temperature sensor is a common cause.

Helpful model-matched parts:

• Terminal block 5304409888
• Frigidaire range oven temperature sensor 316217002

Last updated: February 2026

Yes. Kenmore Elite is Kenmore’s higher-end line, and appliances like the Kenmore Elite gas range model 79075603702 are typically built with upgraded features, styling, and performance compared with standard Kenmore models. For the exact features and options on your range, use the 79075603702 owner’s manual.

Kenmore Elite generally sits in the mid-to-high-end tier for home appliances. On ranges, that usually shows up as better cooking features, more precise controls, and premium fit and finish.

Common “Elite” traits you’ll see on ranges include:

• More cooking modes (such as convection options on some models)
• Wider temperature capability and more control features
• Heavier-duty grates and burner components
• More robust oven door and insulation design
• More detailed care and cleaning guidance (stainless steel, cooktop maintenance)

The most accurate way to decide if your 79075603702 is “high end” is to compare its real-world capabilities and parts quality to a basic range.

“High end” affects expectations for cooking results, maintenance, and repair costs. For example, premium models often use more specialized components; if you’re troubleshooting temperature accuracy, a key part to check is the frigidaire range oven temperature sensor 316217002.

• Use the Preheat feature when the recipe calls for it; this model’s oven can preheat within a typical range of 170°F to 550°F.
• Place racks before preheating for more even results.
• Keep burner heads and grates clean to maintain steady flame and heat.
• If baking seems off, verify temperature with an oven thermometer before replacing parts.
• Follow the cleaning guidance for stainless steel and cooktop surfaces to protect the finish.

Last updated: February 2026

Kenmore Elite is a Kenmore branding tier used across many appliance types and many production years, so there is not one single “came out” year that applies to every Kenmore Elite product. For your Kenmore Elite range model 79075603702, the reliable way to pin down the year is to decode the serial number on the rating plate using the 79075603702 owner’s manual.

Use the model and serial tag on the range, then match what you see to the identification guidance in the manual.

• Find the rating plate or serial plate on the range (the manual lists the location).
• Write down 79075603702 and the full serial number exactly as shown.
• Record any prefix letters and all digits; those characters drive the date code.
• Take a clear photo of the tag for reference when ordering parts.
• Keep the information with your purchase records for future service.

“Kenmore Elite” describes a feature and finish level; the build year is specific to your unit.

The manufacture year helps us match the correct part revisions for your Kenmore Elite 79075603702 range, especially for items that can change during production runs (controls, wiring, and sensors).

Last updated: February 2026

On the Kenmore Elite range model 79075603702, the model and serial number plate is located on the drawer side frame (you can see it when you pull the storage/warming drawer out). This is the number we use to match the correct parts and diagrams for your exact range.

Check these common label locations in this order:

• Pull out the bottom drawer; look on the left or right drawer side frame for the serial plate
• Look along the front frame behind the drawer opening (use a flashlight)
• If you do not see it, check the oven door jamb area around the frame opening
• For installation and service reference, confirm the label is the serial plate, not a warning label

For the exact location callout for this model, use the 79075603702 installation guide.

We recommend copying the full tag information before ordering:

• Model number (example format: 790.75603...)
• Serial number
• Lot number or letter (often printed near the model and serial)
• Fuel type (gas supply for burners; electric power for oven on dual fuel models)

Kenmore Elite ranges often have multiple revisions that look the same from the outside. Using the model and serial plate info helps us match the correct oven control board, burner parts, and hardware for your exact configuration.

Last updated: February 2026

Kenmore replacement parts are made by the original equipment manufacturer (OEM) that built your specific Kenmore appliance. For the Kenmore Elite range model 79075603702, the design and parts supply are commonly associated with Frigidaire/Electrolux-built platforms, so many replacement parts cross to Frigidaire-style components listed for this model in the 79075603702 owner’s manual.

We recommend matching parts by model number and the exact part ID/part number, not by brand name on the front of the range.

• Use the full model number 79075603702 when searching parts
• Match the part ID shown on the parts list to avoid look-alikes
• Compare the manufacturer part number (for example, 5303013071)
• Confirm the part’s location using the diagrams and parts list
• If you are unsure, verify using the wiring/feature information in the manual

These examples show how Kenmore-branded appliances often use OEM parts from major manufacturers.

Kenmore is a brand label, not a single factory. Knowing the OEM behind your model helps you buy the correct burner, control, sensor, or light component the first time, and it reduces returns caused by similar-looking parts.

Last updated: February 2026

If your Kenmore Elite range model 79075603702 oven is not working, the most common causes are a power supply problem, a control fault (beeping with an F-code), or a failed oven component such as the temperature sensor or control board. Use the checks in the 79075603702 owner's manual to pinpoint the failure safely.

• Confirm the range has power; check the breaker and that the cord/plug is fully seated.
• If there was a power outage, turn the oven controls OFF, then retry (the oven should not restart automatically after power returns).
• If the control is beeping and shows Ff0, F30, or F90, press CLEAR to stop the beeping; reprogram the oven and see if the fault returns.
• If the oven light is out, replace or tighten the bulb (a light issue does not always mean the oven cannot heat).
• If surface burners will not light, make sure gas supply is ON and burner ports are clean (cooktop ignition issues can point to a broader gas supply problem).

These are model-matched parts we often see involved in no-heat or control problems:

• Frigidaire range oven temperature sensor 316217002 (temperature feedback to the control)
• Frigidaire range oven control board 316462835 (runs bake/broil logic and relays)
• Range oven light bulb 316538904 (for a no-light complaint)

An oven that will not run can be as simple as a loose power connection, but repeated fault codes (Ff0/F30/F90) usually indicate an electronic control problem that can stop heating for safety. Checking the easy items first prevents unnecessary parts replacement.

Last updated: February 2026