Kenmore 11068832700 dryer Parts

Your Kenmore dryer’s model number is printed on the model and serial number label; on model 11068832700, that label is located at the top inside the dryer door well. Once you have the full model number, we can match the correct parts, diagrams, and specifications.

Check these spots in this order:

• Top inside the dryer door well (primary location for this model)
• Around the door opening on the cabinet frame
• On the rear panel (less common, but possible)
• Near the lint screen housing (some designs place labels nearby)

Use the format exactly as shown on the label (for example, 11068832700), including all digits.

The label typically includes both a model number and a serial number. Record both in a safe place using the 11068832700 owner's manual.

• Match every digit of the model number; one missing digit can change the parts list
• Use the model number to confirm whether your dryer is gas or electric before buying heating parts
• If you’re troubleshooting heat issues, confirm your exact model before ordering a heater like the dryer heating element WP3387747
• Keep the model number handy when following setup steps in the 11068832700 installation guide

Kenmore model numbers (like the 110-prefix family) identify the exact design and component set. Using the complete model number is the fastest way to get the right dryer timer, door switch, drum support roller, and other common replacement parts.

Last updated: February 2026

The most common problems we see on Kenmore dryer model 11068832700 are no heat or poor heat, won’t start, long dry times from airflow restrictions, and loud squealing or thumping from worn drive parts. These issues usually trace to the heating circuit, door/start switches, venting, or drum support system.

• Dryer won’t start: door switch, push-to-start switch, timer, motor
• No heat or weak heat: heating element, thermal cut-off, thermistor, wiring at the heater
• Long dry times: clogged venting, lint buildup in ducting or blower wheel, restricted lint duct
• Loud squeal or rumble: idler pulley, belt and support wear (often serviced as a kit)
• Drum not turning: broken belt, failed idler pulley, motor or pulley issue

1. Clean the lint screen and confirm strong airflow at the outside vent.
2. Verify the door fully closes and the latch engages; a failed dryer door switch WP3406107 can prevent starting.
3. If it runs but does not heat, inspect the heating circuit; the common replacement is the dryer heating element WP3387747.
4. If it is noisy, inspect the belt path and idler; many owners use a dryer repair kit 4392067 to refresh wear items together.

A dryer that runs with restricted airflow or failing drum support parts can overheat and cause repeat failures. Fixing airflow and the root cause reduces drying time, protects clothing, and prevents damage to the motor and heater.

For model-specific troubleshooting steps and wiring diagrams, use the installation guide.

Last updated: March 2026

A Kenmore dryer like model 11068832700 typically lasts 13 years with normal household use and basic maintenance (good airflow, clean lint path, and not overloading). Keeping the heating and drive systems in good shape is what most directly extends service life.

• Vent airflow: restricted venting overheats the dryer and shortens heater, motor, and thermostat life
• Lint buildup: lint in the blower housing and ducting increases heat and strain
• Load size: chronic overloading wears the drum support and drive components faster
• Heat settings: high heat on every load increases thermal cycling on safety cutoffs and the heater
• Preventive part replacement: replacing worn wear items early prevents secondary damage

• Clean the lint screen every load; replace a damaged screen such as screen W10120998.
• Inspect and clean the exhaust ducting; replace crushed or torn ducting such as dryer exhaust duct WP8563749 when needed.
• Vacuum lint from the lint duct and blower area during periodic deep cleaning.
• Keep the dryer level to reduce vibration and drum wear.
• If you hear squealing or thumping, service the belt and support system before it damages the motor.

Most “dryer died early” situations trace back to poor airflow or ignored noise. Addressing venting and early drive wear keeps your 11068832700 running closer to its full expected lifespan.

For model-specific care and cleaning intervals, follow the owner's manual.

Last updated: March 2026