Kenmore 11074922200 gas dryer Parts

You can identify your Kenmore dryer by finding the model and serial number label on the appliance; for Kenmore model 11074922200, the label is located at the top inside the dryer door well. Once you have the full model number, we can match the correct parts, cycles, and specifications.

Where to find the model number label

Check these common Kenmore dryer label locations (start with the door opening):

• Top inside the dryer door well (most common on Kenmore 110-style dryers)
• Inside the door opening on the cabinet frame
• On the back panel of the dryer cabinet
• Near the lint screen housing (varies by design)

For the exact label location and how it is shown for this dryer, use the 11074922200 owner's manual.

How to read the model number (what it tells you)

Kenmore model numbers help narrow down the platform and the correct parts list.

What you see on the label	What it means for parts lookup	Example
Full model number	Best match for diagrams and parts	11074922200
Serial number	Helps date the unit and confirm production run	Varies
Gas vs. electric type	Determines heating and ignition parts	Gas dryer

Why the exact model number matters

Using the full model number prevents ordering the wrong part when multiple Kenmore dryers look similar. It is especially important for gas dryer components and safety-related items.

Common part-matching examples on Kenmore gas dryers include:

• Door switch style and wiring (example: dryer door switch WP3406107)
• Ignition and flame sensing components
• Drum drive parts such as belt and idler
• Thermostats and thermal cut-offs

Quick tips before you order parts

• Copy the model number exactly as printed (include all digits)
• Record the serial number too; it helps confirm the correct version
• If the label is worn, take a clear photo with good lighting
• Match the appliance type: Kenmore gas dryer vs. electric dryer

Why it matters: The correct model number is the fastest way to get the right Kenmore 11074922200 diagrams, compatible replacement parts, and accurate troubleshooting steps.

Last updated: February 2026

To reset your Kenmore dryer model 11074922200, we recommend a simple power reset: turn the cycle selector to OFF, unplug the dryer for 1 minute, then plug it back in and start a new cycle. This clears many control and cycle interruptions.

Reset steps (safe, works for most issues)

• Turn the Cycle Selector Control to OFF.
• Make sure the door is fully closed.
• Unplug the dryer (or switch the breaker OFF).
• Wait 60 seconds.
• Restore power.
• Select a cycle and press PUSH TO START (per the 11074922200 owner's manual).

If the dryer still will not start after resetting

A reset helps only if the problem is a temporary control interruption. If it still will not run, check these common basics first:

• Confirm the dryer is plugged into a grounded 3-prong outlet.
• Check the house fuse(s) or breaker(s); many dryers use two fuses/breakers.
• Verify the door is firmly closed; a failed door switch can prevent starting.
• Make sure the vent is not crushed or kinked (restricted airflow can trigger overheating protection).
• If the drum light works but the motor will not run, the start circuit or motor circuit needs diagnosis.

Quick part checks that commonly relate to “won’t start”

Symptom	What it often points to	Example part for this model
No response when you press start	Door not sensed closed	Dryer door switch WP3406107
Hums but will not tumble	Drive system binding or belt issue	Dryer drum belt 341241
Runs but shuts down or acts erratic	Overheat protection opening due to airflow	Dryer high-limit thermostat W11050897

Why it matters

Resetting is a fast way to clear a paused cycle or minor control glitch, but repeated “no start” problems usually come from power supply, door-switch sensing, or overheating protection. Fixing the root cause prevents repeat shutdowns and protects the motor and gas burner system.

Last updated: February 2026

For Kenmore 80 Series gas dryers like model 11074922200, the “size” most people mean is the cabinet width; this model is a 29-inch (73.7 cm) wide dryer. Capacity (cubic feet) varies by exact model and drum design, so we use the model’s documentation to confirm fit and clearances.

What “size” can mean (and what we can confirm)

From the installation instructions for Kenmore 11074922200, we can confirm the physical platform size used for installation planning.

• Cabinet width: 29 in. (73.7 cm)
• Venting clearance: most installs need about 5-1/2 in. behind the dryer for the vent elbow
• Door swing clearance: allow space for the door to open fully
• Capacity: measured in cu. ft.; varies across Kenmore 80 Series models

For exact dimensions and spacing diagrams for your laundry area, use the 11074922200 installation guide.

Quick reference: width vs. capacity

Spec	What it affects	Typical use
Width (inches)	Fit in alcove/closet, side clearance	Measuring the space and doorway
Depth/height (inches)	Vent routing, stacking clearance, door swing	Planning hookups and service access
Capacity (cu. ft.)	Load size and drying performance	Comparing dryers for laundry volume

Why it matters

Getting the correct “size” prevents common install problems like crushed venting, poor airflow, and tight clearances that make service difficult. A gas dryer also must be vented outdoors and installed with proper spacing.

Related tip for Kenmore dryers

If you are trying to match features across Kenmore models (including display codes), our Kenmore 110 series electronic control model dryer error codes guide helps you identify what the dryer is reporting and what to check next.

Last updated: February 2026