Installation guide
Error Codes
How do you reset a Kenmore electric stove?
To reset a Kenmore electric range like model 91146564011, we recommend doing a power reset: turn the range off at the breaker (or unplug it), wait 60 seconds, then restore power. This clears many control glitches and restores normal heating.
Quick reset steps (safe and effective)
- Turn all surface element knobs to OFF.
- Switch the range circuit breaker OFF (or unplug the cord if accessible).
- Wait 60 seconds (up to 5 minutes for stubborn control lockups).
- Turn the breaker ON (or plug back in).
- Set the clock, then test Bake and a surface element.
If the reset does not fix it
A reset helps with temporary electronic issues; if the problem returns, a component may be failing.
- No heat in oven: the oven temperature sensor or a heating circuit issue is common.
- Self-clean door won’t unlock: the door lock motor can stick after a clean cycle.
- One burner not heating: the surface element or its control switch may be the cause.
Common parts related to “won’t heat” symptoms
| Symptom | What to check first | Example part for this model |
|---|---|---|
| Oven temperature seems wrong | Oven temperature sensor | Sensor WB21X5301 |
| Burner stays cold | Coil surface element | Range coil surface element, 8-in WB03T10167 |
| Burner won’t regulate heat | Surface element control switch | Range surface element control switch WB23K5027 |
Why it matters
A proper power reset is the fastest way to clear a stuck control or false error condition without replacing parts. If symptoms persist after resetting, testing the heating and control components helps you avoid replacing the wrong part.
Reference for your model
For electrical requirements, anti-tip setup, and safe access guidance during service, follow the installation guide.
Last updated: February 2026
What causes a Kenmore oven to stop working?
On a Kenmore 91146564011 electric range, an oven that stops working is most often caused by a power supply problem (tripped double breaker, loose terminal block connection) or a failed oven component such as the temperature sensor, wiring harness, or an electronic control issue. Use the 91146564011 installation guide for model-specific electrical and installation checks.
Quick checks we recommend first
- Reset the double-pole range breaker fully OFF, then back ON.
- Confirm the outlet and cord are secure; check for heat damage at the terminal block.
- If the cooktop works but the oven does not, focus on oven-only circuits (sensor, harness, controls).
- Make sure the oven is not set to delay start or a special mode that prevents heating.
- If the door is locked after self-clean, let the range cool completely and try again.
Common causes and what to test
| Symptom | Most likely cause | What to do next |
|---|---|---|
| No bake and no broil | Power supply or burned connection | Inspect terminal block and wiring; verify 240V supply (power off before opening panels) |
| Heats erratically, shuts off, or temperature is way off | Oven temperature sensor out of range | Test and replace the sensor WB21X5301 if readings are out of spec |
| Intermittent operation | Loose or damaged wiring | Inspect and repair connections; replace damaged harness if needed |
| Stuck in lockout after self-clean | Door lock motor issue | Check lock mechanism movement and wiring; service if it will not unlock |
Safe troubleshooting steps
- Turn off power at the breaker before removing any panels.
- Look for scorched wires, melted insulation, or loose spade connectors.
- Use a meter to test components and continuity; follow the how to use a multimeter to test electrical parts video.
Why it matters
A failing connection or overheated wire can cause repeated shutdowns and can damage other components like the control and harness. Fixing the root cause early restores reliable heating and helps prevent cascading electrical failures.
Last updated: February 2026
Where can I find my Kenmore electric range model number?
For your Kenmore electric range model 91146564011, the model number is printed on a rating label attached to the range cabinet. We most often see it in the oven door jamb area, behind the oven door, or on the frame behind the storage drawer.
Most common label locations
- Open the oven door and check the door jamb (the frame around the opening)
- Pull out the bottom storage drawer and look on the frame behind it
- Check the back panel near the vent area
- Look along the side frame behind the lower front panel area
Quick steps to find it fast
- Turn the oven light on and use a flashlight.
- Open the oven door; scan the left and right door jamb edges.
- If you do not see it, slide out the bottom drawer and check the frame.
- Write down the full model number exactly as shown (all digits).
What the label usually looks like
| What you see on the tag | What it means | Why we need it |
|---|---|---|
| Model (example: 91146564011) | Your exact range model | Ensures correct parts fit |
| Serial number | Your unit’s production ID | Helps with service history |
| Electrical ratings | Voltage/amps info | Helps with troubleshooting |
Why it matters
Kenmore ranges can look similar across multiple model numbers, but parts like a surface element control switch, oven door switch, or temperature sensor can vary. Using the exact model number helps us match the correct diagrams and replacement parts the first time.
For more model-specific identification notes and installation details, use the 91146564011 installation guide.
Last updated: February 2026
Why is my Kenmore electric oven not getting hot?
If your Kenmore 91146564011 electric oven is not getting hot, the most common causes are a failed heating circuit (bake or broil element), a bad oven temperature sensor, or a wiring/control issue. Start with power supply checks, then test the sensor and heating components.
Quick checks we recommend first
- Confirm the range has full 240V power; a tripped double breaker can leave the oven cold.
- Verify you selected Bake (not Delay, Self-clean, or Control lock).
- Inspect bake and broil elements for blisters, cracks, or burned spots.
- Check for a locked door condition after self-clean.
- Look for overheated terminals or a burnt smell at the rear connection area.
Most likely causes and what to do
| Symptom | Likely cause | Next step |
|---|---|---|
| No heat in Bake and Broil | Power supply, wiring, or control | Verify breaker and wiring connections; then test outputs |
| Broil works, Bake doesn’t | Failed bake element or wiring | Test bake element continuity; inspect terminals |
| Heats but temperature is wrong | Temperature sensor out of range | Test sensor resistance; replace if failed |
Test the oven temperature sensor
The sensor tells the control how hot the oven is; if it reads wrong, the oven can underheat or not heat.
- Shut off power at the breaker.
- Unplug the sensor connector and measure resistance with a multimeter.
- Most range sensors read about 1,080 ohms at room temperature.
- Replace the sensor if it is open, shorted, or far out of range.
For the correct replacement, match the part to sensor WB21X5301.
Why it matters
A “no heat” oven is usually an open circuit (element, sensor, or connection). Testing in order prevents replacing good parts and restores safe, consistent baking.
For model-specific access and safety notes, use the installation guide.
Last updated: February 2026
