Maytag MDE8000AYW dryer Parts

The Maytag MDE8000AYW dryer is a full-size 27-inch platform; most dryers in this class are about 6.0 to 7.0 cu. ft. capacity. For the exact rated capacity for your specific unit, we recommend matching by model and comparing the drum size and configuration when ordering parts such as the dryer drum rear seal WP33001807.

How to confirm capacity on your specific MDE8000AYW

Capacity is tied to the drum volume and drum design (baffles, seals, and rear support). Use these practical checks:

• Check the model tag to confirm the model is MDE8000AYW (letter and number accuracy matters).
• Compare your drum components to the parts list for this model (rear seal, baffles, bearing support).
• If your dryer has longer dry times or feels “small,” inspect for airflow restrictions before assuming capacity is the issue.
• If the drum feels loose or noisy, worn drum support parts can reduce usable space and tumbling performance.

Parts that affect drum space and tumbling

These parts do not change the official capacity rating, but they directly affect how much laundry the drum can tumble properly:

• Dryer drum rear seal WP33001807 (prevents air leaks and helps maintain proper airflow through the drum)
• Tall baffle WP33002032 (lifts and tumbles clothes for even drying)
• Dryer drum bearing kit 306508 (supports the drum and helps prevent sagging and rubbing)

Quick reference: “capacity” vs what you notice in real use

What you mean by capacity	What to check first	Common symptom
Official drum volume (cu. ft.)	Model-specific specs and drum design	None, it is a fixed rating
How much you can dry well	Airflow, seals, baffles, drum support	Long dry times, damp loads
How much fits physically	Drum condition and internal obstructions	Clothes balling up, poor tumbling

Why it matters

Correct capacity helps you load the dryer properly. Overloading reduces airflow and tumbling, which increases dry time and heat stress on components like the heating circuit and thermal fuses.

Last updated: February 2026

On a Maytag MDE8000AYW dryer, “code 800” is not a standard, built-in dryer error code. In most cases, “800” is being shown by a timer/control display or referenced from a diagnostic readout; we treat it as a symptom and troubleshoot the dryer’s heat, airflow, and control operation.

What to check first (fast, high-impact)

• Reset power: unplug the dryer (or switch off the breaker) for 2 minutes, then restore power.
• Confirm the drum turns and airflow is strong at the outside vent hood.
• Clean the lint screen and inspect the lint screen housing for buildup.
• Check for a crushed, kinked, or excessively long vent run.
• If the dryer runs but won’t heat, test the heating circuit safety parts.

Parts that commonly relate to “odd codes” or no-heat symptoms

If the dryer is overheating, not heating, or cycling strangely, these parts are common suspects:

• Dryer thermal fuse, 195-degree f WP33001762
• Dryer thermal fuse, 243-degree f WP307473
• Dryer heating element WP307178
• Dryer timer assembly WP33001730

Quick symptom-to-part guide

What the dryer is doing	Most likely area	Example part on this model
Runs but no heat	Heating circuit safety or heater	WP33001762, WP307473, WP307178
Stops mid-cycle, then runs again later	Overheat/airflow restriction	WP307473, venting
Timer acts erratically or won’t advance	Timer/control issue	WP33001730

Why it matters

A non-standard “800” indication often shows up when the dryer is not operating normally (overheating, poor airflow, or a control/timer issue). Fixing airflow and verifying the thermal fuse and heater circuit prevents repeat failures and improves drying performance.

Helpful DIY reference

For display and diagnostic-style code help, use our Maytag neptune dryer error codes guide as a practical reference for Maytag dryer code behavior and troubleshooting steps.

Last updated: February 2026

Maytag model MDE8000AYW is a dryer; pricing today depends on whether you are buying a used unit locally or repairing the one you own. The most reliable way to estimate cost is to total the specific replacement parts it needs plus labor, if any.

What “cost” usually means for MDE8000AYW

For an older Maytag dryer, the practical price question is typically one of these:

• Used purchase price (varies by condition and local market)
• Repair parts total (based on the symptoms you are fixing)
• Service cost (diagnosis and labor if you hire a technician)
• Preventive maintenance (lint path cleaning, seals, wear items)

Parts that most often drive repair cost

If your MDE8000AYW has common dryer symptoms, these model-matched parts are often involved:

• No heat or shuts off: dryer thermal fuse, 243-degree f WP307473
• No heat or weak heat: dryer heating element WP307178
• Loud squeal or rumble: dryer drum bearing kit 306508
• Poor airflow or rattling: dryer blower wheel 33001790
• Lint leaks or reduced efficiency: dryer drum rear seal WP33001807

Quick symptom-to-cost planning table

What you notice	What to check first	Parts that commonly apply
Takes too long to dry	Venting and lint buildup	Lint filter, blower wheel, seals
Tumbles but no heat	Heating circuit safety and element	Thermal fuse, thermostat, heating element
Thumping or squealing	Drum support and rotating parts	Drum bearing kit, rear seal

Why it matters

A low used price can turn into a high total cost if the dryer needs multiple airflow and drum-support repairs. Matching the symptom to the right part list keeps the estimate accurate and prevents buying unnecessary components.

Last updated: February 2026