Samsung RS265TDBP/XAA-02 refrigerator Parts

The Samsung RS265TDBP is a 26 cu. ft. class side-by-side refrigerator (the manual covers “26 cubic feet and larger capacity”). For exact exterior height, width, and depth for your specific configuration, use the dimensions listed in the RS265TDBP owner's manual.

What “size” usually means

When customers ask for the “size” of a refrigerator, it typically refers to one (or more) of these:

• Capacity (cu. ft.): how much it holds
• Exterior width: fit between cabinets (often 33 to 36 inches for this style)
• Exterior height: fit under soffits or upper cabinets
• Depth: standard-depth vs. counter-depth fit
• Door swing clearance: space needed to fully open doors and drawers

Typical exterior dimensions for this style (planning guidance)

Most Samsung 26 cu. ft. class side-by-side refrigerators are approximately in these ranges (use this for rough planning, then confirm in the manual):

Measurement	Typical range (side-by-side, 26 cu. ft. class)	What to verify in your home
Width	33 to 36 in.	Cabinet opening and trim clearance
Height	69 to 71 in.	Overhead cabinet or soffit clearance
Depth	33 to 36 in.	Counter overhang and walkway space

Why it matters

Getting the right “size” prevents installation problems like doors that cannot open fully, a refrigerator that sticks out too far, or airflow restrictions that can hurt cooling performance.

Quick fit checklist before you buy or move it

• Measure the opening width at the front and back
• Measure height to the lowest overhead obstruction
• Measure depth to the wall, including baseboards
• Confirm door swing space for both freezer and fresh food doors
• Plan a path through doorways and hallways for delivery

Last updated: February 2026

If your Samsung RS265TDBP side-by-side refrigerator is not making ice, the most common causes are the ice maker being turned off, the water supply valve being closed, low water pressure, a warm freezer setting, or an ice blockage in the bucket. Use the checks in the RS265TDBP owner's manual to confirm settings and water supply.

Quick checks we recommend first

• Wait 12 hours after connecting the water line before expecting normal ice production.
• Confirm the water line is connected and the household shut-off valve is fully open.
• Make sure the ice function was not manually stopped; set Ice Type to Cubed or Crushed.
• Check for ice jammed in the ice maker bucket or chute.
• Lower the freezer temperature if it is too warm.
• Verify the refrigerator is level and doors close fully (warm air slows ice production).

Water pressure and flow (this is a big one)

Your RS265TDBP needs 20 to 125 psi of water pressure for the ice maker to operate properly. If pressure is below 20 psi, a booster pump is typically required.

What we check	What “good” looks like	What it points to if not OK
Supply valve	Fully open	No water to ice maker
Water pressure	20 to 125 psi	Slow fill, no ice, small cubes
Ice bucket/chute	No blockage	Ice jam stopping harvest

When a part is likely involved

If the basics above check out, these parts commonly cause “no ice” symptoms:

• Water not filling the ice maker: Refrigerator water inlet valve DA62-02360B
• Ice maker not cycling or ejecting: Samsung refrigerator ice maker DA97-11092B
• Freezer not cold enough or airflow issues: evaporator fan motor, frost buildup, or a defrost problem

Why it matters

Ice makers are simple systems: they need a cold freezer, steady water pressure, and an ice maker that can cycle without a jam. One weak link (like low pressure or a blocked bucket) stops the whole process.

Last updated: February 2026

On a Samsung RS265TDBP refrigerator, a “5E” code is typically cleared by resetting power to the unit. Unplug the refrigerator (or switch the breaker off) for 1 to 5 minutes, then restore power and allow several minutes for the control to reboot.

Reset steps (safe and effective)

• Unplug the refrigerator or turn the circuit breaker OFF.
• Wait 1 to 5 minutes (this fully discharges the control board).
• Restore power and keep the doors closed for 5 to 10 minutes.
• Confirm the interior lights and display come back on normally.
• Give the refrigerator several hours to stabilize temperatures after a reset.

If the code returns quickly after a reset, it usually points to an intermittent connection, sensor issue, or a cooling/defrost-related problem that needs troubleshooting using the RS265TDBP owner's manual.

What to check if 5E comes back

These checks help narrow down whether the issue is airflow, icing, or a component problem:

• Airflow: Make sure food packages are not blocking air vents.
• Door seal: Check for gaps that can cause moisture and frost buildup.
• Fan noise: Listen for unusual fan sounds that can indicate ice interference.
• Ice buildup: Frost behind the rear panel often points to a defrost system issue.
• Recent power events: Surges or outages can trigger temporary control errors.

Common parts involved (when symptoms match)

If you also have warm temperatures, heavy frost, or fan problems, these model-matched parts are commonly involved:

Symptom you notice	Likely area to inspect	Example model-matched part
Heavy frost, poor cooling	Defrost system	Refrigerator defrost heater DA47-00322J
Warm fresh food section, weak airflow	Evaporator fan/airflow	Samsung refrigerator evaporator fan motor DA96-00880D
Temps fluctuate, odd readings	Temperature sensing	Refrigerator temperature sensor DA32-10109W

Why it matters

A reset can clear a one-time control glitch, but a repeating 5E code often means the refrigerator is detecting a condition that can lead to poor cooling, ice buildup, or food temperature swings. Addressing airflow and frost early helps prevent bigger failures.

Last updated: February 2026

The most common issue we see on Samsung refrigerators like model RS265TDBP is a cooling problem caused by frost or ice buildup around the evaporator area, which restricts airflow and makes the fresh food section warm. Ice maker and water dispenser problems are also frequent.

Most common symptoms customers notice

• Refrigerator side warms up but the freezer still feels cold
• Frost or a sheet of ice on the back wall inside the freezer
• Fan noise changes (rattling, grinding, or no fan sound)
• Ice maker stops producing ice or produces small/hollow cubes
• Water dispenser flow is weak or intermittent

What usually causes these problems

On a side-by-side like the RS265TDBP, cooling depends on steady airflow across the evaporator and through the air ducts. When frost builds up, airflow drops and temperatures rise.

Problem area	What fails	What you notice
Defrost system	Defrost heater or sensor	Heavy frost, warming temps
Air movement	Evaporator fan motor or fan blade	Warm fridge, odd fan noise
Water supply	Water inlet valve or low water pressure	No ice, slow water

Quick checks we recommend first

• Confirm vents are not blocked by food packages (blocked air holes can cause cooling issues).
• Check the freezer back panel for heavy frost; that points to a defrost or airflow problem.
• Verify household water pressure is 20 to 125 psi for proper ice maker operation.
• Power reset: unplug for 2 minutes, then restore power and listen for fans.
• Review operating and safety steps in the RS265TDBP owner's manual.

Parts commonly involved (when symptoms match)

If your symptoms line up, these model-compatible parts are often part of the fix:

• Refrigerator defrost heater DA47-00322J (defrost heat to prevent ice buildup)
• Refrigerator temperature sensor DA32-10109W (temperature feedback for control)
• Samsung refrigerator evaporator fan motor DA96-00880D (moves cold air)
• Refrigerator water inlet valve DA62-02360B (feeds water to ice maker and dispenser)

Why it matters

A refrigerator can still “feel cold” in one section while food spoils in another because airflow is the real delivery system for cooling. Catching frost buildup, fan issues, or low water pressure early helps prevent bigger repairs and protects food quality.

Last updated: February 2026