Kenmore 11028722700 washer Parts

Your Kenmore washer model number is printed on the model and serial number label; on Kenmore model 11028722700, that label is located under the washer lid. Once you have the full model number, we can match the correct washer parts, diagrams, and installation instructions.

Where to look on model 11028722700

Check these common spots in this order:

• Under the lid on the tub opening or underside of the lid (primary location for this model)
• Along the top rim of the cabinet opening under the lid
• On the rear panel of the washer cabinet
• Near the control console area (less common on this style)

If the label is dirty or faded, wipe it gently and use a flashlight; taking a close-up photo often makes faint characters easier to read.

What the model number looks like (and what to write down)

For Kenmore washers, the model number is typically a long numeric string. For this washer, it will match the format shown in the 11028722700 owner's manual.

Write down:

• Model number (example format: 110.XXXXXXXX)
• Serial number (helps confirm production details)
• Purchase date (useful for your records)

Why the exact model number matters

Kenmore uses similar-looking cabinets across multiple series, but internal parts can differ. The model number is what we use to ensure the right fit for items like a lid switch, drain pump, or motor coupling.

If you need to replace	Model number helps us match	Example part for this model
Won’t spin or start	Correct safety switch style	Washer lid switch assembly WP8318084
Won’t drain	Correct pump mounting and ports	Washer drain pump WP3363394
Agitator not moving	Correct drive connection parts	Coupling 285753A

Quick tip for ordering parts

Use the full model number 11028722700 when searching, then confirm the part fits your exact model before ordering. If you are installing the washer or moving it, follow the shipping and leveling steps in the installation guide.

Last updated: February 2026

Yes, it’s usually worth repairing a Kenmore washer, including model 11028722700, when the fix restores reliable washing and costs less than replacing the machine. We also recommend checking coverage details and safe DIY guidance in the 11028722700 owner’s manual before you decide.

A practical way to decide (repair vs. replace)

Use these checkpoints to make a clear call:

• Total repair cost vs. replacement cost (parts + labor + any service call)
• What failed (a wear part vs. a major drive or gearcase issue)
• How the washer has been maintained (overloading and poor leveling accelerate wear)
• How urgently you need it back in service (part availability and install time)
• Your comfort with DIY (the manual advises servicing only when you have the skills)

Common repairs that are often worth it on this style of Kenmore washer

Many top-load Kenmore washers can be brought back to solid performance with a targeted part replacement.

Symptom	Often-involved part	Typical outcome
Won’t spin or start	Lid switch	Restores normal cycle operation
Won’t drain	Drain pump	Fixes standing water and drain errors
Agitates poorly	Agitator dogs	Restores agitation action
Loud during spin	Clutch	Improves spin engagement

If your washer won’t start or won’t spin with the lid closed, the washer lid switch assembly WP8318084 is a common fix to evaluate first.

Why it matters

A well-chosen repair can extend the life of your Kenmore washer and avoid the cost and hassle of replacement. The warranty section and safety guidance in the manual also help you decide whether to schedule service or handle a straightforward part swap.

Safety and service notes we follow

The manual’s safety guidance is important during any diagnosis or repair:

• Unplug the washer before accessing internal components
• Do not reach into the tub/agitator if anything is moving
• Do not tamper with controls during troubleshooting
• Only attempt repairs you understand and have the skills to carry out
• Keep children supervised around the appliance

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use. For Kenmore model 11028722700, consistent care (balanced loads, correct installation, and avoiding freezing conditions) helps you reach the upper end of that range; heavy use and neglected maintenance shorten it. See the 11028722700 owner's manual for care and operating guidance.

What affects washer lifespan most

• Load size and balance: loads should move freely; chronic overloading strains the drive system and suspension.
• Installation quality: a level, sturdy floor reduces vibration and wear.
• Water conditions: low pressure or debris can stress fill and drain components.
• Temperature exposure: operating or storing at or below 32°F (0°C) can lead to damage if water remains inside.
• Wear items: some parts are designed to wear over time (for example, couplers, clutches, and lid switches).

Common wear points on this style of Kenmore top-load washer

Symptom	Often involved system	Example part for this model
Agitator moves poorly or “slips”	Agitator drive	Agitator dog 80040
Won’t spin or makes grinding noises	Drive train	Coupling, clutch, drive block
Won’t drain or drains slowly	Drain system	Washer drain pump WP3363394
Won’t start or stops when lid opens	Safety interlock	Washer lid switch assembly WP8318084

Maintenance habits that extend life

• Keep loads evenly distributed; wash bulky items with similar items.
• Use the right detergent amount; excess suds can cause longer run times and extra strain.
• Periodically check hoses and connections for seepage and replace worn hoses.
• If the washer will be in a cold area, follow the winterizing guidance in the manual.
• Address new noises early; small drive issues can turn into bigger repairs.

Why it matters

A washer that is installed correctly and used within its limits runs smoother, leaks less, and puts less stress on high-wear components like the motor coupling, clutch, and drain pump. That directly impacts whether you land closer to 10 years or 15 years.

Last updated: February 2026