Owner’s manual
Error Codes
How do you find the cubic feet of a Kenmore refrigerator by model number?
For Kenmore model 10657262792, the most reliable way to get cubic feet is to look up the capacity in the specifications section of the owner's manual. If you cannot find a listed capacity, you can estimate it by measuring the interior and converting cubic inches to cubic feet.
- Check the specifications or features pages in the owner's manual.
- Look for a model and serial label inside the fresh food section (often on a side wall near drawers).
- If you have the interior measurements, calculate an estimate (see below).
- If you are comparing storage space, remember total capacity includes both refrigerator and freezer sections.
Use this when you need a quick approximation for a side-by-side refrigerator.
- Measure usable interior height, width, and depth (in inches) for:
- Refrigerator compartment
- Freezer compartment
- Multiply each compartment:
H x W x D = cubic inches - Convert to cubic feet:
cubic inches ÷ 1728 = cubic feet - Add the two compartment totals.
| What you measure | What it tells you | Tip for accuracy |
|---|---|---|
| Interior height | Vertical storage space | Measure shelf-to-shelf if shelves are fixed |
| Interior width | Side-to-side usable space | Measure between liners, not door bins |
| Interior depth | Front-to-back usable space | Exclude air vents and bulky housings |
Cubic feet helps you compare true storage capacity across Kenmore refrigerators. It also helps when planning food storage, organizing shelves and bins, and deciding whether a replacement unit will fit your household needs.
Last updated: February 2026
What are the most common problems with Kenmore refrigerators?
For Kenmore model 10657262792 side-by-side refrigerators, the most common problems are warm or no cooling, ice maker not making ice, water leaks, excess frost, doors not sealing, and unusual noises. Most fixes start with airflow, door sealing, and control settings (see the owner's manual).
- Will not run: confirm the cord is plugged in, breaker is on, and controls are not set to OFF.
- Runs too much: reduce door openings; clean condenser coils; verify controls are set correctly.
- Not cooling well: make sure vents are not blocked; listen for fan operation; clean coils.
- Ice maker not producing: freezer must be cold enough; shutoff arm down (ON); water valve open.
- Water inside/under unit: check door closure; look for drain icing; confirm defrost pan water is normal during defrost.
| Symptom | Most common cause | What we recommend |
|---|---|---|
| Warm temps | Dirty coils, blocked airflow, fan issue | Clean coils; clear vents; check fan area |
| Constant running | Doors opened often, dirty coils | Limit openings; clean coils |
| No ice | Freezer too warm, water supply off | Set colder; open valve; wait 24 hours |
| Frost buildup | Door not sealing, defrost issue | Check gasket; inspect for ice blocking vents |
- Cooling control issues: refrigerator thermostat WP2198202
- Defrost and frost complaints: refrigerator defrost bi-metal WPW10225581, refrigerator defrost timer W10822278
- Ice maker problems: ice maker assembly - refrigerator ice maker by whirlpool 4317943
- Door sealing/closing: whirlpool refrigerator door gasket, beige 2159073, refrigerator door closer cam WPW10329686
This Kenmore side-by-side relies on tight door seals and steady airflow to hold safe temperatures; small issues like dirty coils or a leaking gasket quickly lead to warm food, frost, and ice maker trouble.
Last updated: February 2026
What causes a side-by-side refrigerator to stop cooling?
On Kenmore side-by-side refrigerator model 10657262792, a “not cooling” problem is usually caused by a power or control setting issue, blocked airflow, dirty condenser coils, or a defrost-related problem that leaves frost on the evaporator. Start with the quick checks in the owner's manual.
- Confirm the power cord is firmly plugged into a working outlet.
- Check the house fuse or circuit breaker and reset if needed.
- Make sure the refrigerator control is not set to OFF.
- Verify the temperature controls are set correctly for your kitchen conditions.
- Clear packages away from air vents in both compartments so cold air can circulate.
- Push both doors fully closed and confirm they seal all the way around.
| What’s happening | Typical symptom | What to do next |
|---|---|---|
| Blocked air vents | Freezer cold, fresh food warm | Remove items blocking vents; reorganize shelves |
| Dirty condenser coils | Both sections warm; unit runs a lot | Clean coils; improve airflow around cabinet |
| Door not sealing | Warm temps, moisture, longer run time | Check gasket contact; clean and inspect sealing surfaces |
| Defrost cycle or defrost issue | Temps rise; may recover later or frost builds up | Wait 30 minutes if it just entered defrost; if heavy frost persists, troubleshoot defrost system |
If the freezer back wall is frosted over and airflow is weak, the evaporator can’t move cold air. On this model, common defrost-related parts that can contribute include the refrigerator defrost bi-metal WPW10225581 and the refrigerator defrost timer W10822278.
A side-by-side refrigerator cools by moving cold air from the freezer into the fresh food section. Anything that interrupts power, airflow, heat removal at the condenser, or automatic defrost can make the refrigerator “stop cooling” even though some components still run.
Last updated: February 2026
Where is the model number on a Kenmore side by side refrigerator?
On Kenmore side-by-side refrigerator model 10657262792, the model number is printed on the model and serial number label located on the inside refrigerator compartment side wall. The owner's manual shows this label location in the Parts and Features section.
- Open the fresh food (refrigerator) door
- Look along the inside side wall (not the back wall)
- Check near the crisper and meat drawer area
- Use a flashlight; the label can be easy to miss
- Write down both the model number and serial number for parts lookup and service
| Item on label | What it’s used for |
|---|---|
| Model number | Matching the correct parts list and diagrams |
| Serial number | Identifying production details for your unit |
| Electrical ratings | Confirming power requirements for safe servicing |
We use the exact model number to match the right Kenmore parts for your refrigerator, especially for model-specific items like the ice maker, defrost components, and door hardware. Using the wrong model number can lead to ordering parts that do not fit.
If you’re troubleshooting an ice maker issue, confirm the model number first, then match parts by model. For this model, a common replacement is the ice maker assembly - refrigerator ice maker by whirlpool 4317943.
Last updated: February 2026
