KitchenAid KTRA22ELSS01 top-mount refrigerator Parts

On a KitchenAid refrigerator like model KTRA22ELSS01, the model number is printed on the model and serial tag inside the fresh food (refrigerator) compartment, most often on a side wall near the top, on the ceiling, or around the crisper area. Check the tag first before ordering parts or scheduling service.

Common places to look (fast checklist)

• Inside the refrigerator compartment on the left or right interior wall
• On the ceiling of the refrigerator compartment near the light housing
• Around the crisper drawer frame or side trim
• Along the door liner edge (open the door and look around the inner perimeter)
• Behind the toe grille or lower front kickplate (less common)

What the tag looks like and what to write down

The label usually lists both a model number and a serial number.

What to record	Example format	Why you need it
Model number	KTRA22ELSS01	Ensures parts match your exact refrigerator configuration
Serial number	Letters and numbers	Helps identify production series and compatible revisions

Why it matters

KitchenAid refrigerators can use different door gaskets, ice maker parts, or electrical components depending on the exact model. Using the correct model number helps us match the right replacement part the first time.

Next step if you are ordering a common part

Once you confirm the model number, you can match parts such as the ice maker assembly - refrigerator ice maker by whirlpool 4317943 to your KTRA22ELSS01 parts list.

Last updated: February 2026

No. Not all KitchenAid refrigerators use an air filter; it depends on the design and features of your specific model. For the KitchenAid KTRA22ELSS01 top-mount refrigerator, the best way to confirm is to check whether your fresh food compartment has an air filter housing or cover and whether an air filter is listed in the parts for your model.

How to tell if your KTRA22ELSS01 has an air filter

Look for these common signs inside the refrigerator (fresh food) section:

• A small vented cover or grille on the rear wall near the top
• A twist-lock or snap-in filter holder labeled for an air filter
• A slot behind a small access door near the upper back wall
• An “air filter” indicator light or reset option on the control area (if equipped)

If none of these are present, your model is typically built without an air filter.

What to do if you do not have an air filter

You can still control odors and keep airflow strong with routine care:

• Keep uncovered foods sealed in containers
• Clean spills promptly (especially dairy and meat juices)
• Replace baking soda regularly if you use it for odor control
• Avoid blocking air vents with tall items or overpacked shelves
• Keep door gaskets clean so warm, humid air does not enter

For step-by-step odor control tips, use our guide: how to get rid of refrigerator smells.

Why it matters

Air filters help reduce food odors by circulating air through a filter media, but they are not required for safe cooling. What matters most for temperature stability is good airflow, tight door seals, and a working evaporator fan.

Quick comparison

Feature	Models with air filter	Models without air filter
Odor control	Better between cleanings	Relies more on cleaning and food storage
Maintenance	Filter replacement needed	No filter to replace
Common location	Rear wall near top (fresh food)	No housing present

Last updated: February 2026

You can get replacement parts for your KitchenAid KTRA22ELSS01 top-mount refrigerator by matching your model number to the parts list, then ordering the exact part you need (for example an ice maker, door gasket, or water inlet valve) from the model’s parts catalog.

How we recommend ordering parts for model KTRA22ELSS01

• Confirm the full model number on the refrigerator’s model tag: KTRA22ELSS01.
• Identify the system you’re repairing (ice maker, water dispenser, cooling, door seal, lighting).
• Use the parts list for this model to find the exact match by part name and part ID.
• Order the part and compare it to the original when it arrives (mounting points, connectors, tubing size).
• Install with power disconnected; shut off the water supply for any water-line repair.

Common replacement parts customers order for this model

Repair need	Example part on this model	What it fixes
No ice or poor ice production	Ice maker assembly - refrigerator ice maker by whirlpool 4317943	Replaces the complete ice maker assembly
Water won’t dispense or ice maker won’t fill	Refrigerator inlet valve WPW10498990	Restores water flow control into the refrigerator
Interior light stays off or won’t turn off	Refrigerator light switch W11384469	Fixes door-activated light operation
Warm fridge, noisy fan, weak airflow	Evaporator motor WPW10189703	Restores cold-air circulation

Choosing the right part the first time

• Match by model number first (KTRA22ELSS01), then by part ID.
• If multiple similar parts appear (for example, inlet valves), choose the one listed for your exact symptom and location.
• For water parts, inspect for cracks, kinks, or mineral buildup before ordering.

Why it matters

Using the exact part listed for KTRA22ELSS01 helps ensure proper fit, correct electrical connections, and reliable cooling and water/ice performance.

Last updated: February 2026

A KitchenAid KTRA22ELSS01 water dispenser usually drips or leaks because air is trapped in the water line after a filter change, the water inlet valve is seeping, or the dispenser system is not sealing fully. Purging the system and checking for slow valve seepage typically stops the leak.

Quick checks that fix most dispenser leaks

• Dispense water for 2 to 3 minutes total (in short bursts) to purge air and stabilize flow.
• If you recently changed the filter, flush it thoroughly; trapped air can cause dripping and sputtering.
• Inspect the dispenser area for cracks, a loose trim piece, or a misaligned actuator.
• Check the water line connection behind the refrigerator for moisture or mineral tracks.
• Confirm household water pressure is steady; low pressure can cause weak shutoff and dripping.

Parts to consider if purging does not stop the drip

If the dispenser continues to drip after purging, the most common cause is a water inlet valve that is not closing tightly.

• For KTRA22ELSS01, check the refrigerator inlet valve WPW10498990 first.
• If your unit uses the alternate valve configuration, compare it to the refrigerator inlet valve WP2188785.
• If you see leaking or kinks in the tubing, inspect the refrigerator water tube W10823511.

Inlet valve comparison (what to look for)

What you observe	Most likely issue	What we do next
Slow drip from dispenser even when not used	Valve seeping internally	Test/replace inlet valve
Drip happens right after filter change	Air in lines or filter not flushed	Purge water, re-seat filter
Water under/behind refrigerator	Loose fitting or damaged tube	Inspect/replace water tube

Why it matters

A small dispenser drip can turn into puddles, ice buildup in the dispenser area, or intermittent ice maker and water performance issues. Fixing the root cause also helps protect the valve, tubing, and fittings from ongoing stress.

Helpful DIY guidance

For step-by-step help on flushing after a filter change, follow how to replace the water filter in a KitchenAid refrigerator. For valve troubleshooting, use how to diagnose a faulty refrigerator water inlet valve.

Last updated: February 2026