Owner’s manual
View engine
How much does it cost to replace a riding lawn mower engine?
For a Craftsman riding tractor like model 247270560, a complete engine replacement (parts plus labor) typically runs about $260 to $1,800 installed, with labor commonly around 6 hours depending on shop rates and how much transfer work is needed. Confirm the exact engine spec and procedures in the 247270560 owner's manual.
What drives the total price
- Engine type and horsepower (OEM replacement vs. compatible engine)
- Labor rate at the repair shop (often the biggest variable)
- Extra parts needed during the swap (belts, pulleys, wiring, hardware)
- Condition of the tractor (rusted fasteners, damaged mounts, worn PTO components)
- Pickup and delivery fees (if the shop transports the mower)
Typical cost breakdown (installed)
| Cost item | Typical range | Notes |
|---|---|---|
| Replacement engine | $200 to $1,400 | Varies by brand, output, and availability |
| Labor | $200 to $600 | Often 5 to 7 hours total |
| Misc. parts and supplies | $20 to $200 | Fuel line, clamps, oil, filter, hardware |
| Total installed | $260 to $1,800 | Most jobs land in the middle of the range |
Before you replace the engine, check these common “engine problem” causes
Many no-start or poor-running complaints are maintenance-related. Our manual emphasizes safe fueling and checking oil before operation.
- Verify fresh gasoline and proper fueling practices (no spills, ventilated area)
- Check engine oil level before each use
- Inspect and service the air filter (dirty filter can cause poor running)
- Check the spark plug condition and gap
- Clear debris from cooling fins and blower housing to prevent overheating
If the engine clicks or spins but will not start, use riding lawn mower engine spins but wont start video to narrow it down before committing to an engine swap.
Why it matters
An engine replacement can cost close to the value of an older riding mower. A quick diagnosis and tune-up first often restores performance for far less than a full engine change.
Last updated: February 2026
How to look up Craftsman model number?
For Craftsman lawn tractor model 247270560, we look up the correct model number by reading the ID label on the tractor (typically on the frame under the seat or on the underside of the seat), then using that exact model number and serial number when ordering parts or checking specifications in the 247270560 operator’s manual.
Where to find the model and serial number label
On most Craftsman front-engine riding mowers and lawn tractors, the ID label is in one of these spots:
- On the frame under the seat (lift the seat to view)
- On the underside of the seat pan
- Near the rear fender area under the seat
- Occasionally on the frame rail near the rear wheels
How we recommend you “look it up” (fast and accurate)
Use this quick process so you match parts like belts, blades, and switches correctly.
- Write down the full model number exactly as shown (for example, 247270560)
- Write down the serial number exactly as shown
- If the label is dirty, wipe it gently so every digit is readable
- Use the model number to confirm the correct parts diagrams and lists
- Use the serial number when a part changes by production run
What the numbers are used for
| What you’re doing | What you need | Why it matters |
|---|---|---|
| Ordering replacement parts | Model number + sometimes serial | Prevents wrong-fit parts |
| Using maintenance schedules | Model number | Matches the correct service intervals |
| Connecting Smart Lawn features | Model number + serial | The app prompts for both to connect |
Why it matters
Craftsman operator’s manuals often cover multiple similar models, and features can vary by model. Using the exact model and serial from your tractor’s label helps us match the right drive belt, blade drive belt, blade, and safety interlock parts the first time.
Last updated: February 2026
What engine does Craftsman riding mower use?
The Craftsman riding mower model 247270560 uses a gasoline, low-emissions engine; the exact engine make and model are listed on the engine ID label and in the engine operator’s manual referenced by the tractor documentation. For the correct identification steps, use the 247270560 operator’s manual.
How to identify the exact engine on your 247270560
Use these quick checks to match the right engine parts and service specs:
- Look for the engine ID label on the engine shroud, valve cover, or blower housing.
- Record the engine model, type, and code (or spec number).
- Compare that information to the engine operator’s manual called out in the tractor manual.
- Use the tractor model number 247270560 when ordering chassis, deck, and drive parts.
- If you are troubleshooting a no-start, confirm the battery is charged and safety interlocks are engaged.
What the operator’s manual tells us (and why it matters)
The tractor manual for this Craftsman Smart Lawn Technology platform explains that it has a low emission engine and that you should read both the Craftsman Operator’s Manual and the Engine Operator’s Manual before operation. That is important because oil type, spark plug, air filter, and tune-up specs are set by the engine manufacturer.
Common engine types used on front-engine Craftsman lawn tractors
While the exact engine varies by build, most front-engine Craftsman riders in this family use a single-cylinder gasoline engine in the mid-HP range.
| What you need | Where to find it | What it’s used for |
|---|---|---|
| Engine model/type/code | Engine ID label | Correct tune-up and engine parts |
| Tractor model number (247270560) | Tractor frame tag | Correct belts, blades, deck, and chassis parts |
| Maintenance intervals | Tractor and engine manuals | Oil changes, air filter service, blade care |
Related troubleshooting help
If the engine clicks, spins, or will not crank, follow the diagnostic flow in riding lawn mower engine wont turn over or click video.
Last updated: February 2026
What model number is a Craftsman 6.75 lawn mower?
“6.75” is an engine size label used on many Craftsman walk-behind mowers; it is not the mower’s model number. The model number is printed on the mower’s product ID tag (often a 9-digit number such as 917.XXXXXX). For riding tractors, the model number is on the frame tag; this Craftsman tractor model is 247270560.
Where to find the model number
Use the product ID tag on the mower or tractor (not the engine shroud label).
- Walk-behind mower: look on the rear of the deck, near the wheel height adjuster area, or on the back of the deck housing
- Walk-behind mower: check the underside of the rear discharge door area (if equipped)
- Riding tractor: look under the seat, on the frame near the seat pan, or on the left or right frame rail
- Riding tractor: check near the rear hitch plate or rear frame crossmember
- Write down both the model number and serial number for parts matching
How to use the number once you find it
The model number is the key for getting the correct parts diagrams, blade, belt, and tune-up parts.
| What you see on the machine | What it is | Best use |
|---|---|---|
| “6.75” on the engine cover | Engine rating/series | Helps identify engine parts only |
| Model number on product ID tag | Mower/tractor identifier | Use for parts lookup and manuals |
| Serial number | Production identifier | Helps match revisions and service info |
Why it matters
Craftsman mowers that share a “6.75” engine rating can use different decks, blades, drive systems, and controls. Using the exact model number prevents ordering the wrong parts and speeds up troubleshooting.
Model-specific note for this page
If you are working on the Craftsman front-engine lawn tractor shown here, use the operator information in the 247270560 manual for identification, safe operation, and maintenance details.
Last updated: February 2026
What year is a Craftsman 247270560 riding mower?
The Craftsman riding mower model 247270560 is part of a model series covered by an operator’s manual dated November 27, 2017, so this tractor is typically from the 2017 era (or shortly after). For the exact build year, match the mower’s serial number format shown in the 247270560 operator’s manual.
How to pinpoint the exact year on your mower
We use the model number to identify the correct parts and documentation, but the serial number is what ties your specific tractor to a production date.
- Locate the model and serial number tag (commonly under the seat or on the frame near the seat pan)
- Write down the full model number (247270560) and the full serial number
- Compare the serial number format and identification guidance in the manual
- If your tractor uses Smart Lawn Technology, the app setup also uses the model and serial number
- Keep the numbers with your maintenance records for belts, blades, and battery service
What we can say from the manual (model-series evidence)
The operator’s manual that covers model numbers including 247.27056* shows a form date of November 27, 2017, and notes that the last digit of the model number can vary within the series.
| What you have | What it tells us | What to do next |
|---|---|---|
| Model number 247270560 | Identifies the correct Craftsman/MTD platform and parts family | Use it to select parts like deck blades and belts |
| Serial number | Identifies the specific production run and build date | Use the manual’s ID guidance to decode it |
| Manual form date (11/27/2017) | Confirms the model series timeframe | Treat 2017 as the baseline era |
Why it matters
The exact year affects small but important fit details such as deck configuration, belt routing, electrical interlock circuits, and Smart Lawn Technology features. Getting the year right helps ensure the correct ground drive belt, blade drive belt, and safety switch match your tractor.
Last updated: February 2026
