Owner’s manual
Error Codes
How big is the Whirlpool model ED5LHEXTD00?
The Whirlpool ED5LHEXTD00 is a full-size side-by-side refrigerator with about 25.3 cu. ft. of total capacity. For the exact exterior height, width, and depth for your specific configuration (handles, hinges, and leveling legs), use the ED5LHEXTD00 owner's manual.
Capacity and exterior dimensions are different. Here is how we recommend checking both:
- Total capacity (cu. ft.): how much food it holds
- Exterior width: helps confirm fit between cabinets
- Exterior height: includes leveling legs and hinge cover on many models
- Exterior depth: can change depending on handles and door swing clearance
- Door clearance: space needed to fully open doors and slide out bins
Most Whirlpool side-by-side refrigerators in the 25 cu. ft. class fall into these common ranges (useful for planning, then confirm in the manual):
| Measurement | Typical range | What can change it |
|---|---|---|
| Width | 32 1/2 to 36 inches | cabinet style, door design |
| Height | 65 to 71 inches | hinges, leveling legs |
| Depth | 30 to 35 inches | handles, door thickness |
- Measure the opening width at the front and back of the cabinet cutout.
- Measure height from floor to the lowest overhead cabinet or soffit.
- Measure depth from the back wall to the front edge of surrounding cabinets.
- Add at least 1 inch behind the refrigerator for airflow (more is better if the condenser area is tight).
- Plan extra space on the hinge side so doors open wide enough for drawers and shelves.
Getting the right “big” number prevents common issues like doors that cannot open fully, poor airflow that hurts cooling performance, and water line kinks behind the cabinet.
Last updated: January 2026
What's the best refrigerator side by side?
The “best” side-by-side refrigerator is the one that fits your kitchen, holds temperature steadily, and has features you will actually use. If you already own a Whirlpool ED5LHEXTD00, keeping it running well with proper airflow, correct settings, and routine maintenance often delivers the best value. See the ED5LHEXTD00 owner's manual for model-specific use and care.
- Consistent cooling: stable fresh-food temps around 37°F and freezer around 0°F.
- Simple, reliable features: in-door ice and water is convenient but adds complexity.
- Good door sealing: prevents frost, sweating, and temperature swings.
- Serviceability: common parts like a water inlet valve, ice maker, and thermostat should be accessible.
- Fit and ventilation clearance: enough space around the cabinet for airflow.
Even the best refrigerator performs poorly if it is installed too tight or in a hot spot. For the Whirlpool ED5LHEXTD00, we follow these typical clearances from the manual:
| Location | Typical clearance | Why it matters |
|---|---|---|
| Sides and top | 1/2 in. | Helps ventilation and cooling efficiency |
| Next to a fixed wall | 2 in. minimum | Allows doors to swing open |
| If you want... | Prioritize | Expect |
|---|---|---|
| Maximum reliability | Fewer dispenser features | Less to troubleshoot |
| Convenience | In-door ice/water | More parts involved (valves, ice maker, filter) |
If water taste or flow is a deciding factor, plan on routine filter changes and flushing. The ED5LHEXTD00 uses a base-grille style filter; the refrigerator water filter EDR3RXD1 is a common replacement option for this model.
Side-by-sides can last a long time when airflow is correct, doors seal tightly, and the water system is maintained. Choosing a model with the right size and the right level of features prevents most “buyer’s remorse” problems later.
Last updated: January 2026
Where is the defrost timer located on a whirlpool side by side?
On Whirlpool side-by-side refrigerator model ED5LHEXTD00, defrost timing is handled by an adaptive defrost control (electronic control) rather than a simple dial-style timer. You access it in the control area, not in the freezer compartment; use the ED5LHEXTD00 owner's manual to match the exact panel and screw locations for your build.
Instead of a round timer dial, you will typically see an electronic board with wire connectors.
- A small circuit board in a protective cover
- Multiple wiring plugs (no manual advance dial)
- Mounted with screws to a bracket or housing
- Located in the temperature control or control-board area
Disconnect power before removing any covers.
- Unplug the refrigerator or switch off the breaker
- Remove items that block the control housing area
- Remove the mounting screws for the control cover or console
- Lower the housing carefully and support it so wiring is not strained
- Reinstall covers tightly to prevent air leaks and condensation
| Defrost control type | What it looks like | Where it’s usually found on Whirlpool side-by-sides |
|---|---|---|
| Mechanical defrost timer | Small box with a dial/advance slot | Behind a control console or behind the toe grille on some older designs |
| Adaptive defrost control (electronic) | Circuit board with wire plugs | In the control housing or control-board compartment |
Knowing whether ED5LHEXTD00 uses an electronic defrost control prevents wasted time searching for a dial timer and helps you troubleshoot frost buildup, warm temperatures, and airflow complaints more accurately.
If the evaporator ices over, these parts are commonly involved:
- Defrost heater
- Defrost thermostat (bi-metal)
- Adaptive defrost control board
A common defrost-system part for this model is the refrigerator defrost bi-metal WPW10225581.
Last updated: January 2026
