Kenmore Elite 79075503204 range Parts

Kenmore Elite range model 79075503204 does not use a single, dedicated “reset” button. For most control glitches, we reset the range by turning power off at the breaker (or unplugging) briefly, then restoring power and resetting the clock as needed; see the 79075503204 owner's manual.

How to reset a Kenmore Elite 79075503204 range

1. Turn the range OFF.
2. Switch the range circuit breaker OFF (or unplug the power cord if accessible).
3. Wait 2 to 5 minutes.
4. Restore power.
5. Set the clock and re-try the function.

Quick checklist (before and after the reset)

• Confirm the display is fully dark before restoring power.
• If the control is unresponsive, try a longer power-off time (up to 10 minutes).
• Re-enter cooking settings (Bake, Broil, Convection) after power returns.
• If the oven light or other features were recently serviced, verify wiring is fully seated.
• If a breaker trips again, stop and inspect for a wiring or terminal issue.

When a “reset” is not enough

A reset clears many temporary electronic control issues, but it will not fix a failed component. These parts are common suspects when symptoms persist:

Symptom	What to check next	Common part to test/replace
Oven temperature seems wrong	Sensor circuit and calibration steps	Frigidaire range oven temperature sensor 316217002
Oven will not heat	Heating circuit, element continuity	Bake element 318255201
Display dead or intermittent	Power supply connections at rear	Terminal block and cord connections

Why it matters

Power-cycling is the safest “reset” for the electronic oven control because it reboots the control board without changing cooking calibration. If the issue returns quickly, testing the temperature sensor, bake element, or power connections helps you move from guessing to a targeted repair.

Last updated: February 2026

Your Kenmore Elite model 79075503204 is an Elite range, not a washer, so it does not have a washer tub capacity measured in cubic feet. For this appliance, the useful “capacity” spec is the oven cavity size, which we list in the 79075503204 owner’s manual specifications section.

How to confirm what appliance you have

We recommend matching the model number on the ID plate to ensure you are looking up the right specs and parts.

• Open the oven door and look along the front frame for the identification plate
• If you do not see it there, check inside the storage drawer area along the side of the frame
• Confirm the full model number is 79075503204
• Use that exact model number when ordering Kenmore parts like an oven rack or bake element

Where “cubic feet” applies on this model

On ranges like the Kenmore Elite 79075503204, cubic feet typically refers to oven capacity, not a washer drum.

Appliance type	Capacity spec you’ll see	Typical unit
Washer	Wash basket volume	Cubic feet
Range (this model)	Oven cavity volume	Cubic feet
Range	Cooktop size	Inches (width)

Related parts customers often replace

If you are troubleshooting performance (dim oven light, uneven baking, temperature issues), these common parts can help.

• Range oven light bulb 316538904 (interior oven light)
• Frigidaire range oven temperature sensor 316217002 (helps regulate oven temperature)
• Bake element 318255201 (primary heat source for baking)

Why it matters

Using the correct model type prevents ordering the wrong parts and chasing the wrong specification. A range’s oven capacity and heating components (sensor, bake element, control) affect baking results far more than any “washer-style” cubic feet rating.

Last updated: February 2026

Yes. Kenmore Elite is Kenmore’s higher-end line, and the Kenmore Elite range model 79075503204 is built to deliver more premium features and styling than standard Kenmore models, while still staying in a practical, repairable mid-to-high tier. For model-specific features and care details, use the 79075503204 owner's manual.

What “high end” means for Kenmore Elite ranges

Kenmore Elite typically focuses on upgrades you notice in daily cooking and ownership:

• More cooking modes (bake, broil, and often convection depending on configuration)
• More precise temperature control and better heat distribution
• Heavier-duty knobs, handles, and door hardware
• More refined finishes and design details
• Better accessory support (racks, pans, trim pieces) compared to entry models

How to judge your specific model (79075503204)

Even within Kenmore Elite, “high end” depends on the exact configuration and condition. We recommend checking these areas first:

• Oven performance: preheat time, temperature stability, and even browning
• Broil performance: element glow and searing ability
• Wear items: door seal condition, racks, and light operation
• Control response: knob feel, indicator lights, and consistent cycling
• Installation quality: correct leveling and secure electrical connection

Quick comparison: where Kenmore Elite usually sits

Line	Typical positioning	What you usually get
Kenmore (standard)	Value focused	Core features, simpler controls
Kenmore Elite	Mid-to-high end	More features, upgraded design, stronger cooking performance
True luxury brands	Premium/luxury	Highest-end materials, specialized features, higher cost

Why it matters

Knowing the tier helps you decide whether to repair or replace. Higher-end ranges often justify replacing key parts (like an oven sensor or bake element) because the cabinet, insulation, and overall build are designed for long-term use.

Last updated: February 2026

On Kenmore Elite range model 79075503204, the model and serial number are printed on an identification plate that’s easiest to see with the oven door open or by pulling out the storage drawer and checking the drawer side frame. Use the exact model number when ordering parts or service. See the 79075503204 owner’s manual for the label locations.

Common places to check on model 79075503204

Look in these spots first (they match the typical label locations called out for this range):

• Front frame of the range, visible when the oven door is open
• Inside the storage drawer area, along the side of the frame
• Drawer side frame (serial plate location)
• Back of the range near the vent area (less common, but worth a quick check)

Quick steps to find it fast

• Turn the oven light on and use a flashlight to read the plate clearly.
• Open the oven door and scan the front frame on both left and right sides.
• Pull the bottom storage drawer out fully and check the side frame rails.
• Write down model, serial, and any lot number/letter shown.

What to write down (and why)

What you’ll see	Example format	Why we ask for it
Model number	790.75503 (series) / 79075503204 (full)	Ensures the correct diagrams and parts list
Serial number	Letters and numbers	Helps match production changes
Lot number/letter	Single letter or code	Helps confirm the exact version

Why it matters

Kenmore Elite ranges can have multiple versions within the same series. Using the full model number 79075503204 helps us match the correct parts (like a bake element, oven temperature sensor, or control panel) and avoid ordering a part that looks right but does not fit.

Last updated: February 2026

If your Kenmore Elite range model 79075503204 is not working, the most common causes are a power supply problem, an incomplete installation connection, or a control fault (beeping with an F-code). Start by confirming the range has power, then check for any error codes and basic burner-ignition issues.

Quick checks (most common fixes)

• Make sure the power cord/plug is fully seated in the outlet.
• Check your home breaker or fuses; a partial trip can leave the range “dead” or partly working.
• If there was a power outage, turn the oven controls OFF and restart after power is stable.
• If the control is beeping and shows F1, F3, or F9, press CLEAR to stop the beeping; if the code returns, record it.
• If surface burners will not light, push in and turn the knob fully to LITE until ignition, then adjust flame.
• If flames are weak or uneven, clean clogged burner ports and re-try ignition.

What “not working” usually means (symptom guide)

Symptom	Most likely cause	What to do first
Entire range is dead	No power, loose plug, wiring not complete	Verify outlet power and breaker; review installation guide
Control beeps with F1/F3/F9	Electronic control fault detected	Press CLEAR; if it recurs, record code and service
Surface burners do not light	Knob not fully on LITE, clogged ports	Use LITE correctly; clean burner ports
Oven light does not work	Bulb loose or burned out	Replace the bulb with range oven light bulb 316538904

Why it matters

A range can fail in different ways depending on whether the issue is power, controls, or gas ignition. Doing the quick checks above prevents unnecessary part replacement and helps you pinpoint whether you need a simple reset, cleaning, or a repair.

When to stop and get service

• You smell gas, hear hissing, or suspect a gas leak.
• The breaker trips repeatedly when the range is used.
• An F-code returns after pressing CLEAR.

For model-specific operating steps and safety notes, use the 79075503204 owner’s manual.

Last updated: February 2026