Kenmore 66517363301 undercounter dishwasher Parts

Yes. We still carry replacement parts for many Kenmore dishwashers, including model 66517363301, as long as the part is still manufactured and available. The key is matching the exact model number so you get the correct fit for items like the heater, door seal, drain hose, or inlet valve.

How to make sure you order the right part

Use the model-specific diagrams and part lists in the 66517363301 owner's manual to confirm the part location and name before ordering.

• Match the full model number: 66517363301 (not just “665”)
• Compare the part name and part ID, not only the description
• Check symptoms first (leak, no heat, not draining) so you replace the right component
• Inspect for simple issues (clogs, loose connections, damaged seals) before buying parts
• If multiple versions exist, verify by the diagram callout and your dishwasher’s configuration

Common Kenmore dishwasher parts people still replace

These are frequently replaced items for this model when symptoms point to them:

• Heating problems: dishwasher heater W10518394
• Leaks at the door: dishwasher door seal W10542314
• Not draining or slow drain: dishwasher drain hose 8269144A
• No fill or weak fill: dishwasher water inlet valve WP8531669
• No power or intermittent power: fuse 8193762

Quick symptom-to-part guide

Symptom	Most likely area	Example part for 66517363301
Dishes not drying, water stays cool	Heating circuit	Heater, thermostat
Water on floor at front	Door sealing	Door seal
Standing water in tub	Drain path	Drain hose
Dishwasher won’t fill	Water supply	Inlet valve

Why it matters

Kenmore dishwashers are designed for years of dependable operation, but normal wear items (seals, hoses, heaters) eventually fail. Using the correct model-matched part helps prevent repeat leaks, poor cleaning, and unnecessary returns.

Last updated: February 2026

Your Kenmore dishwasher’s model number is printed on the model and serial number label inside the door area. On model 66517363301, that label is typically on the inner door frame or along the tub opening; match the full number exactly before ordering parts or troubleshooting.

Where to look first (fastest checks)

• Open the dishwasher door and look along the inner door frame.
• Check the top edge of the door (near the latch area).
• Look on the tub wall near the front opening.
• Wipe the area with a damp cloth; soap film can hide the print.
• Write down both the model and serial numbers for service and parts matching.

What the label looks like

Most Kenmore undercounter dishwashers use a sticker or metal plate that lists:

• Model number (example: 66517363301)
• Serial number
• Electrical ratings (volts/amps)

The parts and features section in the 66517363301 owner's manual calls out the model and serial number label as a built-in feature, which is why checking the door opening area is the best starting point.

If you still cannot find it

Use these next-best locations:

• Behind the toe panel at the bottom front (some installations make the label easier to see from below)
• On the side of the tub near the front legs
• In your paperwork: the 66517363301 installation guide often gets stored with purchase or install documents

Why it matters

Kenmore model numbers control the exact fit for key items like the heating circuit, door sealing, and water fill components. Even small model differences can change which dishwasher heater, door seal, or water inlet valve fits correctly.

What you’re doing	What to use	Why
Ordering replacement parts	Exact model number	Ensures correct fit and wiring/connector match
Troubleshooting symptoms	Model + serial	Helps narrow down configuration differences
Scheduling service	Model + serial	Speeds up diagnosis and parts lookup

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 66517363301 is worth it when the fix is a normal wear item (seal, hose, valve, heater) and the total repair cost stays well below the price of a comparable replacement. It is also worth repairing when the issue is covered by the warranty terms listed in the 66517363301 owner's manual.

Quick way we decide: repair vs replace

We use these practical checkpoints:

• Repair when the problem is a leak, no-heat, or no-fill caused by a single part (seal, hose, inlet valve, heater).
• Repair when the tub and inner door panel are in good shape and the dishwasher cleans well once fixed.
• Repair when you can DIY safely (basic hand tools, careful shutoff of power and water).
• Replace when multiple major systems are failing (wash motor plus leaks plus electrical issues).
• Replace when the repair estimate approaches the cost of a new unit.

Common repairs on 66517363301 and what they usually mean

Symptom	Likely area	Example part for this model
Water on floor at the door	Door sealing	Dishwasher door seal W10542314
Not draining or slow drain	Drain path	Dishwasher drain hose 8269144A
Not filling or fills slowly	Water supply	Dishwasher water inlet valve WP8531669
Dishes not drying, water stays cool	Heating circuit	Dishwasher heater W10518394

Warranty and coverage considerations

For model 66517363301, the manual describes warranty coverage that can make repair the clear choice, including:

• One-year full warranty on the dishwasher when installed and operated as instructed.
• Two-year coverage on the electronic control and power supply board.
• Limited two-year coverage on parts of the wash system (motor, pump, spray arms, feed tube, seals, gaskets).

Check the exact terms and dates in the 66517363301 owner's manual and keep your proof of purchase handy.

Why it matters

A targeted repair (like replacing a door seal, drain hose, or inlet valve) often restores cleaning and leak protection for a fraction of replacement cost, and it avoids the extra work of uninstalling and fitting a new undercounter dishwasher.

Last updated: February 2026