Frigidaire FRS3R5EMB5 refrigerator Parts

Most Frigidaire refrigerators, including the Frigidaire FRS3R5EMB5 side-by-side, do not use one universal “reset button” for the whole unit; resets are usually feature-specific. For example, the water filter indicator resets by pressing and holding the FILTER RESET touch pad for 10 to 15 seconds (after changing the filter).

What you can reset on the FRS3R5EMB5

Here are the most common “reset” actions customers mean on this model:

• Water filter status light: press and hold FILTER RESET for 10 to 15 seconds after replacing the filter
• Dispenser lockout: press and hold LOCK for 3 to 5 seconds to lock or unlock
• Control glitch (basic power reset): unplug the refrigerator (or switch off the breaker) for about 2 minutes, then restore power
• Cooling performance after power loss: allow 8 to 12 hours for temperatures to pull down after power is restored

For the exact button locations and indicator behavior, use the owner's manual.

Water filter reset steps (common “reset button” request)

If your “reset” question is really about the filter light:

1. Replace the filter.
2. Press and hold FILTER RESET for 10 to 15 seconds.
3. Watch for the indicator lights to flash, confirming the reset.

If you need the correct replacement filter for this model, use the refrigerator filter WFCB.

Quick guide: which reset to use

What you want to fix	What to do	What to expect
Filter light stays red/amber	Hold FILTER RESET 10 to 15 sec	Lights flash, then return to normal status
Dispenser won’t dispense	Hold LOCK 3 to 5 sec	Lock light turns off, dispenser works
Display acting odd	Power reset (off 2 min)	Controls reboot
Not cold enough after outage	Wait 8 to 12 hours	Temps stabilize gradually

Why it matters

Using the right reset saves time and prevents unnecessary parts replacement. A filter light reset is normal maintenance, while cooling or dispenser issues often point to settings, lockout mode, airflow, or door sealing.

Last updated: February 2026

For your Frigidaire refrigerator, the model number is printed on the serial plate (rating label) located inside the refrigerator compartment. On the FRS3R5EMB5, we use that model number to match the correct parts list, diagrams, and repair instructions in the FRS3R5EMB5 owner's manual.

Where to find the model number label

In most Frigidaire side-by-side refrigerators like model FRS3R5EMB5, the serial plate is inside the fresh food (refrigerator) section. Check these common spots:

• On a side wall near the top front
• On a side wall behind the crisper drawers
• On the ceiling of the refrigerator compartment
• Along the door frame (hinge side) when the door is open

What to write down (so parts match)

We recommend copying the information exactly as shown on the label:

• Model number (example: FRS3R5EMB5)
• Serial number
• Purchase date (if listed or known)
• Any letter suffixes after the model number (they can affect part fit)

Quick check: model number vs. serial number

Use this as a simple guide when you are looking at the label.

Item on label	What it’s used for	Why it matters
Model number	Identifies the exact refrigerator design	Ensures the right parts and diagrams for your unit
Serial number	Identifies your specific production unit	Helps confirm version and manufacturing details

Why it matters

Frigidaire often uses similar-looking cabinets across multiple models, but internal components (ice maker, water filter housing, temperature control, door parts) can differ. Using the exact model number prevents ordering the wrong replacement part.

Next step once you find it

After you confirm the model number, you can order replacement parts from the parts list for your refrigerator, or search by model on Sears PartsDirect.

Last updated: February 2026

On a Frigidaire FRS3R5EMB5 side-by-side refrigerator, the 5Y and CE code points to a communication problem between electronic controls (a control board is not “talking” correctly to another board or component). Start with a power reset and wiring checks; if the code returns, a control repair is typically needed (see the owner's manual).

What to do first (safe, quick checks)

• Unplug the refrigerator (or switch off the breaker) for 5 minutes.
• Restore power and wait 10 minutes to see if the code clears.
• Confirm the outlet is grounded and not on an extension cord.
• Check that the unit is not in the middle of a normal defrost cycle (brief changes in operation can be normal).
• If the display returns to 5Y/CE, plan for an internal electrical inspection.

What usually causes 5Y/CE

This code is most often triggered by one of these issues:

• Loose or oxidized wire connector at a control board
• Pinched or damaged wiring harness (often near hinges or the machine compartment)
• Moisture intrusion at a connector
• Failed electronic control board

Quick decision guide

Situation	What it means	Best next step
Code clears after reset	Temporary glitch or brief power issue	Monitor for 24 to 48 hours
Code returns quickly	Ongoing communication fault	Inspect harness and connectors
Cooling or dispenser acts erratic	Control signal problem affecting operation	Schedule a qualified service diagnosis

Why it matters

A communication error can interrupt normal cooling logic, defrost timing, and dispenser functions. Addressing it early helps prevent temperature swings that can lead to food spoilage and ice maker or water dispenser problems.

Parts and service notes

If diagnosis points to a failed component, we recommend matching parts by model number (FRS3R5EMB5) and the exact part listing. You can also search by model on Sears PartsDirect to find the correct control and wiring-related parts for your refrigerator.

Last updated: February 2026