Owner’s manual
Error Codes
How to get the bottom shelf out of a Samsung refrigerator?
To remove the bottom shelf in your Samsung RF266AEBP refrigerator, we lift the front edge of the glass shelf to release it from the rear supports, then angle it and slide it out through the door opening. Use the steps in the RF266AEBP owner's manual for your exact shelf style.
Steps to remove the bottom glass shelf
- Remove food and bins that block the shelf.
- Grip the shelf with both hands near the front corners.
- Lift the front edge up to disengage the shelf from the side rails or rear supports.
- If your shelf has retaining clips, press the clips inward while lifting.
- Angle one side down slightly and slide the shelf out.
Quick tips that prevent cracks
- Support the glass with two hands; do not lift by the trim only.
- Pull the refrigerator doors fully open so the shelf clears the gasket.
- If it binds, lift higher first, then slide; forcing it can chip the glass.
- Set the shelf on a towel or flat surface after removal.
If the shelf will not lift out
Most “stuck shelf” issues come from ice buildup, misaligned rails, or a bin pressing upward on the glass.
- Check for frost or ice at the back wall; let it thaw with doors open for 10 to 20 minutes.
- Verify nothing is wedged under the shelf (deli drawer lid, crisper frame, tall items).
- Inspect the shelf supports; a broken end cap can hold the shelf in place.
- If the shelf is cracked or the frame is warped, replace the shelf rather than reinstalling it.
| Symptom | Most common cause | What we do first |
|---|---|---|
| Shelf won’t lift at the front | Retaining clip still engaged | Press clips, then lift |
| Shelf lifts but won’t slide out | Door not open far enough, gasket interference | Open doors fully, angle shelf |
| Shelf feels glued in back | Frost/ice at rear supports | Thaw, then retry |
Why it matters
Removing the shelf the right way protects the glass, keeps the shelf supports from snapping, and helps you clean spills that can cause odors and sticky drawer movement.
Last updated: February 2026
What is the capacity of the Samsung RF266AEBP?
The Samsung RF266AEBP bottom-mount refrigerator has a total capacity of about 25.8 cu. ft. Use this number to compare storage space across similar Samsung French door models and to estimate how much fresh and frozen food the compartments can hold. See the RF266AEBP owner's manual for model-specific details.
What “total capacity” means
Total capacity is the combined volume of the refrigerator and freezer sections.
- It is measured in cubic feet (cu. ft.).
- It is a storage-volume rating, not a shelf-by-shelf usable space guarantee.
- Door bins, drawers, and ice maker components can reduce usable space.
- Food packaging shapes and shelf layout affect how much you can actually fit.
Quick reference
| Spec | Value |
|---|---|
| Model | RF266AEBP |
| Brand | Samsung |
| Refrigerator type | Bottom-mount (French door style) |
| Total capacity | 25.8 cu. ft. |
Why it matters
Capacity helps you choose the right refrigerator size for your household, plan grocery storage, and compare models fairly. If you are troubleshooting temperature or airflow issues, knowing the model and size also helps when matching parts like a temperature sensor or condenser fan.
Related parts that affect usable space (not capacity)
If shelves, drawers, or door sealing issues are making the refrigerator feel “smaller,” these model-compatible parts are common fixes:
- Refrigerator shelf support end cap DA61-04809A (stabilizes shelf mounting)
- Refrigerator shelf DA97-07015A (replaces a cracked or missing shelf)
- Refrigerator gasket assembly DA97-07192B (helps the door seal properly)
Last updated: February 2026
How to tell if a Samsung fridge compressor is bad?
A bad compressor in your Samsung RF266AEBP refrigerator usually shows up as poor cooling with the unit running constantly, clicking or buzzing near the back, or repeated shutdowns from overheating. Confirm the basics first (power, airflow, condenser cleanliness) before replacing major sealed-system parts.
Quick checks we recommend first
- Verify the refrigerator is plugged in firmly and the outlet is working.
- Make sure the condenser area is not packed with dust and lint.
- Confirm the condenser fan is running when the compressor is trying to run.
- Check that doors close fully and gaskets seal all the way around.
- Listen for repeated clicking every few minutes (often a start/overload issue).
What the symptoms usually mean
| Symptom | Most common cause | What to check next |
|---|---|---|
| Runs a lot but not cold | Weak compressor or sealed-system issue | Coils, airflow, door sealing, temps |
| Clicks, then stops | Overload protector or start device tripping | Overheating, power, start components |
| Very hot compressor shell | Poor ventilation or failing compressor | Fan operation, dust buildup |
| Buzzing/humming then silence | Compressor struggling to start | Overload protector, wiring |
Parts that can be involved on this model
On the RF266AEBP, compressor complaints are often tied to the start/overload side or airflow around the machine compartment.
- Refrigerator compressor MKV190CL2JSM1 (the compressor itself)
- Refrigerator compressor overload protector DA34-00004D (can trip if the compressor overheats or can’t start)
- Refrigerator condenser fan DA31-00146B (poor airflow can overheat the compressor)
Why it matters
A compressor is part of the sealed cooling system; misdiagnosing it can lead to unnecessary cost. Ruling out airflow, dirty coils, and start/overload problems first helps you target the real failure and restore proper refrigerator temperature faster.
For model-specific operating details and temperature recommendations, use the RF266AEBP owner’s manual.
Last updated: February 2026
