Installation guide
Owner’s manual
Error Codes
Where can I find my Kenmore electric range model number?
On Kenmore electric range model 79096123408, the model and serial number are printed on the appliance identification (serial) plate. For this model, the plate is on the right side of the oven front frame, inside the storage drawer or warmer drawer compartment; pull the drawer out and look along the right-side frame. See the 79096123408 owner's manual for the illustration.
Quick steps to find the ID plate
- Turn the oven off and let it cool.
- Pull the storage drawer or warmer drawer straight out.
- Look on the right-side vertical front frame behind the drawer.
- Use a flashlight; the plate can be tucked back from the front edge.
- Write down the full model number and serial number.
- Take a clear photo so you can zoom in when ordering parts.
What to record (and how it should look)
| Item | What you’ll see | Example |
|---|---|---|
| Model number | A full number string | 79096123408 |
| Serial number | Letters and numbers | Varies by unit |
Why it matters
Kenmore 790-series ranges share many design features, but parts can still vary by exact model. Using the ID plate helps us match the correct diagrams and replacement parts (surface element control switch, radiant surface element, bake element, door components) for 79096123408.
Last updated: February 2026
Why is my Kenmore electric oven not working?
If your Kenmore electric range model 79096123408 is not working, the most common causes are a power supply problem (outlet, cord, or house breaker) or the electronic control detecting a fault and stopping operation. Start with power checks, then clear any displayed error and retest using the steps in the 79096123408 owner's manual.
Quick checks we recommend first
- Confirm the range is plugged in fully and the cord is not damaged.
- Check the home breaker; many electric ranges use a 2-pole breaker that can trip partially.
- If the display is blank, verify the outlet has power.
- If the control is beeping and shows an F code, press STOP/CLEAR to clear it and try Bake again.
- If the oven will not heat but the cooktop works, focus on oven heating components and controls.
What the symptoms usually mean
| What you see | Most likely cause | What to do next |
|---|---|---|
| Entire range dead (no lights, no display) | Power supply issue | Check breaker, outlet power, cord connection |
| Control beeps and shows an F code | Control detected a fault | Press STOP/CLEAR; if it returns, troubleshoot the code |
| Cooktop works but oven will not heat | Failed heating circuit (element, wiring, control) | Inspect and test bake/broil heating path |
| Works after outage, then acts odd | Settings lost after power interruption | Reset clock and oven function |
Parts that commonly fix “oven not working” on this model
If your diagnosis points to a failed control or heating circuit, these model-matched parts are commonly involved:
- Element 316407501 (bake heating element)
- Frigidaire range broil element 316203301 (broil heating element)
- Harness 316416873 (wiring connections feeding elements and controls)
Why it matters
An electric range can appear “broken” when it is actually in a fault state (F code) or missing full 240V power. Doing the power and control reset checks first prevents unnecessary part replacement and gets you to the right repair faster.
Helpful DIY references
- Use the Kenmore 790 range 4-digit error codes guide to match the exact F code to the next repair step.
Last updated: February 2026
What is the average lifespan of 79096123408?
A Kenmore electric range like model 79096123408 typically lasts 13 to 15 years with normal household use. Lifespan depends most on heat exposure, cleaning habits, and whether key heating and control parts are kept in good working order; see the 79096123408 owner's manual for care and operating guidance.
What affects lifespan most
- Heating element wear from frequent high-heat baking and broiling
- Surface element cycling and heavy cookware use on radiant elements
- Door seal condition (heat loss makes the oven work harder)
- Electrical connection quality at the terminal block and wiring
- Cleaning and ventilation (grease buildup can stress components)
Typical lifespan by component (what to expect)
| Component | Typical service life | Common symptom when failing |
|---|---|---|
| Radiant surface element | 5 to 10 years | Burner not heating or heats unevenly |
| Control switch/knob | 7 to 12 years | Burner won’t regulate heat, stuck on high |
| Oven door seal | 5 to 10 years | Longer preheat, uneven baking |
| Terminal block/power cord connection | 10+ years | Intermittent power, burning smell at rear |
Maintenance that helps you reach 13 to 15 years
- Keep the cooktop clean so spills do not bake onto radiant elements.
- Avoid slamming the oven door; it protects hinges, latch, and glass.
- Confirm the range is level; use the leveling legs so the door seals evenly.
- Do not line the oven bottom with foil; it can trap heat and damage panels.
- If you notice arcing, burning odor, or flickering power, stop using the range and inspect the power connection.
Why it matters
Most “short lifespan” complaints come from heat loss (bad sealing/leveling) or electrical stress (loose connections). Catching those early helps the oven maintain temperature accurately and reduces strain on elements and controls.
Last updated: March 2026
