Kenmore 79096123408 electric range Parts

On Kenmore electric range model 79096123408, the model and serial number are printed on the appliance identification (serial) plate. For this model, the plate is on the right side of the oven front frame, inside the storage drawer or warmer drawer compartment; pull the drawer out and look along the right-side frame. See the 79096123408 owner's manual for the illustration.

Quick steps to find the ID plate

• Turn the oven off and let it cool.
• Pull the storage drawer or warmer drawer straight out.
• Look on the right-side vertical front frame behind the drawer.
• Use a flashlight; the plate can be tucked back from the front edge.
• Write down the full model number and serial number.
• Take a clear photo so you can zoom in when ordering parts.

What to record (and how it should look)

Item	What you’ll see	Example
Model number	A full number string	79096123408
Serial number	Letters and numbers	Varies by unit

Why it matters

Kenmore 790-series ranges share many design features, but parts can still vary by exact model. Using the ID plate helps us match the correct diagrams and replacement parts (surface element control switch, radiant surface element, bake element, door components) for 79096123408.

Last updated: February 2026

If your Kenmore electric range model 79096123408 is not working, the most common causes are a power supply problem (outlet, cord, or house breaker) or the electronic control detecting a fault and stopping operation. Start with power checks, then clear any displayed error and retest using the steps in the 79096123408 owner's manual.

Quick checks we recommend first

• Confirm the range is plugged in fully and the cord is not damaged.
• Check the home breaker; many electric ranges use a 2-pole breaker that can trip partially.
• If the display is blank, verify the outlet has power.
• If the control is beeping and shows an F code, press STOP/CLEAR to clear it and try Bake again.
• If the oven will not heat but the cooktop works, focus on oven heating components and controls.

What the symptoms usually mean

What you see	Most likely cause	What to do next
Entire range dead (no lights, no display)	Power supply issue	Check breaker, outlet power, cord connection
Control beeps and shows an F code	Control detected a fault	Press STOP/CLEAR; if it returns, troubleshoot the code
Cooktop works but oven will not heat	Failed heating circuit (element, wiring, control)	Inspect and test bake/broil heating path
Works after outage, then acts odd	Settings lost after power interruption	Reset clock and oven function

Parts that commonly fix “oven not working” on this model

If your diagnosis points to a failed control or heating circuit, these model-matched parts are commonly involved:

• Element 316407501 (bake heating element)
• Frigidaire range broil element 316203301 (broil heating element)
• Harness 316416873 (wiring connections feeding elements and controls)

Why it matters

An electric range can appear “broken” when it is actually in a fault state (F code) or missing full 240V power. Doing the power and control reset checks first prevents unnecessary part replacement and gets you to the right repair faster.

Helpful DIY references

• Use the Kenmore 790 range 4-digit error codes guide to match the exact F code to the next repair step.

Last updated: February 2026

A Kenmore electric range like model 79096123408 typically lasts 13 to 15 years with normal household use. Lifespan depends most on heat exposure, cleaning habits, and whether key heating and control parts are kept in good working order; see the 79096123408 owner's manual for care and operating guidance.

What affects lifespan most

• Heating element wear from frequent high-heat baking and broiling
• Surface element cycling and heavy cookware use on radiant elements
• Door seal condition (heat loss makes the oven work harder)
• Electrical connection quality at the terminal block and wiring
• Cleaning and ventilation (grease buildup can stress components)

Typical lifespan by component (what to expect)

Component	Typical service life	Common symptom when failing
Radiant surface element	5 to 10 years	Burner not heating or heats unevenly
Control switch/knob	7 to 12 years	Burner won’t regulate heat, stuck on high
Oven door seal	5 to 10 years	Longer preheat, uneven baking
Terminal block/power cord connection	10+ years	Intermittent power, burning smell at rear

Maintenance that helps you reach 13 to 15 years

• Keep the cooktop clean so spills do not bake onto radiant elements.
• Avoid slamming the oven door; it protects hinges, latch, and glass.
• Confirm the range is level; use the leveling legs so the door seals evenly.
• Do not line the oven bottom with foil; it can trap heat and damage panels.
• If you notice arcing, burning odor, or flickering power, stop using the range and inspect the power connection.

Why it matters

Most “short lifespan” complaints come from heat loss (bad sealing/leveling) or electrical stress (loose connections). Catching those early helps the oven maintain temperature accurately and reduces strain on elements and controls.

Last updated: March 2026