Craftsman 247374900 lawn mower Parts

On a Craftsman walk-behind mower like model 247374900, the serial number format depends on the engine and deck manufacturer, so we use the identification chart in the 247374900 owner's manual to match the serial tag style and decode the build date correctly.

Most walk-behind mowers have more than one ID label. Check these common spots:

• Rear of the deck housing near the discharge opening
• Top of the deck near the engine mounting area
• Rear skirt area (behind the engine)
• Handle bracket or height-adjuster area
• Engine label (often separate from the mower deck label)

Many Craftsman and MTD-built mower serials use a date-style code, but the order is not universal. A common pattern you may see is MMDDYY (month, day, year). Example: 072811 reads as July 28, 2011.

Use this quick check to avoid misreading the code:

1. Locate the mower deck serial label and write it down exactly.
2. Locate the engine model and serial (these can decode differently than the deck).
3. Compare the label format to the ID section in the 247374900 owner's manual.
4. If you are ordering parts, match parts to the mower model 247374900 first; use the engine numbers only for engine-specific parts (spark plug, air filter, carburetor items).

The serial number helps confirm the correct production run, which can affect fit for items like the drive system, handle hardware, and deck components. It is especially important when replacing wear parts such as the lawn mower ground drive belt 954-04282.

Last updated: February 2026

For a Craftsman walk-behind mower like model 247374900, it’s cheaper to repair when the fix is routine and the total repair cost stays under about 50% of the price of a comparable new mower. Replacing makes more sense when you’re facing major drivetrain or engine costs, repeated breakdowns, or heavy deck damage.

• Repair if the mower starts reliably and the issue is wear-and-tear (blade, belt, cable, wheel).
• Repair if parts cost is low and labor is minimal (DIY-friendly).
• Replace if the engine has low compression, severe smoking, or won’t run even after a tune-up.
• Replace if the self-propel system needs multiple major parts (belt plus transmission) and the total climbs quickly.
• Replace if the deck housing is rusted through or cracked.

These are typical “high value” repairs because they restore performance without major teardown:

• Replace a worn drive belt: lawn mower ground drive belt 954-04282
• Fix self-propel engagement issues by replacing a stretched cable: lawn mower drive control cable 946-05048
• Replace a damaged wheel to improve tracking and cut quality: lawn mower wheel 934-04699

A walk-behind mower’s best value comes from keeping the engine healthy and the deck solid. When the deck and engine are sound, replacing wear parts (belt, cable, wheels) usually costs far less than buying a new mower and gets you back to reliable mowing.

Use the 247374900 owner’s manual to confirm maintenance intervals, adjustment points, and the correct setup for bagging, mulching, and side discharge.

Last updated: February 2026

Common problems we see on Craftsman walk-behind mowers like model 247374900 include hard starting or stalling, poor cut quality, excessive vibration, and self-propel drive issues (slipping or not moving). Most of these trace back to routine wear items such as the blade system, belts/cables, and deck discharge components; use the 247374900 owner's manual for model-specific checks and adjustments.

• Won’t start / starts then dies: old fuel, dirty carburetor, fouled spark plug, clogged air filter
• Mower won’t move (self-propel): worn or stretched drive belt, loose drive cable, transmission wear
• Poor cut quality: dull/bent blade, damaged blade adapter, deck packed with wet grass
• Excessive vibration: bent blade, loose blade hardware, cracked blade adapter
• Clumping or poor discharge: clogged deck, damaged chute/door, missing or broken deflector

1. Disconnect the spark plug wire before working near the blade.
2. Confirm fresh fuel and correct oil level.
3. Inspect the underside of the deck for packed grass and clean it.
4. Check the blade for bends, cracks, or severe dullness.
5. If self-propelled, inspect the belt and cable for slack and wear.

• For blade service and safe removal: how to sharpen a lawn mower blade
• If the mower will not drive: lawn mower wont move troubleshooting video motion drive failure

Catching a worn belt, loose blade adapter, or clogged deck early prevents bigger damage to the deck housing, transmission, and crankshaft, and it restores safe operation and clean cutting.

Last updated: February 2026

The model number for this Craftsman walk-behind gas lawn mower is 247374900. You will typically find this number on the mower’s model tag (often near the rear deck area, under the handle, or on the side of the deck); match it exactly when ordering parts or looking up diagrams in the 247374900 owner's manual.

Check these common locations on Craftsman walk-behind mowers:

• Rear of the deck near the height adjusters
• Under the handle mounting area
• Side of the deck near the discharge opening
• On a sticker or metal plate with both model and serial numbers

Craftsman model numbers can look similar, but parts can differ by deck design, drive system, and handle hardware. Using 247374900 helps us match the correct diagrams and parts such as the drive belt, chute components, and handle parts.

Before you place an order, we recommend:

• Confirm the model tag reads 247374900 (no extra digits)
• Record the serial number (helps with production variations)
• Identify the system you’re repairing (drive, deck, discharge, handle)
• Compare the part description to your mower’s configuration (bagging vs mulching vs side discharge)

The model number is the key to getting the right Craftsman mower parts the first time; it prevents mismatches that can cause fit issues, poor cutting performance, or drive problems.

Last updated: February 2026

The model number for this Craftsman walk-behind lawn mower is 247374900. You’ll find it on the mower’s model tag; matching that number ensures you get the correct Craftsman 247374900 parts, diagrams, and maintenance instructions in the 247374900 owner’s manual.

Most Craftsman walk-behind mowers place the model tag in one of these spots:

• On the rear of the deck near the discharge opening
• On the top of the deck near the engine mounting area
• Near the rear wheel height adjuster
• On the handle support or rear skirt area

Using the exact model number helps us match the right part design and hardware for your mower’s deck and drive system.

Common examples on this model include:

• Lawn mower ground drive belt, 3/8 x 31-1/4-in 954-04282 for self-propelled drive issues
• Lawn mower blade adapter 687-02220 if the blade slips, wobbles, or won’t tighten correctly
• Mtd lawn mower side chute deflector 731-07486 if the side discharge chute is missing or damaged

A single digit off can point to a different deck housing, belt length, or handle setup. Confirming 247374900 first prevents wrong-part returns and speeds up repairs.

Last updated: February 2026

Craftsman model 247374900 is a gas walk-behind mower model number, but the exact build year depends on the specific serial number and date code on your mower. We use the model and serial tag to match the correct parts list and manual details for your unit; start with the 247374900 owner's manual.

Look for the model and serial label on the mower deck or rear of the unit (location varies by production run). Once you find it, use these common clues:

• Serial number: often includes a date code or can be cross-referenced to a production range
• Engine date code (on the engine shroud or valve cover area): helps narrow the timeframe
• Deck tag: may list a manufacturing date or a code that includes month and year
• Original purchase paperwork: receipt or warranty registration can confirm the year

Many Craftsman walk-behind mowers with model numbers starting with 247 were built by MTD for Craftsman. That helps explain why you may see MTD-labeled replacement parts listed for this model.

Knowing the correct year (or at least the correct production run) helps ensure you get parts that fit your exact configuration, especially for items that change across revisions like the drive system, handle hardware, and discharge components.

These are the areas where small design updates can change fit:

If you are troubleshooting a self-propel issue, the lawn mower wont move troubleshooting video motion drive failure guide pairs well with checking the drive belt and cable condition.

Last updated: February 2026

On a Craftsman walk-behind mower like model 247374900, the model number is typically printed on a label attached to the mower deck or frame, usually near the rear discharge area or around the handle mounting points. Use the model number to match the correct parts list and diagrams in the 247374900 owner's manual.

Look for a sticker or metal tag on the mower itself (not on the engine shroud). Check these spots:

• Rear of the deck, above or near the rear wheels
• Left or right side of the deck, near the height adjuster
• Frame area where the lower handle bolts to the deck
• Under the rear flap or near the rear skirt area
• Near the bagging or discharge opening

The label often lists more than one identifier. Recording all of them helps ensure you get the right Craftsman and MTD-style parts.

A worn label is common on mower decks because of grass, moisture, and abrasion.

• Clean the area with mild soap and water; avoid soaking the label
• Use a flashlight at a low angle to read faded printing
• Take a close-up photo and zoom in
• If the deck label is unreadable, check the handle frame tubes for a secondary tag

The model number is the fastest way to avoid ordering the wrong drive belt, wheel, or discharge parts. For example, self-propelled issues often trace to the correct belt size and routing, so matching the exact model is key before choosing a belt like lawn mower ground drive belt 954-04282.

Last updated: February 2026