Installation guide
Owner’s manual
Error Codes
How to identify a Kenmore washer model?
For Kenmore washer model 11026742500, the model and serial number label is located under the washer lid. Use that full model number when ordering parts so you get the correct fit and compatibility for your exact washer.
On this Kenmore top-load washer, lift the lid and look for the model/serial label on the cabinet rim or underside area near the opening. Our 11026742500 owner's manual also calls out that the label is located under the washer lid.
Tips to make it easy to read:
- Wipe dust or detergent residue off the label with a damp cloth.
- Use a flashlight and read straight on (glare can hide characters).
- Take a photo and zoom in to confirm each digit.
- Write down both the model number and serial number.
- Keep the info with your purchase date for future repairs.
Kenmore washer model numbers commonly start with 110 and include a longer string of digits (like 11026742500). That exact number is what we use to match the right diagrams and replacement parts.
| If your washer symptom is | Model number helps us match | Example part for this model |
|---|---|---|
| Won’t drain | Correct pump style and mounting | Washer drain pump WP3363394 |
| Won’t start or stops when lid opens | Correct lid switch design | Washer lid switch assembly WP8318084 |
| Agitator not moving properly | Correct agitator drive pieces | Agitator dog 80040 |
Using the exact Kenmore model number prevents ordering the wrong part (even when parts look similar). It also ensures the repair steps and wiring or fit details in the manual match your washer.
Last updated: February 2026
What is the average lifespan of a Kenmore washer?
A Kenmore washer typically lasts 10 to 15 years with normal household use. For Kenmore model 11026742500, good habits like balanced loads, avoiding overloading, and following fabric care instructions help you reach the high end of that range; heavy use and neglected maintenance shorten it (see the 11026742500 owner's manual).
- Load size and balance: loads should move freely; chronic overloading strains the drive system.
- Water quality and detergent use: excess suds and mineral buildup increase wear.
- Drain performance: slow draining makes the pump work harder and can leave residue.
- Spin stress: repeated out-of-balance spinning wears suspension and drive components.
- Usage pattern: multiple loads daily reduces life compared to a few loads weekly.
If performance changes, these parts are frequent culprits on top-load Kenmore washers like 11026742500:
| Symptom | Common cause | Example part for this model |
|---|---|---|
| Agitator “slips” or won’t move clothes well | Worn agitator dogs | Agitator dog 80040 |
| Won’t drain or drains slowly | Clogged or failing drain pump | Washer drain pump WP3363394 |
| Won’t spin or stops when lid opens/closes | Lid switch issue | Washer lid switch assembly WP8318084 |
| Agitates but won’t spin (or vice versa) | Worn motor coupling | Washer motor coupling 285753A |
- Keep loads evenly distributed; mix large and small items.
- Use the right amount of detergent; too much can cause buildup.
- Check pockets and remove strings/straps that can tangle and strain seams.
- Periodically inspect fill hoses and the drain hose for kinks or restrictions.
- If you notice new noises, leaks, or weak agitation, address it early before it damages the gearcase or basket.
A washer that is overloaded or frequently out of balance wears out high-cost components (drive, clutch, gearcase) faster. Simple loading and care steps reduce stress on the tub, basket, and drain system, helping your Kenmore washer reach its expected service life.
Last updated: February 2026
What replacement parts are most commonly needed for the 11026742500?
For the Kenmore 11026742500 washer, the most commonly replaced parts are the ones tied to draining, spinning, agitation, and lid safety. If your washer will not drain, will not spin, or will not agitate, these parts are the first places we check; confirm symptoms and part locations in the installation guide.
These are frequent wear items and failure points on top-load Kenmore washers like model 11026742500:
- Washer lid switch assembly WP8318084 (won’t spin or drain if the lid switch doesn’t signal “lid closed”)
- Washer drain pump WP3363394 (slow drain, no drain, humming, or leaks at the pump)
- Washer motor coupling 285753A (motor runs but washer won’t agitate or spin)
- Agitator dog 80040 (agitator moves weakly or only in one direction)
- Clutch 285785 (poor spin, burning smell, or clothes still very wet)
- Washer inlet valve 285805 (no fill, slow fill, or water leaking into tub when off)
| Symptom | Most likely parts to check first | What you’ll notice |
|---|---|---|
| Won’t spin | Lid switch, clutch, motor coupling | Stops at spin, wet clothes |
| Won’t drain | Lid switch, drain pump, drain hose issues | Water left in tub |
| Won’t agitate | Motor coupling, agitator dogs, agitator assembly | Tub fills but no wash action |
| Won’t fill | Inlet valve | No water or slow water |
These components control the washer’s core functions: water in (inlet valve), wash action (agitator parts and coupling), water out (drain pump), and safe operation (lid switch). Replacing the correct part restores performance and helps prevent repeat breakdowns.
- Match your symptom to the cycle step (fill, agitate, drain, spin).
- Check for simple causes first: kinked hoses, clogged drain path, unbalanced load.
- Use the diagrams for your 11026742500 to confirm the exact part location and hardware.
Last updated: March 2026
