Kenmore 79045799103 electric range Parts

To reset the Kenmore electric range model 79045799103, we recommend doing a simple power reset: turn the range off, cut power at the breaker for 1 to 5 minutes, then restore power and set the clock. This clears many control glitches.

Quick reset steps (most common)

• Press CANCEL/OFF to stop any active bake, broil, or timed cycle.
• Turn OFF the range circuit breaker (or unplug the range if accessible).
• Wait 1 to 5 minutes.
• Restore power.
• Set the time using the clock instructions in the 79045799103 owner's manual.

If the control is locked (looks like it will not respond)

This model supports an oven door/control lockout. If the display shows “LOC”, the controls are intentionally locked.

• Press CANCEL/OFF.
• Press and hold CANCEL/OFF for about 3 seconds.
• Wait about 15 seconds for the door lock motor to finish moving.

What a reset fixes (and what it does not)

A power reset is best for temporary electronic issues. If symptoms return quickly, a component may be failing.

Symptom	Reset likely helps?	What to check next
Display frozen or beeping randomly	Yes	Power supply, control panel connections
“LOC” in display	Sometimes	Cancel lockout (hold CANCEL/OFF 3 seconds)
Oven temperature seems inaccurate	Sometimes	Test/replace probe 316217002
Oven will not heat at all	Sometimes	Bake element, wiring, control

Why it matters

Resetting the control restores normal operation after a power surge or a stuck keypad, and it is the safest first step before replacing parts like the control panel, temperature sensor, or bake element.

Last updated: January 2026

For Kenmore electric range model 79045799103, the oven’s exact wattage depends on which heating function is running (bake vs. broil). Most electric ovens draw about 2,000 to 5,000 watts while actively heating; check the rating information and operating details in the 79045799103 owner's manual.

Typical wattage ranges (what you can expect)

Electric ranges cycle the elements on and off to hold temperature, so the oven does not pull max watts continuously.

• Bake element: commonly ~2,000 to 3,500 watts
• Broil element: commonly ~3,000 to 5,000 watts
• Convection fan (if equipped): typically ~50 to 200 watts
• Oven light: the manual specifies a 40-watt appliance bulb

Quick estimate: amps from watts

Use this to estimate electrical load while the oven is heating.

Supply voltage	3,000 W (typical bake)	4,800 W (strong broil)
240 V	~12.5 A	~20.0 A
208 V	~14.4 A	~23.1 A

How to confirm the wattage for your exact oven

We use these checks to get the most accurate number for your specific configuration.

• Look for the rating plate (often visible with the oven door open or inside the drawer area)
• In the manual, review the sections on setting oven controls and operating modes
• If you are troubleshooting heat issues, verify the oven is set to a temperature between 170°F and 550°F (the manual’s stated bake range)
• If the oven light is out, replace it with the correct bulb type and wattage; use range oven light bulb 316538904 if you need the replacement part

Why it matters

Knowing the oven’s wattage helps you estimate energy use, confirm the circuit is sized correctly, and diagnose symptoms like slow preheat or weak broil that can point to a failing bake element, broil circuit, or temperature sensing issue.

Last updated: January 2026

For Kenmore electric range model 79045799103, the model number is printed on the appliance identification plate. On this style of range, you’ll typically see it when the oven door is open (left side of the frame) or inside the storage drawer along the side of the frame. See the 79045799103 owner's manual for the exact label location description.

Where to look on the range

Check these common spots first (power off is not required just to read the label):

• Open the oven door and look along the left side frame (the front edge of the range body)
• Pull out the bottom storage drawer and look inside the drawer opening, along the side of the frame
• Look for an identification plate that lists Model and Serial
• Write the full model number exactly as shown (including any leading digits)

What the label usually shows

The identification plate normally includes:

• Model number (for example, 79045799103)
• Serial number
• Electrical rating information
• Manufacturer information

What you need	Why you need it
Model number	Ensures diagrams and parts match your exact range
Serial number	Helps confirm production details when ordering certain parts

Why it matters

Kenmore ranges often share similar looks across multiple model series (including 790-prefix models). Using the exact model number helps us match the correct parts and troubleshooting info, such as oven heating issues, cooktop element problems, or control panel concerns.

Last updated: January 2026

For the Kenmore electric range model 79045799103, we use a 40-amp, 240-volt double-pole breaker for most standard installations. Always match the breaker to the range’s nameplate rating and the wire size; the wiring and breaker must be sized together.

How to confirm the correct breaker size

Check the electrical requirements section in the 79045799103 owner's manual. Then verify the rating on the range’s data plate (often behind the storage drawer area or on the frame).

• Use a 2-pole breaker (ranges use 240V)
• Confirm the range’s kW/amp rating on the nameplate
• Confirm your home wiring gauge matches the breaker (breaker and wire must match)
• If you see heat damage at the cord connection, inspect the terminal block and wiring before restoring power
• If your home has aluminum branch wiring or an older panel, have an electrician verify compatibility

Typical breaker and wire pairing (common guidance)

These are common pairings used for electric ranges; use the manual and nameplate to choose the exact match.

Breaker size	Typical copper wire size	Common use case
40 amp	8 AWG	Many standard electric ranges
50 amp	6 AWG	Higher-wattage ranges or long runs

When a 40-amp breaker is not the right choice

A different breaker size is often needed when the range has a higher wattage rating, the circuit run is long (voltage drop concerns), or local electrical code requires a different setup.

• Nameplate rating indicates higher current draw
• Existing circuit is already 50 amp and properly wired
• Evidence of overheating at the power connection (burnt smell, discoloration)

If you’re troubleshooting a power connection issue on this model, the terminal block 5304409888 is the common connection point where the power cord attaches.

Why it matters

An undersized breaker can trip during baking or broiling; an oversized breaker can allow wiring to overheat. Correct breaker and wire sizing protects the control board, heating elements, and your home wiring.

Last updated: January 2026