Kenmore 25354622406 refrigerator Parts

To read a Kenmore model number, we match the full model number exactly as it appears on the appliance ID label. For this refrigerator, the model number is 25354622406; using the complete number ensures you get the correct parts list, diagrams, and installation information for your exact unit.

Most Kenmore side-by-side refrigerators place the model and serial label in one of these spots:

• Inside the fresh food compartment on a side wall
• On the ceiling area inside the refrigerator section
• Behind the crisper drawers (on the liner wall)
• On the hinge side of the door frame
• On the back of the cabinet (less common for everyday access)

If you are using documentation, the model number on the label should match what’s shown in the 25354622406 owner's manual.

Kenmore model numbers often include a prefix that helps identify the original manufacturer, followed by digits that identify the design series and feature variations.

Here is the practical way we recommend reading it:

• Copy the model number directly from the label (do not shorten it).
• Use the full model number when searching parts, not just “Kenmore side-by-side.”
• If a part looks similar, confirm it is listed for 25354622406.
• For water and ice parts, match the filter style and housing location shown in the manual.
• Keep the serial number handy; it can help narrow production changes.

Kenmore refrigerators can look identical across multiple model variations, but small differences affect fit and function. Using the exact model number helps us point you to the right diagrams and parts, such as the refrigerator water filter WFCB when you are servicing the water system.

Last updated: February 2026

Most Kenmore side-by-side refrigerators, including model 25354622406, are about 33 inches to 36 inches wide. For the exact cabinet width and required clearance for your specific unit, we recommend confirming the dimensions in the 25354622406 installation guide.

Side-by-side refrigerators are built to fit common kitchen openings, so the width is usually in a narrow range.

• Typical cabinet width: 33 to 36 inches
• Common “nominal” sizes you’ll see: 33-inch class and 36-inch class
• Door swing clearance: plan extra space so doors open fully
• Ventilation clearance: leave space around the cabinet for airflow
• Floor leveling matters: a refrigerator that is not level can affect door alignment and sealing

1. Measure the widest point of the cabinet (left to right).
2. Measure again including handles (if they stick out past the doors).
3. Measure your kitchen opening in three places (top, middle, bottom) and use the smallest number.
4. Confirm clearance and leveling steps in the 25354622406 installation guide.

Width affects more than fit. Proper clearance helps the doors seal, prevents rubbing, and supports correct leveling (the install checklist calls out doors level across the top and seals contacting the cabinet on all sides).

Last updated: February 2026

On Kenmore refrigerator model 25354622406, the SY EF code points to a cooling airflow problem, most commonly tied to the evaporator fan circuit (fan not running, fan obstructed by ice, wiring issue, or a control/defrost-related icing condition).

• Power reset: Unplug the refrigerator for 5 minutes, then plug it back in.
• Listen for the evaporator fan: You should typically hear a steady fan sound from the freezer area when the unit is running.
• Look for frost buildup: Heavy frost on the freezer back panel often means airflow is blocked.
• Confirm vents are clear: Do not block return vents with food packages.
• Check door sealing: A leaking gasket can drive frost buildup and trigger airflow errors.
• Verify temperatures: Set freezer near 0°F and fresh food near 37°F (typical targets).

If you find the fan blade damaged or rubbing, replacing the Refrigerator evaporator fan blade 5308000010 is a common repair when the motor is still good.

The evaporator fan moves cold air from the evaporator through the freezer and into the fresh food section. When airflow drops, temperatures rise, frost builds faster, and the refrigerator can stop cooling correctly.

• Use the 25354622406 owner’s manual for control settings, operating notes, and safe power-off guidance (turning controls to “0” stops cooling but does not fully disconnect power).
• If you are also seeing dispenser-related issues, the How to disassemble a Kenmore refrigerator dispenser guide helps with safe access and reassembly.

Last updated: February 2026

Your Kenmore side-by-side refrigerator model 25354622406 has a total capacity of 21.9 cubic feet. For the most accurate confirmation and any compartment breakdown (fresh food vs. freezer), we recommend checking the capacity listing in the 25354622406 owner's manual.

• Model: Kenmore 25354622406
• Refrigerator type: Side-by-side
• Total capacity: 21.9 cu. ft.
• Common capacity range for similar side-by-sides: 20 to 26 cu. ft.
• If you need water and ice performance details, the manual also covers the rear filter system and dispenser operation

Capacity is the combined interior storage volume of both sections.

Knowing the cubic feet helps us match the right refrigerator parts and accessories (like shelves, door bins, and ice storage components) and set realistic expectations for storage, especially if you use an ice maker or keep bulky frozen items.

If you are refreshing performance or storage, these are common wear items for this model:

• Refrigerator water filter WFCB (water taste, flow, and ice quality)
• Door gaskets (air leaks that reduce usable cooling space)
• Light bulb (visibility for organizing food)

Last updated: February 2026