Frigidaire FFSS2314QEBA refrigerator Parts

On the Frigidaire FFSS2314QEBA side-by-side refrigerator, we adjust temperatures using the electronic control panel at the top of the fresh food compartment. Press the Up (Cold) or Down (Colder) button nearest the freezer or fresh food display; each press changes the setting by one.

• Open the fresh food (refrigerator) door and locate the control panel at the top.
• Identify the two displays: one for Freezer and one for Fresh food/Fridge.
• Press Up (Cold) to make that compartment warmer.
• Press Down (Colder) to make that compartment colder.
• Wait for temperatures to stabilize after changes (small adjustments work best).

Some versions of this Frigidaire control show a two-digit temperature display that is for reference only, not the exact current compartment temperature. For an accurate reading, we recommend placing a separate thermometer in the freezer and fresh food sections and checking it after the unit stabilizes.

This model can disable cooling from the control panel. If cooling is off, the refrigerator and freezer will stop refrigerating.

• Press and hold the On/Off button for 3 seconds to toggle cooling.
• If the display shows an off indication, turn cooling back on the same way.

Correct temperature settings help prevent food spoilage, reduce frost and moisture issues, and keep the compressor from running longer than necessary. If temperatures drift after you adjust settings, common causes include frequent door opening, a dirty condenser, or a door gasket that is not sealing well.

• Use the FFSS2314QEBA owner’s manual for control-panel details and operating tips.
• If you see a code or flashing display, use Frigidaire refrigerator error codes to identify what the control is reporting.

Last updated: January 2026

On the Frigidaire FFSS2314QEBA, CF indicates the electronic control has detected a performance or communication problem, commonly involving the control board and the temperature display/user interface. A loose wiring connection or a failing control can trigger the code.

• Unplug the refrigerator (or switch off the breaker) for 5 minutes, then restore power to reset the control.
• Confirm the temperature controls are set normally (not turned off); see the FFSS2314QEBA owner's manual.
• Check that doors fully seal and close; warm air leaks can create abnormal operation that leads to control alerts.
• Verify the unit is level and the house power is steady (avoid outlets controlled by a wall switch).
• If the display continues flashing or CF returns, plan for a wiring and control diagnosis.

CF is most often tied to the refrigerator’s electronic control system detecting a problem. Typical causes include:

• Loose or damaged wire harness between the main control and the display/control panel
• Failing main electronic control board
• Moisture or corrosion at connectors (especially after cleaning or a spill)
• Temperature instability from airflow issues (blocked vents, heavy frost) that contributes to control faults

If troubleshooting points to a control issue, these model-compatible parts are commonly checked or replaced:

A CF code is the refrigerator telling you it is not reliably monitoring or controlling temperature. Addressing it quickly helps protect food temperatures and prevents longer run times that can stress the compressor.

Last updated: January 2026

On the Frigidaire FFSS2314QEBA side-by-side refrigerator, defrost timing is handled by the electronic control system rather than a separate, replaceable defrost timer. For access points and service-safe disassembly steps, follow the FFSS2314QEBA owner's manual.

Many Frigidaire side-by-side units like FFSS2314QEBA use an adaptive defrost strategy controlled by the main control board, so you usually will not see a small mechanical timer behind the toe grille or inside the control housing.

Common defrost-related components you may service instead:

• Electronic control board (manages defrost logic and cooling operation)
• Defrost thermostat (bi-metal) that opens/closes based on evaporator temperature
• Evaporator fan system (moves air across the evaporator and through the compartments)

These steps help confirm you are chasing a defrost issue (not an airflow or control setting issue):

• Verify the cooling system is not turned off at the control panel (some displays show an off state when disabled).
• Listen for the evaporator fan in the freezer; no airflow can mimic a defrost failure.
• Look for heavy frost on the freezer back wall; that often points to a defrost system problem.
• Confirm doors seal fully; warm air leaks can cause excess frost.

If you have a solid frost blanket on the evaporator cover and warming temperatures, these model-matched parts are common suspects:

A “missing defrost timer” is usually a sign the refrigerator uses an electronic control instead. Replacing a timer that is not used on the design will not fix frost buildup, warm temperatures, or ice maker performance issues.

Last updated: January 2026