LG LFX25971ST/01 refrigerator Parts

For LG model LFX25971ST, the exact price of a refrigerator leveling leg depends on the specific leg (front vs. rear, left vs. right) and the exact part number used on your unit. Use the LFX25971ST parts list to match the correct leveling leg, then you will see the current price for that part.

How to find the correct leveling leg for LFX25971ST

• Check whether you need a front leveling leg (most common) or a rear support/roller style foot.
• Look for damage symptoms: stripped threads, bent shaft, cracked foot pad, or a leg that will not turn.
• Confirm the leg location: left and right legs can differ.
• Match by model first, then match by diagram callout and description.
• Use the instructions in the LFX25971ST owner's manual to confirm leveling points and adjustment method.

Typical price range (what most customers see)

Leveling legs for bottom-mount refrigerators are usually a lower-cost hardware part.

Part type	Typical price range	Notes
Leveling leg/foot (single)	$10 to $40	Varies by design and whether hardware is included
Roller/foot assembly	$20 to $80	Often costs more than a simple threaded leg

Why it matters

A worn or broken leveling leg can cause door alignment issues, poor door sealing, vibration noise, and water leaking from the dispenser or icemaker area if the cabinet is not level. Proper leveling helps the doors close consistently and protects the door gasket.

Last updated: February 2026

Cooling problems are the most common issue we see across LG refrigerators, including the LG LFX25971ST; symptoms include a warm fresh-food section, a soft-freezing freezer, or temperatures that swing. Many “not cold enough” complaints trace back to airflow, defrost, or sealed-system performance. For model-specific checks and control settings, use the LFX25971ST owner's manual.

Most common symptoms customers notice

• Refrigerator section is warm but freezer seems closer to normal
• Freezer temperature rises, ice cream gets soft, or ice production slows
• Louder-than-normal fan noise or intermittent buzzing/humming
• Frost buildup on the back wall or around vents
• Water or ice dispenser flow is weak or stops

Quick checks that fix many “not cooling” calls

1. Confirm settings: Set refrigerator to about 37°F and freezer to about 0°F.
2. Check airflow: Do not block interior vents with food packages.
3. Clean condenser area: Dust buildup reduces heat removal and can cause warm temps.
4. Inspect door sealing: A leaking gasket lets in warm, moist air and drives frost.
5. Listen for fans: If you do not hear the evaporator fan, cooling will suffer; the refrigerator evaporator fan motor 4681JB1027C is a common fix when the fan is not running.

Common causes and what they usually affect

Likely cause	What you’ll notice	Typical next step
Dirty condenser / poor ventilation	Gradual warming, longer run times	Clean coils and improve clearance
Door not sealing	Frost, moisture, temp swings	Reseat door, inspect gasket; replace if torn
Defrost system issue	Frost blanket on evaporator cover	Check defrost components such as the refrigerator defrost sensor assembly 6615JB2005H
Water/ice supply issue	Slow dispenser, small cubes, no ice	Check filter, tubing, inlet valve

Why it matters

When cooling is weak, food safety and compressor run time become immediate concerns. Fixing airflow, sealing, and defrost problems early helps the refrigerator maintain stable temperatures and reduces strain on major components.

Helpful DIY guidance

• LG bottom freezer refrigerator error codes
• How to change the water filter in an LG refrigerator

Last updated: February 2026

A bottom leak on an LG LFX25971ST refrigerator is usually caused by a defrost drain problem (water can’t reach the drain pan), a water supply leak to the ice maker or dispenser, or a door seal issue that creates excess condensation. Use the LFX25971ST owner's manual to confirm access points and safety steps.

Quick checks we recommend first

• Unplug the refrigerator before removing panels or working near wiring.
• Look at the floor pattern: front-center leaks often point to the defrost drain; back-bottom leaks often point to the water line or inlet valve.
• Check the freezer floor for a sheet of ice or standing water (classic defrost drain symptom).
• Inspect the water line behind the unit for drips, kinks, or rubbing.
• Check door closing: make sure drawers and bins are not preventing a full seal.

Most common causes (and what to do)

1) Clogged or frozen defrost drain

When the drain clogs, defrost water overflows and can leak out the bottom.

• Thaw any ice on the freezer floor.
• Flush the drain with warm water (a turkey baster works well).
• If the drain tube is split or won’t stay connected, replace the refrigerator drain tube 5251JA3003D.

2) Water supply leak (ice maker or dispenser)

A slow drip can run down and show up as a bottom leak.

• Check the tubing connections and look for cracks.
• If the line is damaged, replace the refrigerator water tubing MJU62070602.
• If the valve seeps or won’t shut fully, replace the refrigerator water inlet valve MJX41178908.

3) Door gasket not sealing

Warm air leaks in, moisture condenses, and water can migrate to the bottom.

• Clean the gasket and mating surface.
• Warm and reshape minor gasket waves with a hair dryer on low.
• Replace a torn or hardened seal with the refrigerator door gasket MDS64172919.

Symptom-to-cause guide

What you notice	Most likely cause	Best next step
Water/ice on freezer floor	Clogged/frozen defrost drain	Thaw and flush drain; check drain tube
Drip behind fridge near wall	Tubing or inlet valve leak	Inspect tubing; test/replace inlet valve
Moisture around door edges	Door gasket leak	Clean/reshape gasket; replace if torn

Why it matters

Leaks can lead to slippery floors, ice buildup that blocks airflow, and water damage to nearby components. Fixing the source early helps your LFX25971ST cool consistently and prevents repeat puddles.

For step-by-step prevention tips, we also recommend how to prevent water dispenser and ice maker problems.

Last updated: February 2026

On an LG LFX25971ST bottom-mount refrigerator, the “bottom part” usually means the bottom freezer compartment (the pull-out drawer area). People also use “bottom part” to mean the lower front kickplate/toe grille area where airflow and service access are located.

Common meanings of “bottom part”

• Bottom freezer drawer: the freezer compartment at the bottom of the cabinet.
• Freezer basket/rail area: the sliding hardware that supports the freezer baskets.
• Kickplate/toe grille: the lower front trim panel area near the floor.
• Machine compartment (under/back): where cooling-system components like the compressor and condenser fan area are located.
• Lower fresh-food drawers: crisper or deli-style drawers at the bottom of the refrigerator section.

Quick guide: what you might be describing

If you mean this…	Typical name	What it does
Pull-out bottom drawer	Bottom freezer	Stores frozen food
Sliding tracks under the freezer basket	Freezer basket support rail	Lets baskets slide smoothly
Rubber seal around the bottom door/drawer	Door gasket	Keeps warm air out
Lower front trim near the floor	Kickplate/toe grille	Protects, helps airflow

Model-specific parts that relate to the “bottom” area

If your question is about a broken or hard-to-slide freezer drawer, these parts are commonly involved:

• Refrigerator freezer basket support rail, left 4932JA1010A
• Refrigerator freezer basket support rail, right 4932JA1010B
• Refrigerator door gasket MDS64172919 (if the bottom freezer door/drawer is not sealing)

Why it matters

Using the right name helps you match the correct diagram and order the correct LG replacement part. For example, “freezer rail” and “door gasket” are very different fixes even though both are in the bottom area.

Where to confirm the exact term for your layout

We recommend checking the exploded views and terminology in the LFX25971ST owner's manual.

Last updated: February 2026