Kenmore Elite 79577242602 refrigerator Parts

The Kenmore Elite refrigerator model 79577242602 is a bottom-mount refrigerator; its exact cubic-foot capacity depends on the specific configuration listed on the model’s rating label and in the 79577242602 owner’s manual. Use the manual and the rating label to confirm the precise total capacity for your unit.

Where to find the exact capacity

Most Kenmore Elite bottom-mount refrigerators list total capacity (and sometimes separate fresh food and freezer capacity) in one of these places:

• The model’s rating label inside the fresh food compartment (often on a side wall near the crisper area)
• The specifications section of the 79577242602 owner’s manual
• The product information section that accompanies the refrigerator paperwork

Quick checks that help confirm you have the right spec

Capacity varies across similar-looking models, so match the details below before relying on any number:

• Confirm the full model number is 79577242602 (not just “795”)
• Check whether your unit has features like Ultra Ice and a door alarm (both are described in the manual)
• Verify the temperature control range shown on your control panel (the manual lists typical ranges)
• Compare shelf and drawer layout to the diagrams in the manual

Typical capacity range (for context)

If you are estimating space for a move or kitchen planning, most Kenmore Elite bottom-mount refrigerators of this style commonly fall in this range:

Refrigerator type	Typical total capacity range
Bottom-mount (Kenmore Elite style)	About 20 to 26 cu. ft.

Why it matters

Knowing the correct cubic-foot capacity helps you compare replacement models, plan food storage, and choose compatible accessories (like filters and bins) without guessing.

Last updated: January 2026

A Kenmore Elite refrigerator like model 79577242602 typically lasts 12 to 15 years. Keeping the condenser area clean, maintaining good airflow around the cabinet, and addressing door-seal or cooling issues quickly helps you reach (and often exceed) that average.

What affects lifespan the most

• Condenser coil cleanliness: Dust buildup makes the compressor run hotter and longer.
• Door gasket condition: Air leaks cause longer run times and temperature swings.
• Ventilation/clearance: Tight spaces reduce heat dissipation.
• Power interruptions: Frequent outages or surges can stress controls and the compressor start components.
• Water and ice system upkeep: Filter changes and leak prevention reduce secondary damage.

Maintenance checklist (high impact, low effort)

Use the care and cleaning guidance in the 79577242602 owner's manual to match the recommended cleaning areas and intervals.

• Vacuum and brush the condenser coils regularly.
• Clean door liners and gaskets; confirm the doors close and seal evenly.
• Keep interior vents unblocked so cold air can circulate.
• Replace the water filter on schedule; flush water after changes.
• If the light stays on with the door closed, test the door switch (a stuck switch can add heat).

Quick reference: lifespan vs. what you can control

Item	Typical impact on lifespan	What to do
Dirty condenser coils	High	Clean coils and ensure airflow
Leaking door gasket	High	Inspect, clean, and correct sealing
Poor ventilation	Medium to high	Maintain clearance and avoid blocking vents
Infrequent filter changes	Medium	Replace filter on schedule

Why it matters

Most “early failures” are really heat and run-time problems: when the refrigerator has to work harder to maintain temperature, the sealed system and compressor components wear faster. Simple cleaning and sealing checks protect the most expensive parts.

Last updated: January 2026

For Kenmore Elite bottom-mount refrigerator model 79577242602, use the exact height, width, and depth listed in the 79577242602 owner's manual. This model’s dimensions depend on whether you measure to the cabinet, hinges, doors, and handles, so measuring the unit in place is essential.

How we recommend measuring (so you get the right fit)

Measure in inches with a tape measure; take each measurement twice.

• Width (cabinet): left cabinet side to right cabinet side
• Height (to top): floor to top of hinge cover (or top of cabinet if no cover)
• Depth (cabinet): back of cabinet to front edge of doors
• Depth (overall): include handles if they stick out
• Clearance space: allow room for airflow and door swing

Typical size range for this Kenmore Elite style

These ranges help you plan a cabinet opening or delivery path; confirm the exact numbers for 79577242602 in the manual.

Measurement	Typical range for Kenmore 795 bottom-mount	What changes it most
Width	~33 in	Door design and trim
Height	~69 to 71 in	Leveling legs, hinge cover
Depth (without handles)	~33 to 36 in	Door thickness
Depth (with handles)	~35 to 38 in	Handle style

Why it matters

Correct dimensions prevent delivery issues, ensure doors open fully, and keep condenser airflow unobstructed for proper cooling and energy efficiency.

If you are measuring because the doors are not closing right

Door alignment and sealing can change after moving or leveling.

• Level the refrigerator with a slight tilt back so doors self-close
• Check for bins or shelves preventing the door from shutting
• Inspect the gasket for gaps or tears
• If the interior lights stay on, test the door switch

A common related part for light and door-closed sensing is the lg refrigerator door switch 6600JB1010A.

Last updated: January 2026