Kenmore 41742042100 washer Parts

Your Kenmore washer model number is printed on the identification plate; on model 41742042100, it’s located at the top, inside the door opening. Once you have the full model number, we can match the correct Kenmore washer parts and the right installation and service information in the 41742042100 owner's manual.

Where to look on the washer

For Kenmore washers, the model tag is usually in one of these spots:

• Front-load washer: inside the door opening (often at the top edge)
• Top-load washer: under the lid, around the rim of the opening
• Rear of cabinet: on the back panel near the power cord or inlet hoses
• Control area: behind or beside the console on some designs

What the model number looks like (and why it matters)

Kenmore model numbers are commonly 11 characters or more and may start with a 3-digit prefix (for example, 417 for many Kenmore front-load designs). Using the exact model number helps us ensure parts like a door lock, drain pump, or water inlet valve fit correctly.

What you find	What to do with it	Why it helps
Model number (example: 41742042100)	Use it to search parts by model	Ensures correct fit and wiring/connector match
Serial number	Keep it for service history	Helps identify production run details
Prefix (example: 417)	Use it to narrow error code and design family info	Speeds up troubleshooting and parts lookup

Tips to avoid ordering the wrong part

• Write the model number exactly as shown (include all digits)
• Take a clear photo of the identification plate before ordering
• Match the part description to the symptom (drain issue vs. fill issue vs. door won’t lock)
• Use the manual to confirm control style and operating steps

Why it matters

Kenmore washers can look similar across multiple series, but small differences in door lock style, hose routing, and electrical connectors can change which replacement part fits. The correct model number is the fastest way to get the right repair the first time.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use. For the Kenmore 41742042100, routine care (proper loading, correct detergent, and periodic cleaning) helps you reach the high end of that range; heavy use and chronic vibration shorten it.

What affects washer lifespan the most

• Overloading the drum (stresses bearings, suspension, and motor)
• Frequent unbalanced loads (increases vibration and wear)
• Hard water and detergent buildup (can affect valves, hoses, and drainage)
• Poor draining (can overwork the pump and leave odors)
• Door seal care on front-load designs (prevents leaks and mildew)

Maintenance checklist we recommend

Use the care steps in the 41742042100 owner's manual as your baseline, then add these habits:

• Leave the door slightly open between loads to dry the tub
• Wipe the door boot and glass after the last load of the day
• Run a monthly cleaning cycle (or hot cycle) to reduce residue
• Check inlet screens and hoses periodically for restricted flow
• Level the washer to reduce shaking and suspension wear

Common wear items and what they usually cause

Symptom	Often related to	What to check first
Won’t drain or drains slowly	Drain pump, drain hose, clogs	Coins, lint, hose kinks, pump noise
Leaks at the door	Door boot (bellows), door closure	Tears, clamp fit, door alignment
Excessive shaking or banging	Shock absorbers, leveling	Floor stability, feet adjustment
Door won’t latch or won’t start	Door latch/lock parts	Latch engagement, error behavior

If you are chasing a door-latch problem, the door catch 131763256 is a common related part on this model.

Why it matters

A washer that is kept level, drains freely, and stays clean runs cooler and smoother. That reduces strain on high-cost components (motor control, bearings, and suspension) and is the biggest difference between a 10-year washer and a 15-year washer.

Last updated: February 2026

Yes, repairing a Kenmore washer is worth it when the fix restores reliable operation for less than about half the cost of a comparable new washer, especially for common, repairable failures on the Kenmore 41742042100 such as draining, door-latch, or vibration issues. Use the 41742042100 owner's manual to match symptoms to the right repair path.

Quick way to decide (cost vs. value)

Use this simple rule of thumb after you get a diagnosis.

• Repair if the total repair cost is under 50% of replacement cost.
• Repair if the washer is otherwise in good shape (no major leaks, no severe rust, no repeated breakdowns).
• Repair if the problem is a single system (drain, fill, door lock, suspension) and parts are available.
• Replace if multiple major systems are failing at once (for example: repeated leaks plus poor spin plus electrical issues).
• Replace if the tub and bearing area is noisy and worsening (often a high-labor repair on front-load designs).

Common repairs that are usually “worth it”

These are frequent, targeted repairs that typically restore normal performance.

Symptom	Likely area	Example part for this model
Won’t lock or start	Door latch/lock	Door catch 131763256
Won’t drain or leaves water	Drain pump or hoses	Washer drain pump 137108000
Shakes, bangs, walks	Shock absorbers/leveling	Level shock 5304485917

Why it matters

A correct diagnosis prevents repeat service calls and protects the washer from secondary damage (for example, running a washer that will not drain can strain the pump and leave water that causes odors). The safety guidance in the installation guide also helps you avoid electrical shock by disconnecting power before maintenance.

What we recommend before spending money

• Confirm the symptom and when it happens (fill, wash, drain, spin).
• Check for simple causes first (overloading, unbalanced load, kinked drain hose).
• Review the troubleshooting and safety sections in the 41742042100 owner's manual.
• Price the repair using the exact model number 41742042100 to avoid mismatched parts.

Last updated: February 2026