Kenmore Elite 79572043316 refrigerator Parts

Kenmore Elite bottom-mount refrigerator model 79572043316 has a total capacity of 30.59 cubic feet. For the breakdown by compartment (refrigerator vs. freezer) and the full spec list for your exact color code, use the 79572043316 owner's manual.

Where to verify the capacity on the appliance

These checks confirm you are matching the correct version of the Kenmore 795 platform.

• Check the rating label inside the fresh food compartment (often on a side wall or door frame).
• Match the model family shown on the manual cover (795.7205* / 7204*) to your full model number.
• Use the model and serial from the rating label when comparing specs across similar 795 models.
• If you are ordering maintenance items, confirm the platform by matching common consumables like the Kenmore refrigerator water filter 9690 AGF80300801.

Capacity at a glance

Spec	Value
Total capacity	30.59 cu. ft.
Refrigerator type	Bottom-mount
Brand	Kenmore Elite

Why it matters

Knowing the exact cubic feet helps with kitchen planning (cabinet clearance and storage needs) and with performance expectations, such as temperature recovery after door openings and how much airflow space you should leave around food.

Last updated: February 2026

Common problems on the Kenmore Elite refrigerator model 79572043316 include warm temperatures (often airflow or defrost related), water or ice dispenser issues, door sealing problems that cause frost or sweating, and unusual noises from fans. We use the troubleshooting steps in the 79572043316 owner’s manual to narrow the cause before replacing parts.

Most common symptoms and what usually causes them

• Not cooling or weak cooling: dirty condenser coil, failed evaporator fan, defrost system trouble, or sealed system/compressor issues
• Freezer cold but fridge warm: blocked air vents, damper/airflow problem, frost buildup on the evaporator
• Ice maker not making ice: restricted water supply, clogged filter, frozen fill tube, or ice maker failure
• Water dispenser slow/no water: clogged filter, kinked water line, low house water pressure
• Frost, condensation, or leaks: door gasket not sealing, doors out of alignment, clogged defrost drain

Quick checks we recommend before buying parts

1. Confirm settings: set refrigerator to about 37°F and freezer to about 0°F.
2. Check airflow: make sure vents inside the fresh food section are not blocked by food packages.
3. Clean heat exchange areas: vacuum dust from the condenser area; heavy dust can raise temps.
4. Inspect door sealing: look for gaps, torn gasket areas, or doors that sit uneven.
5. Check water supply: verify the shutoff valve is fully open and the supply line is not kinked.

Parts that commonly solve these problems (when diagnosis points there)

Symptom	Common part involved	Example part for this model
Bad taste/slow water, weak ice production	Water filter	Genuine Kenmore refrigerator water filter 9690 AGF80300801
Odors in fresh food section	Air filter	Lg refrigerator air filter ADQ73214408
Warm temps, long run times	Condenser coil dirty/damaged	Refrigerator condenser coil ACG73645004
Lights or alarms act up when door closes	Door switch	Refrigerator door switch 6600JB1010A

Why it matters

Catching airflow, filter, and door seal issues early helps the refrigerator hold temperature, reduces frost and leaks, and prevents the compressor from running excessively. That protects food and can reduce wear on high-cost components.

Last updated: February 2026

Most Kenmore Elite refrigerators, including model 79572043316, last 10 to 15 years with normal household use. Consistent maintenance (clean airflow, good door sealing, and timely filter changes) is what most directly determines whether you land closer to 10 years or closer to 15.

What typically shortens (or extends) refrigerator life

We see lifespan drop fastest when cooling and airflow are restricted or when moisture gets into places it should not.

• Dirty condenser area and poor ventilation around the cabinet
• Doors not sealing well (warm air leaks in, compressor runs longer)
• Heavy ice buildup from defrost or door-seal issues
• Skipped water filter and air filter changes (can strain dispenser and airflow systems)
• Frequent power interruptions or unstable power

Maintenance checklist for model 79572043316

These steps match how bottom-mount units like this Kenmore Elite are designed to run day to day; use the care and maintenance schedule in the 79572043316 owner's manual for model-specific details.

• Keep the condenser area clean and make sure vents are not blocked
• Confirm doors close squarely and do not “pop” back open
• Replace the water filter on schedule; use genuine Kenmore refrigerator water filter 9690 AGF80300801
• Replace the air filter when odors linger or airflow seems reduced; use lg refrigerator air filter ADQ73214408
• Set stable temperatures (avoid frequent large adjustments)

Quick guide: what to expect by age

Refrigerator age	What’s normal	What to watch for
0 to 5 years	Steady temps, quiet cycling	Installation leveling, door alignment, filter habits
6 to 10 years	Minor wear items may show up	Noisy fans, slow ice production, gasket gaps
11 to 15 years	Higher chance of major repair	Warm temps, long run times, repeated icing
16+ years	End-of-life becomes common	Sealed system or compressor symptoms

Why it matters

A refrigerator’s compressor and sealed system last longest when the unit can shed heat efficiently and keep moisture out. Simple upkeep (airflow, seals, filters) reduces run time, stabilizes temperatures, and helps the refrigerator reach its full service life.

Last updated: February 2026

On Kenmore Elite model 79572043316, the model and serial number are printed on an identification label inside the fresh food (refrigerator) compartment, on the interior liner. This label is meant to be easy to access when you need parts, service, or the correct manual.

Where to look (fast checklist)

• Open the refrigerator (upper) door, not the freezer drawer
• Look along the interior side walls (the liner) inside the refrigerator compartment
• Check near the crisper drawer area (often easiest to spot with drawers closed)
• If you do not see it right away, slide out the lower drawers for a clearer view
• Write down both the model number and serial number exactly as shown

What the label looks like and what you need from it

The identification label typically includes:

• Model number (for this page: 79572043316)
• Serial number
• Electrical ratings and other manufacturing details

Why both numbers matter

Item	What it’s used for	Example
Model number	Matching parts diagrams and compatible replacement parts	79572043316
Serial number	Dating the unit and confirming production details for service	(varies by unit)

Why it matters

Using the exact model number prevents ordering the wrong Kenmore refrigerator parts (like a water filter, door bin, or door gasket) and helps you pull the correct procedures from the 79572043316 owner's manual.

Last updated: February 2026

Kenmore is a brand name, so replacement parts for your Kenmore Elite refrigerator model 79572043316 are made by the original component manufacturers that built the refrigerator and its systems. In practice, that means many Kenmore parts are produced by major manufacturers (commonly Whirlpool, Frigidaire/Electrolux, GE, and LG), and the correct match is determined by your exact model and part number.

How to identify the correct manufacturer for your part

We recommend matching parts by model number and the part’s identifier, not by guessing the maker.

• Use the model number 79572043316 when searching parts
• Match the part number and part ID shown for the component
• Compare the part description to the location and function in the refrigerator
• Use diagrams and part lists to avoid ordering a similar looking but incompatible part
• Confirm whether the part is a consumable (filter) or a repair component (switch, motor, board)

For model-specific part identification and locations, use the 79572043316 owner's manual.

Examples of model-matched parts (this refrigerator)

These are examples of parts listed for Kenmore Elite 79572043316; the manufacturer varies by component, but the fit is verified by the model match.

Part type	Example part name	Part ID
Water filter	Genuine Kenmore Refrigerator Water Filter 9690	AGF80300801
Air filter	Lg Refrigerator Air Filter	ADQ73214408
Door switch	Refrigerator Door Switch	6600JB1010A

If you are replacing a filter, our step-by-step guidance is in how to replace the water filter in a Kenmore refrigerator.

Why it matters

Kenmore-branded appliances were sourced from different manufacturers over the years. Ordering by the exact model 79572043316 and the exact part identifier prevents fit issues, leaks (water system parts), and repeat repairs.

Last updated: February 2026

Water leaking from the bottom of your Kenmore Elite 79572043316 is usually caused by a defrost drain that is clogged and overflowing into the base, or a water supply leak from the dispenser/ice maker tubing. Less often, an internal cooling issue creates excess frost that melts and spills.

Quick checks that solve most bottom leaks

• Look for ice or sludge in the freezer floor or under the crisper drawers; this points to a clogged defrost drain.
• Check the water filter area for drips and make sure the filter is fully seated.
• Inspect the water line connections behind the refrigerator for slow leaks.
• Check the ice maker fill area for a frozen fill tube or splashing/overflow.
• Confirm doors seal tightly; warm air leaks create heavy frost and extra meltwater.

Most common causes and what to do

Likely cause	What you’ll notice	What we recommend
Clogged defrost drain	Water pooling inside, then leaking out the bottom	Clear the drain path and flush with hot water (per the 79572043316 owner's manual)
Cracked or loose water tubing	Drips near the filter, hinge area, or behind unit	Inspect and replace damaged tubing such as refrigerator water tubing MJU62070602
Filter not seated or damaged	Leaks right after a filter change	Reinstall the filter and check the housing; replace the filter if needed
Door gasket not sealing	Frost buildup, water after defrost cycles	Clean and reshape gasket; replace if torn (right door uses refrigerator door gasket, right ADX72930461)

Why it matters

A bottom leak can damage flooring and also lead to ice buildup around the evaporator area, which reduces airflow and cooling performance. Fixing the drain or water supply leak early helps protect the compressor and keeps temperatures stable.

Helpful related DIY guidance

• Use how to replace the water filter in a Kenmore refrigerator if the leak started right after a filter change.
• Use how to get rid of refrigerator puddles for step-by-step drain and water source troubleshooting.

Last updated: February 2026

If your Kenmore Elite refrigerator model 79572043316 is warm at the bottom, the most common cause is restricted airflow: blocked air vents, overpacked shelves, or a door that is not sealing. We start by restoring airflow and verifying the temperature settings, then check for fan or defrost issues.

Quick checks that fix most “warm bottom” complaints

• Make sure air vents are not blocked by food containers (both fresh food and freezer sections).
• Reduce overcrowding so cold air can circulate to the lower shelves and drawers.
• Confirm the unit is not in demo mode and the controls are not set to OFF (some models).
• After any setting change, allow up to 24 hours for temperatures to stabilize.
• Minimize long door openings; warm, humid air quickly raises compartment temperature.

Airflow and temperature targets

Cold air is moved by fans and routed through vents; when that path is restricted, the bottom area often warms first.

What to check	What you should see	What it means if not
Vents and return air paths	Clear openings, no packages pressed against vents	Cold air cannot reach the bottom shelves
Door closing and sealing	Door closes easily, no gaps	Warm air leaks in and overwhelms cooling
Time since install/move	24 hours or more	Normal warm period right after setup

When to suspect a part problem

If vents are clear and settings are correct but the bottom stays warm, we focus on cooling system airflow and defrost performance.

• Frost buildup on the back wall or freezer panel can point to a defrost problem; a common component is the refrigerator defrost sensor assembly 6615JB2005R.
• Weak cooling in both sections can also relate to sealed system issues (compressor, refrigerant); this is typically a professional repair.
• If odors and stale air are also noticeable, replacing the lg refrigerator air filter ADQ73214408 helps overall freshness (it does not directly create cold air, but it supports normal airflow through the filtration path).

Why it matters

A warm bottom is usually an airflow issue, not a lack of “cold production.” Restoring circulation protects food safety, reduces compressor run time, and prevents frost and moisture problems.

For model-specific control and airflow diagrams, follow the steps in the 79572043316 owner’s manual.

Last updated: February 2026