Kenmore Elite 10655616400 refrigerator Parts

Your Kenmore Elite refrigerator’s model number is printed on the model and serial number label, which is typically located on the inside wall of the refrigerator compartment. For your unit, the model number format commonly starts with 106; confirm the full number on the label and match it to your parts list.

Where to look for the model number label

We recommend checking these common spots first (use a flashlight and look for a sticker or metal tag):

• Inside the fresh food (refrigerator) compartment on an interior side wall
• On the wall behind the lower crisper drawer area (you may need to slide drawers out)
• Inside the freezer compartment on an interior wall
• Behind the lower toe grille or kick plate area (if your design uses a lower access panel)

For Kenmore Elite model 10655616400, the owner's manual notes the label is located on the inside wall of the refrigerator compartment.

What to write down (and why)

Record these items exactly as shown on the label:

• Model number (example for this page: 10655616400)
• Serial number
• Purchase date (if available)

Why it matters

The model number ensures we match the correct Kenmore parts and diagrams for your exact configuration (ice maker, dispenser, door bins, and water filtration). Even small model-number differences can change which water filter, inlet valve, or ice maker fits.

Quick check: model number vs. serial number

Item	What it identifies	Used for
Model number	The refrigerator design and parts family	Ordering the correct replacement parts
Serial number	Your specific unit’s production run	Service history and production details

Ordering parts once you find it

After you confirm the model number, you can order replacement parts from the parts list for your refrigerator, or search by model number on Sears PartsDirect. Common replacements for this model include the refrigerator ice maker 2198597 and the genuine Kenmore refrigerator water filter EDR3RXD1.

Last updated: February 2026

Common problems on the Kenmore Elite 10655616400 side-by-side refrigerator include warm temperatures from airflow or defrost issues, water or ice dispenser troubles tied to the filter or water supply, interior moisture buildup from frequent door openings, and fan-related noise. Our owner's manual troubleshooting steps help narrow the cause quickly.

Most common symptoms and what they usually point to

• Refrigerator or freezer too warm: blocked air vents, heavy use, warm room, or a defrost/airflow problem
• Frost buildup or poor airflow: defrost system issue (heater, defrost bi-metal) or door not sealing well
• Water dispenser slow or not dispensing: clogged/incorrectly installed filter, kinked supply line, shutoff valve issue
• Water or ice leaking at the dispenser: ice stuck holding the trap door open, or air in the water lines after filter changes
• Moisture inside the refrigerator: doors opened often, humid room, or vents blocked

Quick checks we recommend first (no tools)

1. Confirm set temperatures and wait 24 hours after any change before judging results.
2. Clear air vents inside both compartments; don’t pack food in front of vents.
3. Check door closing: make sure doors fully shut and aren’t bouncing back.
4. Inspect the water line behind the refrigerator for kinks.
5. If cooling seems “stuck” on models with digital controls, turn the unit OFF then ON to reset.

Parts that commonly solve these issues

If your symptoms match, these model-compatible parts are common fixes:

Symptom	Likely system	Example part on this model page
No ice or weak water flow	Water supply/valve/filter	Refrigerator inlet valve W10408179 or genuine Kenmore refrigerator water filter EDR3RXD1
Frost buildup, warm fridge	Defrost system	Refrigerator heater WP2323198 or refrigerator defrost bi-metal WPW10225581
Warm fridge, noisy airflow	Evaporator airflow	Refrigerator evaporator fan blade WP2169142

Why it matters

Most “not cooling” complaints are really airflow problems (blocked vents or frost on the evaporator) or water system restrictions (filter or supply). Catching the pattern early prevents food spoilage and reduces strain on the sealed refrigeration system.

For ordering model-specific replacement parts, use the parts list for Kenmore Elite 10655616400, or search by model on Sears PartsDirect.

Last updated: February 2026

Your Kenmore Elite refrigerator model 10655616400 is a full-size side-by-side; most Kenmore side-by-side refrigerators in this series are about 24 to 26 cubic feet. For the exact capacity for your specific unit, we recommend checking the specifications section in the owner's manual.

How to estimate cubic feet yourself (quick method)

If you want a close estimate, measure the usable interior (not the outside cabinet) and calculate:

• Measure interior width (inches)
• Measure interior height (inches)
• Measure interior depth (inches)
• Multiply: width x height x depth = cubic inches
• Divide by 1,728 to convert cubic inches to cubic feet

Example calculation

What you measure	Example value	What to do
Interior width	18 in	Multiply all 3 measurements
Interior height	60 in	Result is cubic inches
Interior depth	22 in	Divide by 1,728

Example: 18 x 60 x 22 = 23,760 cubic inches then 23,760 / 1,728 = 13.75 cu ft (that would be for one compartment, not the whole refrigerator).

What to measure (so the estimate is realistic)

To avoid an inflated number, we measure the space you can actually load with food:

• Measure refrigerator compartment and freezer compartment separately
• Measure to the inside liner, not to door bins or protruding housings
• Subtract space taken by fixed components (ice maker housing, air tower) if they reduce usable depth
• Keep shelves in their normal position (don’t measure with shelves removed)

Why it matters

Cubic feet helps you compare storage size, but it also affects how you shop for accessories and parts (like bins, shelves, and filtration components). If you are replacing filtration parts, match by model and part ID, such as the genuine Kenmore refrigerator water filter EDR3RXD1 and refrigerator water filter cap (black) WP2260518B. You can also search by model number on Sears PartsDirect.

Last updated: February 2026

On Kenmore Elite refrigerator model 10655616400, an ice maker that is not making ice is usually caused by the ice maker switch being OFF, the water shutoff valve being closed, a jam in the ejector area, or restricted water flow from a clogged filter or weak inlet valve. Use the 10655616400 owner's manual to confirm switch location and the exact checks.

Quick checks (fastest fixes first)

• Set the ice maker ON/OFF switch to ON (left).
• Make sure the freezer door closes fully; the sensor stops ice production when the door is open or the bin is removed.
• Confirm the household water shutoff valve to the refrigerator is fully ON.
• If the refrigerator or ice maker was just installed, allow 72 hours for full ice production.
• If you just emptied the bin, allow 24 hours to rebuild ice.

Water flow problems to rule out

Restricted water flow prevents the mold from filling.

• Replace a clogged filter with the correct refrigerator water filter EDR3RXD1.
• If flow is still weak after a new filter, the refrigerator inlet valve W10408179 can be the cause.
• Check for a kinked supply line behind the refrigerator.

Symptoms guide

What you notice	Most likely cause	What to do
Ice mold is dry (no water)	Shutoff off, clogged filter, bad inlet valve	Turn on water, replace filter, replace valve
Ice mold has water but no cubes dumped	Jam or failed ice maker assembly	Clear jam; replace ice maker if needed
Slow ice production	New install, warm freezer, restricted flow	Wait 24 to 72 hours; restore water flow

Why it matters

The ice maker depends on steady water pressure and a clear harvest path; fixing the underlying water-flow or jam issue restores normal cube production and helps prevent repeat failures.

You can order model-specific replacement parts from the parts list for 10655616400, or search by model number on Sears PartsDirect.

Last updated: February 2026

To replace the ice maker in your Kenmore Elite 10655616400 side-by-side refrigerator, we unplug the refrigerator, turn the ice maker OFF, and shut off the water supply (if connected). Then we remove the ice bin, swap the ice maker assembly, restore power, and turn the ice maker back ON using the freezer ON/OFF switch.

Before you start (safety and setup)

• Unplug the refrigerator or disconnect power at the breaker.
• Slide the ice maker control to OFF (right) before working.
• Shut off the main water supply to the refrigerator.
• Remove the ice storage bin from the freezer door (press the release button and lift up and out).
• Protect the floor and keep screws in a cup so nothing gets lost.

Replacement steps (typical for this model)

1. Remove the ice bin so you can access the ice maker area.
2. Disconnect the ice maker wiring harness plug.
3. Remove the mounting screws and lift the ice maker out.
4. Install the replacement ice maker, tighten mounting screws, and reconnect the wiring harness.
5. Reinstall the ice storage bin.
6. Restore power, turn the water supply back on, then slide the ice maker control to ON (left).

If you are replacing the complete assembly for this model, use the correct part: refrigerator ice maker 2198597. For model-specific diagrams, screw locations, and access details, follow the owner's manual.

Quick checks after installation

• Confirm the freezer door closes fully and the bin is seated correctly.
• Make sure the ice maker control is ON (left).
• Verify the shutoff sensor area is not blocked (bin installed, door closed).
• Expect the first batch of ice to take several hours after installation.

Troubleshooting guide (symptom to check)

Symptom	Most common check	Related part to consider
No ice production	Ice maker switch OFF, bin not seated, freezer not cold enough	Refrigerator ice maker 2198597
Small or hollow cubes	Low water flow, restricted supply	Refrigerator inlet valve W10408179
Water not filling ice maker	Water supply off, valve not opening	Refrigerator inlet valve W10408179
Ice clumps or jams at dispenser	Dispenser door not sealing	Refrigerator ice dispenser door WP2180353

Why it matters

A correctly installed ice maker and properly seated ice bin let the shutoff sensor work as designed, preventing overfilling and helping maintain consistent ice production and dispenser performance.

You can order the replacement parts listed for model 10655616400 from the parts list for this refrigerator, or search by model number on Sears PartsDirect.

Last updated: February 2026