Whirlpool RY160LXTB02 electric slide-in range Parts

On your Whirlpool RY160LXTB02 electric range, most “error” displays clear by stopping the current function with CANCEL, then restoring normal operation by resetting the clock if needed. If the display keeps flashing (often “BAKE” or “LOCK”), treat it like a power interruption and clear it, then monitor for repeat.

• Press CANCEL once to stop the active oven function.
• If the clock is flashing, set the clock again (a flashing time commonly follows a power interruption).
• If the control panel seems locked, press and hold CANCEL and COOK & HOLD for 3 seconds (press CANCEL first) to toggle Control Lock.
• If the message returns right away, turn the range off at the breaker for 1 minute, then restore power.
• If “BAKE” or “LOCK” continues to flash after clearing and clock reset, schedule service because the control is still detecting a problem.

For the exact button layout and display behavior on this model, use the RY160LXTB02 owner's manual.

Clearing the display correctly helps you confirm whether you had a one-time power glitch or a repeatable fault. Repeating flashes after a reset point to an issue the electronic oven control is still sensing, which prevents reliable baking and broiling.

Last updated: February 2026

On the Whirlpool RY160LXTB02 electric range, the F1 E2 error points to a problem in the oven’s electronic control system, most commonly the oven control board or its keypad circuit. Clearing the code typically requires diagnosing the control and repairing wiring or replacing the control.

• Turn off power at the breaker for 1 minute, then restore power and see if the code returns.
• If the code returns immediately, stop using Bake/Broil until the issue is corrected.
• Check for stuck or unresponsive keys on the control panel (a stuck key can trigger F1-family codes).
• If you recently cleaned the panel, let it dry completely; moisture can cause false key signals.
• If you are comfortable doing basic checks, inspect for loose or damaged wire connections at the control area.

If replacement is needed, the correct electronic control for this model is the range oven control board W10769823.

An F1 E2 condition can cause the oven to behave unpredictably (beeping, canceling cycles, or failing to regulate heat). Fixing it restores reliable temperature control and helps prevent repeated shutdowns during cooking.

Use the RY160LXTB02 owner’s manual for troubleshooting guidance and the RY160LXTB02 installation guide for power and installation details that affect control-board operation.

Last updated: February 2026

On a Whirlpool electric slide-in range like model RY160LXTB02, the model number is printed on the appliance’s rating label (model and serial tag). We typically see it around the oven door frame area or behind a storage/warming drawer; confirm the exact location in the RY160LXTB02 owner’s manual.

• Open the oven door and look along the door frame (left or right side) and the front frame.
• Pull out the storage drawer (or warming drawer) and check the frame behind the drawer front.
• Look on the lower side trim near the front legs.
• If the range has a removable backguard, check the rear panel.
• For some designs, the tag is visible when you tilt the control panel forward (power off first).

• Use a flashlight; the tag is often small and low-contrast.
• Write down the full model number and serial number exactly as shown.
• Take a clear photo for parts ordering and service calls.

We use the model number to match the correct Whirlpool parts (like a bake element, oven control board, or door gasket) and to reference the right safety and installation details, including anti-tip guidance in the RY160LXTB02 installation guide.

Last updated: February 2026