Owner’s manual
View engine
What are the most common issues with 917370860?
The most common issues we see with the Craftsman 917370860 walk-behind gas mower are starting problems, poor cut quality, and self-propel/drive issues. These usually trace back to routine wear items (blade and hardware), cable adjustments, or drive components that need cleaning, tightening, or replacement; use the 917370860 owner's manual for model-specific adjustment points.
- Won’t start or runs rough: old fuel, dirty air filter, fouled spark plug, carburetor varnish
- Uneven cut or vibration: bent/dull blade, loose blade hardware, damaged blade adapter
- Poor bagging or side discharge: clogged deck, damaged deflector, mulch door not sealing
- Self-propel won’t pull: stretched/misadjusted drive cable, worn drive pawls, transmission wear
- Handle controls feel loose: control cable out of adjustment or frayed
If your symptom matches, these are frequent fixes for the 917370860:
- Cut quality and vibration: husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825, blade adapter 581473301
- Drive problems: lawn mower drive cable 586638001, drive pawl 532404845, lawn mower transmission assembly 589600601
- Discharge and mulching: lawn mower clipping deflector 532426129, mulch door assembly 532420019
| Symptom | Most likely area | Typical next step |
|---|---|---|
| Shakes badly | Blade, adapter | Inspect for bends; replace blade/adapter if damaged |
| Cuts uneven | Blade, deck buildup, wheel height | Sharpen/replace blade; clean deck; verify height settings |
| Won’t self-propel | Drive cable, pawls, transmission | Check cable tension; inspect pawls; replace worn parts |
| Clippings blow out | Deflector, mulch door | Clear clog; verify door closes; replace broken deflector |
A worn blade, loose hardware, or misadjusted drive cable can quickly turn into bigger problems like deck damage, stripped fasteners, or premature transmission wear. Keeping the cutting and drive systems tight and clean improves performance and extends mower life.
Last updated: March 2026
What model number is the Craftsman 917370860?
The model number for this Craftsman walk-behind gas lawn mower is 917.370860 (often written without the dot as 917370860). You’ll see it printed on the mower’s model label and on the cover page of the 917370860 owner's manual.
We use the model number to match the correct parts (blade, drive cable, transmission) and the right service procedures.
- Check the model label on the mower deck or rear housing area
- Look for a number formatted like 917.370860
- Write it down exactly; one digit off can pull the wrong parts list
- Use the same model number when ordering common wear items like a blade or drive parts
You may see the model number shown two ways; both refer to the same mower.
| How it appears | What it means | When you’ll see it |
|---|---|---|
| 917.370860 | Standard label/manual format | Model tag, manual pages |
| 917370860 | Same model number without punctuation | Parts lookup, online search |
Once you confirm 917370860, you can confidently match parts by description and part ID.
- Blade: husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825
- Drive control cable (self-propel): lawn mower drive cable 586638001
- Engine zone control cable: lawn mower control cable 587326601
- Transmission: lawn mower transmission assembly 589600601
Using the exact model number ensures the parts diagrams and part IDs match your mower’s 22-inch deck and power-propelled drive system, so you avoid ordering a blade, cable, or transmission that won’t fit.
Last updated: January 2026
What octane gas should I use in my lawn mower?
For the Craftsman lawn mower model 917370860, we recommend using regular unleaded gasoline (87 octane). The key requirement is fuel quality: use fresh gas and avoid blends over 10% ethanol, because the manual notes E10 is acceptable and higher ethanol can cause problems.
Use this quick checklist when filling the tank:
- Use: 87 octane regular unleaded
- OK: Gasoline with up to 10% ethanol (E10)
- Avoid: Any gasoline over 10% ethanol
- Avoid: Old or stale fuel (especially after storage)
- Avoid: Mixing cleaners into the fuel tank (can damage the fuel system)
Octane and ethanol are different. Octane is mainly about knock resistance; ethanol content affects storage stability and moisture absorption.
| Fuel detail | What to choose | Why |
|---|---|---|
| Octane rating | 87 (regular) | Matches typical small-engine needs and runs cleanly when fuel is fresh |
| Ethanol content | Up to E10 | The 917370860 manual allows E10; higher blends create fuel-system risk |
| Fuel freshness | Fresh, in-season gas | Helps prevent hard starting, surging, and carburetor issues |
If you will store the mower for 30 days or longer, we recommend running the engine until the tank and carburetor are empty, then refilling with fresh fuel next season. Alcohol-blended fuels can attract moisture and separate during storage, which can damage the fuel system.
Using the right gas helps your Craftsman mower start easier, run smoother, and reduces carburetor and fuel-line problems that often show up after storage.
For model-specific fuel notes and safety guidance, follow the 917370860 owner's manual.
Last updated: January 2026
