Craftsman 917286260 tractor Parts

For a Craftsman riding mower like model 917286260, the most reliable way to identify the year is to read the serial number on the product ID tag and decode the date portion. We recommend confirming the tag location and serial format in the 917286260 owner's manual.

On most Craftsman front-engine lawn tractors, the product ID tag is typically in one of these spots:

• Under the seat pan (lift the seat)
• On the rear fender area near the seat
• On the frame rail near the engine compartment
• Near the transaxle area on the frame

Many Craftsman mowers use a 6-digit date code at the start of the serial number:

• Digits 1-2 = month
• Digits 3-4 = day
• Digits 5-6 = year (last two digits)

If the serial begins with 071294, that reads as July 12, 1994.

Use this as a fast reference when you are looking at the tag.

Knowing the build year helps you match the correct parts and specs (deck components, belts, and electrical parts) for your Craftsman tractor, especially when there are mid-year design changes.

Last updated: February 2026

On a Craftsman riding lawn tractor like model 917286260, you can look up the model number by finding the model/serial tag on the tractor and matching that number when ordering parts or checking specifications in the 917286260 owner's manual. The tag is typically on the frame under the seat.

Check these common locations on Craftsman front-engine lawn tractors:

• On the frame under the seat (lift the seat up)
• On the underside of the seat pan
• Near the rear fender area, close to the seat mounting points
• On the frame rail near the engine compartment (less common)

After you locate the tag, use the full model number exactly as shown (including dots or extra digits if present) to:

• Confirm the correct parts list for your tractor
• Match the correct mower deck size and drive system parts
• Verify maintenance items like belts and blades
• Reference operating and safety instructions

Craftsman tractors often share similar looks across multiple model numbers, but parts like a ground drive belt, deck blade, or starter solenoid can vary by model and production run. Using the exact model number prevents ordering the wrong part and saves time on repairs.

Last updated: February 2026

Yes, replacing the engine on your Craftsman lawn tractor model 917286260 is worth it when the tractor’s deck, transmission, and chassis are solid and the total engine-swap cost stays well below the price of a comparable replacement tractor. If multiple major systems are worn, replacement makes more sense.

• The mower deck is straight (no cracks, severe rust-through, or broken welds)
• The transaxle drives smoothly (no slipping, whining, or loss of motion when hot)
• Wiring and safety switches are intact (no hacked harnesses or bypassed interlocks)
• You can source the correct engine and mounting hardware for this frame
• You want the reliability of a fresh engine for regular mowing

Use this as a practical way to decide.

The 917286260 manual points to frequent causes of no-start or poor performance such as weak/dead battery, corroded terminals, loose wiring, faulty ignition switch, and faulty solenoid/starter. Confirm these basics first using the 917286260 owner’s manual.

• Charge and load-test the battery
• Clean and tighten battery cables and grounds
• Check fuses and wiring connections
• Verify the brake pedal is fully depressed and the attachment clutch is disengaged
• Inspect for fuel or oil leaks and clean debris buildup (fire risk)

An engine swap is a big investment; if the real issue is electrical, fuel delivery, or deck drag, you can spend a lot and still have a tractor that runs poorly. A quick diagnosis protects your budget and gets you back to a reliable cut.

Last updated: February 2026

Craftsman riding mower model 917286260 uses a low-emission gasoline engine with electric start. The exact engine make, model, and displacement for your tractor are listed in the Product specifications section of the 917286260 owner's manual, along with the tune-up and maintenance requirements.

Use these quick checks so you buy the right filters, spark plugs, and starting parts:

• Find the engine ID label on the blower housing, valve cover, or near the muffler.
• Record the engine model, type, and code exactly as shown.
• Match that information to the Product specifications section in the 917286260 owner's manual.
• Confirm your starting system is electric start (battery, key switch, solenoid).
• Use the engine ID when ordering engine-specific parts (air filter, fuel filter, carburetor parts).

The operator documentation for Craftsman 917286260 calls out these model-specific engine-related details:

Engine identification prevents wrong-part returns and speeds up troubleshooting. For example, if the engine clicks but will not crank, the issue is often in the starting circuit; a common service part is the lawn tractor starter solenoid 582042802.

Last updated: February 2026

The model number is 917286260 for this Craftsman front-engine lawn tractor. On the tractor’s ID label and in documentation, you may also see the same model written with a dot as 917.28626; use the exact characters shown on your label when ordering parts. See the 917286260 owner's manual.

We use the model number on the product identification label to match the correct parts diagrams (deck, drive, steering, and electrical).

• Under the seat or on the seat pan
• On the frame rails near the rear wheels
• Near the engine compartment or under the hood
• On the product label near the footrest area
• On the manual cover page

For Sears PartsDirect parts lookup, enter the model as a continuous number (no spaces).

Using the exact model number ensures the parts you choose fit your specific tractor configuration, especially for high-variation items like mower deck blades, belts, and mandrel assemblies.

Last updated: February 2026

The model number for this Craftsman front-engine lawn tractor is 917.28626 (often written without the dot as 917286260). You can confirm it on the model tag and in the Craftsman 917286260 owner's manual.

Check these common locations on Craftsman riding mowers and tractors:

• Under the seat on the fender pan
• On the frame near the engine compartment
• Near the rear axle or transaxle area
• On a label under the hood (on some versions)

It is normal to see the same model shown in different formats.

Using the exact model number helps us match the correct diagrams and parts for your deck, drive system, and electrical starting circuit. For example, the correct lawn tractor starter solenoid 582042802 depends on the right model identification.

Last updated: February 2026

The Craftsman model 917286260 lawn tractor uses a 42-inch mower deck (42 in. cut). This matches the operator manual for model 917.28626, which identifies it as a 42-inch mower setup; use the 917286260 owner's manual to confirm deck details for your exact configuration.

• Check the deck shell for a stamped size (often near the discharge chute)
• Measure blade tip-to-tip across the cutting path (with blades aligned end-to-end)
• Verify the deck model/ID tag if your tractor has one
• Compare your blade style to common 42-inch deck blades

Many 42-inch Craftsman decks use two blades and a deck belt routed around mandrel pulleys and idlers. If you are servicing the deck, these parts are commonly involved:

If you are chasing vibration or a wobbling blade, the lawn tractor mandrel shaft assembly 587819701 is a common deck repair part to inspect.

Deck size determines the correct blades, deck belt routing, and leveling specs. Using the wrong blade length or belt can cause poor cut quality, excess vibration, and premature wear on mandrels and pulleys.

Last updated: February 2026